Questions & Answers - Recent questions tagged relay

THAR-ONE-MAZ5

Thu, 16 Jul 2026 20:40:19 +0000

I read for Evo One if I don’t use the T harness and proceed to install directly I require to install 2 diodes for the pts and a relay for the parking lights, my question is the THAR-ONE-MAZ5 have the diodes included and the relay? I see a small relay not sure if that for the pts or lights, I will appreciate if you can explain. THAR-ONE-MAZ5

Relay clicks 3 times when releasing brake pedal while driving.

Sat, 04 Oct 2025 04:52:15 +0000

When I release the brake pedal while driving I hear a relay clicking 3 times. This happens intermittently. Some days it happens every time I release the brake pedal, some days it doesn't happen at all. This never happened for years after the original install, but started happening a few months ago.

Installed on 2013 Mustang GT, manual transmission, with option 33.2 enabled.

EVO One with THAR-FOR1 t-harness.

Relay only needed for OEM fob remote start?

Fri, 08 Dec 2023 10:13:57 +0000

2020 Kia Forte, standard key. I saw on another site that you only have to hook up the relay if you want to remote start using the OEM remote. If we only plan to use a RF kit and their remotes, is it possible to bypass this part of the install?

EVO-ALL PARKING LIGHT RELAY CONNECTION

Sat, 18 Dec 2021 09:27:59 +0000

Looking at the instruccions on Guide # 95081 for 2012 Ford Escape using EVO-ALL and THAR-FORD4 (standard key), it shows Brown/White output goes to a Parking Light Relays. That relay is what's already in the car or it should be added separately?

Activate aftermarket heated seats with EVO-One

Wed, 04 Dec 2019 10:36:35 +0000

Is there a way to have the EVO-One turn on an external relay that I can use to send power to aftermarket heated seats once the car is started?

2009 ford focus where does the relay install at, and now my wiring code is locked

Sun, 28 Jan 2018 14:49:17 +0000

im installing remote start for my mother in law. the issue im having is none of the instructions show where this relay installs at. and now my wire code is locked. i dont understand what im missing. i just dont think i should have to pay to look agian. just doesnt seem fair.

victor

Do you have door lock and unlock interface wiring for Toyota Highlander 2007 ?

Sun, 16 Jul 2017 13:28:37 +0000

My car is Highlander 2007 without immobilizer. I need a wiring diagram for door lock and unlock function. Do I need a relay and diodes to have this work ?

Just bought a Fortin int-sl+ and Compustar cs800-s remote starter

Tue, 06 Jun 2017 01:05:25 +0000

Will i still need to add any relays or resistors for:

Factory Alarm Desarm, Power Locks and Parking Lights ?

on my Jeep Grand Cherokee 2004

Please Help with this

2006 Dodge Dakota - Relay & Wire Gauge

Wed, 11 Jan 2017 23:00:01 +0000

I am getting ready to install an EVO-ONE w/ T-Harness in a 2006 Dakota. The instructions say that a relay is used. What size relay should it be? What guage wire should be used for tying into the 12v, accessory 1 and accessory 2 wires? The green wire coming from the EVO-ONE is only 18 ga.

What are the proper functions, modes, and wiring for anti-grind and starter kill

Sat, 24 Dec 2016 12:06:01 +0000

I am looking to add anti-grind/starter kill on my 2014 Toyota Tundra.

Here is the setup I am planning on using.

- Function 32, Mode 4. (dark blue wire A8 set to "starter-kill")

- Function 10, Mode 1. ("starter-kill and anti-grind")

- Wire in a spdt relay using the normally closed circuit. With Ignition 2 and the dark blue (A8) wires hooked up to the positive and negative side of the coil respectively (posts 86 and 85)

Is this correct?

How do you hook up door locks in 2004 Toyota Highlander?

Fri, 04 Nov 2016 12:35:25 +0000

There is the Purple unlock wire, Gray lock wire, and the brown wire. In order to lock the vehicle it says you need to break the brown wire, and in order to unlock the vehicle, you need to send a pulse the brown in addition to the purple. I was looking around and wirecolor says to use a relay. I hooked the relay up to break the brown wire using the door lock to pulse the relay and isolated the brown wire with a 3 amp diode. The unlock works perfect, but in order to lock i need to press it 3 times in order for it to lock. does anyone know the proper way to set this up as I must have something wrong

Are relays still necessary for transponder and parking lights as it says on wirecolor?

Tue, 11 Oct 2016 11:37:48 +0000

Fortin install instruction doesn't mention but wirecolor shows 2 being used.

What relay to use during Subaru Legacy EVO-ONE installation

Mon, 15 Aug 2016 20:20:27 +0000

I am following Guide # 46701 for a 2012 Subaru Legacy. It says one relay is required for installation, but dosen't give specs as to what kind of relay.

Would a relay such as these work? https://www.amazon.com/dp/B017VDI0GY