Questions & Answers - Recent questions tagged remote-unlock

Pathfinder '22 EvoALL wont start,lock,unlock

Wed, 29 Mar 2023 22:42:18 +0000

Hi,

I installed Evo ALL on Pathfinder 2022 using TNIS7 harness and Crimestopper rf kit. Installation was straight forward, programming was easy as well. When I try to start car it will not. Using factory fob, car receives CAN signals (blue led blinks) and dashboard lights up. Using rfkit remote, lock unlock dont work (only lights flash, door will not lock unlock). When try to start car using rf kit remote, first it locks door, dash turns on and thats all. Evo sends CAN signals(blue) and recognize Ignition (yellow).

When I programed module I turned bypass hood switch on in options and picked Crimestopper rfkit (but this should not matter because 3xLock doesnt work either). I used firmware 92.05 (instructions states to use 92.04)
s/n: 001A07019830

Any advice, what am I doing wrong?

Thank you in advance.

Will not lock driver side door

Mon, 02 Jan 2023 12:59:46 +0000

When using auto start or just locking doors. The vehicle will not lock or unlock the driver side door. 2016l5 Toyota rav4.

Door locks

Sat, 27 Aug 2022 16:23:52 +0000

Installed an evoall and tbvw in 2016 Golf. door locks don't lock or unlock while car is running. Factory remote will shut off the car via lock unlock lock. Can evoall unlock the doors without adding a complete starter unit?

Or can a relay be added and hardwire unlock?

Thanx in advance

Michael

locks do not work

Fri, 26 Nov 2021 15:31:02 +0000

having issue with door locks have all wires hooked up as per diagram and they do not work at all checked for pulse front starter and it is sending one. am i missing something or is there another way to wire door locks. can bus would not program either had to set tach to wirless there is no bypass in car. thanks

2015 Nissan Sentra Pts unlock does not work on autostart remote

Sat, 16 Oct 2021 20:11:03 +0000

I have installed evo-all and autostart 2386 unit. Install guide 74271. Unlock button on autostart remote will not unlock doors. Parking light flashing indicating unlock command sent by autostart remote and received by car.but car doesnt unlock.

I triple checked all wirings. I changed autostart module for another same one but no change as far as unlocking doors.

All other function and features work as advertised by all means..except unlocking doors on autostart remote.

?

Door lock and unlock does not work on RF942

Wed, 06 Oct 2021 20:38:56 +0000

Jetta 2016 standard key

With the RF942 remote:
Remote Start & Stop works fine
Door lock, module clicking once but nothing happens
Door unlock, module clicking twice but nothing happens
Also tried trigger wires, purple a2, purple/white a3 with same results as the rf remote, clicking but nothing.

A5 is turned off
and
Green/Red wire(A18) is connected to Mux Lock/Unlock Blue/Red wire at BCM connector A (black) pin 24.

Evo-vwt3 (evo-all, t-harness, vw-tb)

08 Lincoln MKX Thar For4 w2w viper 4806 alarm does not disarm with RS door unlock

Tue, 20 Apr 2021 13:31:04 +0000

Guide 89121 wire to wire

firmware 71.49

sn 001a07 150161

Alarm goes off when using RS unlock button when opening door

trunk only opens with car remote started. Does not open with car resting

Viper alarm doesn't have option to pulse ignition and gwr when unlocking door
it has a wire used to disarm alarm

what options do I have

EVO-ONE-TOY9, Remote open sliding doors when vehicle is running

Sun, 24 Jan 2021 14:54:10 +0000

I recently installed the EVO-ONE-TOY9 in my 2015 Toyota Sienna and it is working great! I have just one question: is it possible to enable the use of the open sliding door buttons on my factory keyfob when the vehicle is running?

2015 Toyota Sienna remote unlock not working

Thu, 07 Jan 2021 11:26:01 +0000

I installed EVO one with T-harness with H-key. The module was programmed to work with OEM key (3 lock start). Everything worked as designed for over a year but lately when the minivan is started using OEM remote, the car does not unlock the doors. When the car is running on the remote start and the unlock key is pressed, the parking lights dim or flickr indicating that the signal is received but the doors stay locked. It used to work fine and no rewiring or other work was performed to the car. Also, one time when remote start cycle was complete the parking lights stayed on even after the car was shut off after completing 10 or 15 minutes remote start cycle.

Which wire is the negative pulse from door lock module for kia soul 2014 in kick plate harness.

Sat, 02 Jan 2021 05:56:08 +0000

Hello. I cant seem to find where the negative door lock wire is in the wire harness to get a negative pulse in my 2014 kia soul. please help. Thank you!

OEM KEY DEATH AFTER START

Tue, 29 Dec 2020 20:15:08 +0000

2020 Kia FORTE with EVO ONE and T-Harness. Once the car is started, the keys do not respond. Could you give us a solution? After checking the possible solutions that you offer us on your website, none have worked for us. Thanks in advance.

Can’t open the doors once vehicle remote started

Tue, 28 Jul 2020 09:55:46 +0000

Hi there, can you please confirm the correct installation and programming sheets for my set up please.

2006 Nissan Pathfinder (Thai made)

evo one

t harnes 2

stand alone

RF 64 2W

I have eventually been able to program it, i can remote start with the Orem key and the RF 64,s. However once running I can't operate the doors until I turn off the vehicle.

2012 Kia Soul standard key rf641w not unlocking and locking vehicle

Tue, 19 May 2020 13:05:11 +0000

2012 Kia Soul standard key no immobilizer. Using thar-one-khy1. I am using the tachless mode. I have programmed 2 rf641w keys successfully, however they do not unlock and lock the vehicle properly. I even tested the wires to ground to verify ground control and that was better than the module was doing. So here's the behavior:

Lock: will not work unless I lock the car with the oem remote period. making me think the evo module is storing status incorrectly or is unaware.
Unlock. Works if I press the unlock button 3 times
- I have also tried adjusting option 8 for this with no luck. (unlock pulse adjustment)
Kill start - I am unaware, but is there no feature to kill the remote start and turn the vehicle off via the remotes?

Thanks in advance.

2010 CC Sport factory alarm triggers when unlocking from viper 5704 remote- using evo all

Mon, 09 Mar 2020 10:25:27 +0000

Remote start and door lock-unlock works properly. Door locks-unlock through can bus using Evo All. External relay to pulse ignition using viper door unlock to "energize" can bus. Unlocking with viper remote after car sets for an hour or so, factory alarm triggers

EVO-ALL THAR-NIS1 (when the engine is running, the standard keychain does not work)

Tue, 24 Dec 2019 19:05:42 +0000

I have Infiniti G37S coupe 2009 on the European market, everything is connected by the manual, but when the engine is running, the standard key fob does not work, you can open the car only with a metal key, just when you open the door, does the engine stall, what did I do wrong?

08 Nissan Pathfinder - RF642W Lock Button Locks, Unlock Button Locks, Programming Settings or Wrong Wire?

Fri, 13 Dec 2019 16:25:41 +0000

2008 Nissan Pathfinder S - Standard Key - OEM Alarm

Fortin EVO-ONE With NIS2 Harness

Guide Followed: 75611

Unit was flashed to recommended/newest firmware prior to install.

Service No: 002B07 200206

Everything is installed and working (As far as the Remote Starter Goes). When using the OEM Remotes the vehicle will lock and unlock as it always has. However, when using the RF642W remotes, The remote start works flawlessly (Push button, parking lights on, start/Crank, Run) The lock button locks the doors, but the unlock button also locks them (and does not unlock). The OEM Remote will unlock the door as normal with the remote starter running, but I would really like to not have to carry two remotes with me.

Vehicle Running

Oem Remote: Only Solid Yellow is on, No Blue Flashes

RF642W: Lock - Solid Yellow, Blue Flash - Locks Doors
RF642W: Unlock - Solid Yellow, Blue Flash - Locks Doors

Did I miss a step? Enable/disable a wrong option?

Any help is greatly appreciated. Thank You in advance.

Honda civic 06 EX standard Key. Car then remote started. OEM remote unlock is not working.

Wed, 04 Dec 2019 15:25:03 +0000

Honda civic 06 EX standard Key.

Installed EVO One (updated with latest firmware1.24 aka 0.60, Hardware rev 4). D2 is off.

Wiring is according to the installation manual using Tharness Hon1, Rev 1.

Car remote startedusing 3x oem lock press. 3x lock stops the engine and then it unlocks the driver door.

If i remote start and then press unlock on OEM remote, it blinks the parking lights but will not unlock the door which is an issue.

I did connect the lock unlock wires on driver boot side clip. Also Tharness yellow wire is cut for IMMO + connections

SN 002B04 044514

2011 VW Tiguan - EVO ALL Stand Alone Remote Start w/ OEM Key COMPATIBLE?

Sun, 01 Dec 2019 12:18:45 +0000

I see some conflicting info out here that has me concerned an EVO-ALL will not work properly for a stand alone remote start install on a 2011 VW Tiguan.

1) My 2011 Tiguan is technically "push to start" with a transponder chip FOB to allow a start without a true keyed ignition. The install guides reference a STANDARD KEY install, but do show the key FOB wire looping to bypass the transponder. I just want to be sure upon entering the vehicle after a remote start I would do what... "push the start button and brake" to confirm I had entered the vehicle to simulate turning a manual ignition key to ON? Or is this a dealbreaker?

2) One of your techs stated that on a 2011 VW Tiguan NO REMOTE UNLOCK is possible with the OEM FOB after a remote start. Is this true? And if YES, how the heck would I get into the vehicle after a remote start locked the doors and fired up the ignition? The manual emergency key? Here is the thread...

Also, turn OFF D1 in the bypass options.

commented Dec 24, 2014 by Robb

Ok thanks a lot , now it starts , one more question how do I get the remote to unlock while the vehicle is on , the remote won't function while the car is on , thanks

commented Dec 24, 2014 by Ivan Flores

By factory, the remote does not work while the vehicle is started. It's written in the guide and the website that the remote will not function on remote start. Unfortunately, there is no way around this.

commented Dec 24, 2014 by Robb

Thank you for the support! Great forum and websitre you have here!

MAZDA CX-9 2012 INTELIGENT KEY EVO ALL+TARANTULA RS3 PROBLEM

Mon, 04 Nov 2019 14:27:58 +0000

I installing evo all+tarantula rs3 to mazda cx9 2012 with ineligent key .

all prog and connection is correst but if option on on evo all unlock door ,start engine and lock car ( disarm car alaram) windows and sunroof is opened if this function is off the car alarm turns on .

what can i do to privent the windows and sunroof from openning

Unlocking all doors after remote starting

Sun, 03 Nov 2019 18:30:25 +0000

2019 Mazda CX-5 push to start, installed with EVO-ONE and T-harness

All sucessfully installed with suggested options, remote start works great

but after remote starting, im only able to unlock driver side door with OEM remote

which option do i need to unlock all doors?

*I tried the options that says "unlock driver side door when unlocks once, and unlock other doors if pressed twice" on the bypass options, it didnt work.

When pressing unlock button vehicle locks instead of unlocking

Sat, 22 Jun 2019 16:38:59 +0000

EVO-VWT1 with RF642W, 2017 Jetta push to start.

When pressing unlock button vehicle locks instead of unlocking

Lock, start, aux buttons do nothing, although i see visual led confirmation on antena.

OEM remote 3x lock start works fine.

Firmware up to date, install was done over a year ago and everything worked fine untill recently.

Antena cable has no visual damage.

2015 A8 Door Handle Sensor won't work after remote start

Mon, 18 Mar 2019 09:19:25 +0000

I recently installed and programmed the EVO-ALL on a 2015 Audi A8 successfully. However, the door handle sensor does not work after remote starting and have to unlock by using the key fob. When the car is off, the door handle sensors does work. So is there a setting that I'm missing?

2017 Kia Forte remote started but no unlock from oem remote

Tue, 19 Feb 2019 21:48:29 +0000

I can get the evo one to program and remote start but the oem key fob isn't working. No unlock from oem key fob.

Will the OEM remote work to unlock door after the remote start is engaged

Tue, 15 Jan 2019 16:25:04 +0000

After installing a EVO ONE remote start on 2018 Toyota Tundra, I couldn’t unlock the door with OEM remote, had to do it manually,is there anything else I can do to make the locks work after engine is running?

2015 Ford Kuga PTS can't open doors while remote started

Thu, 13 Dec 2018 06:54:17 +0000

Hi! My Kuga have only keyless start but doesn't have keyless entry (Trend+ trim - one step lower than Titanium). Is there still no solution to open doors with oem fob while car is remotely started by evo-all standalone? When I press unlock button I see that fortin detect it by blinking with blue LED but nothing happens.

I've connected A5 and A19 pins to unlock and lock signals of BCMkuga, turned option A1 on - no use.

mazda 3 2012 standard key with evo-one : vehicle is not unlocking and alarm starts when remote starting the vehicle

Tue, 04 Dec 2018 00:19:55 +0000

Need help.

Problem 1: the car don't unlock. I hear the lock mechanism, but it's like if the car is locking instead of unlocking. The flashers flash twice. The lock command works fine (flashers flash once).

Problem 2: when I remote start the car, the alarm starts. I have to unlock the car from the oem remote to stop the alarm.

I installed an Evo One in a Mazda 3 2012 standard key using the regular installation instructions https://cdn02.fortin.ca/download/29661/evo-one_ig_reg_bi_maz-2-3-tribute_2001_key_b_29661.pdf

I connected all the wires directly, without any resistor.

The only wire I didn't connect is the "Parking Light" (E1).

The analog door lock wire (green/red A18) was connected to the dark green wire in the BCM driver kick panel (wirecolor pin 127,129) without any resistor.

All the firmwares are the latest.

Did I do something wrong?

Is it because of the parking light wire (White E1) that I didn't connect? I didn't find the wire on wirecolor. Is it accessory 2?

Is it because I didn't use the 1 Kohm resistor as on wirecolor for the analo door lock? How can I use a resistor for lock but not for unlock when using a single wire?

Do I have to activate/disable any option on the unit (evo one)?

Please help.

Thanks,

André

Car starts on 3 lock press of OEM Key, but after start it won't respond to OEM Remote

Sat, 22 Sep 2018 16:14:42 +0000

I have installed the EVO-ONE using T-Harness (TAR-ONE-HON2) on my 2016 Honda CRV, the car starts with OEM remote, but after the start the functionality of the key is lost, I can't unlock the vehicle or engage 3-lock sequence to shut off the remote starter.

2016 kia soul singal or double pulse for locks

Mon, 09 Jul 2018 13:44:04 +0000

Do i need a single or double pulse for the locks to work correctly .I had it set on single pulse .25 sec but locks dont seem to unlock all the time . except driver side.

Already reprogramed the unit again followed programming for no ems wire or becuse this is hooked up to the can bus should i use the other programing methed .

2016 kia soul canbus

Wed, 04 Jul 2018 15:23:18 +0000

On the evo one remote start is hooked up through can bus but seems to have a hard time with lock and unlock function . My question is if I have the can bus hooked up can I also hard wire the triggers in or is it one or the other when being installed

Issue programming crimestopper revo 1.1 to evo-one - 2016 KIA Soul

Fri, 18 May 2018 11:23:34 +0000

Everything else on the installation has gone fine per the instructions for programming the EVO ONE module. However, the module will not change from the YELLOW LED when turning the key to the ON position when trying to program the Crimestopper REVO remotes.

I do see that others mentioned that they downgraded the firmware to 1.16, but those posts are two years old at this time... Is this still necessary? It also seems that, the OEM key buttons will not work once the car is remote started??

I thought the purpose of buying the additional RF kit was to have the OEM keys work to unlock the vehicle remotely, after the car has been started remotely??

Any help would be greatly appreciated.

2016 kia soul standerd key oem key fob no control once remote started.

Tue, 27 Mar 2018 13:20:09 +0000

with the evo one in remote start the oem key fob has no control over the door locks or the arm or disarm of the evo one. in the settengs i have the oem remote settings enabled on both the remote start and alarm side or is there something that I am missing.or not set correctlly.

2017 Transit Remote Unlock - Stops Working After 20 Minutes

Wed, 21 Feb 2018 18:45:10 +0000

I'm trying to use the EVO-ALL with a cellular modem to remotely unlock the vehicle. The EVO-ALL has been flashed with the latest firmware and was successfully programmed to the vehicle for CAN bus only (blue LED flash pattern displayed).

Everything unlocks properly if the EVO-ALL purple/white wire (unlock) is briefly grounded within 20 or so minutes of the vehicle ignition turning off.

If the vehicle is locked with the OEM keyfob (lock button pressed twice) and 20 minutes elapses with the ignition off, the EVO-ALL stops unlocking the vehicle. Grounding the purple/white wire causes the EVO-ALL's blue LED to briefly flash, but nothing happens on the vehicle.

Based on the two diodes coming off the EVO-ALL white/red wire (ignition/accessory), I'm thinking this wire should be providing voltage momentarily prior to unlock, but no voltage ever appears on it. If this wire is used only for remote start, then this wire isn't relevent in our scenario.

Any ideas?

How to make RAV 4 OEM Remote unlock door while remote started

Mon, 19 Feb 2018 20:03:37 +0000

I just installed an EVO ONE with a toy 8 t-harness in a 2015 RAV4 H key. I set it up to use the 3x oem lock button to start. Everything works great, except the door will not unlock using the oem remote while remote started.

is it possible to to use the remote to unlock the door while running? Did I program something wrong? I have updated all the software to the latest version. Do I need to use a RF Remote?

Thanks

2012 Chevy Equinox, want to use the OEM remote to unlock doors after remote start

Sun, 18 Feb 2018 15:57:22 +0000

Installed EVO-All EVO-GMTx preloaded on a 2012 Chevy Equinox

After programming using OEM remote lock 3x remote start works fine, when i open the door and touch the brake the car shuts off as it should but it locks the doors. Also after the car is remote startet the OEM remote lock/unlock will not work.

How can i diseble the lock condition after remote start stops by touching the brake!

Also how can i get the OEM remote to lock/unlock after remote start!

Please advise

2014 VW Tiguan w/ EVO ALL remote starts, but the OEM keyfob is not detected when approaching the car.

Wed, 03 Jan 2018 14:23:13 +0000

Installed an EVO All in a 2014 tiguan using guide #65501 and a T Harness. The car remote starts fine, but when the driver approaches the vehicle with the smart key it is not detected. They have to use the physical buttons on the fob to unlock the doors. Is this the way it is supposed to work, or should it receive the signal as it does when not under RS?

thanks

OEM remote lock/unlock not working while vehicle is running on 2006 Honda Odyssey

Fri, 17 Nov 2017 20:51:40 +0000

I have a Fortin EVO ALL with a Crimestopper RS1-G5 remote starter on my 2006 Honda Odyssey.

Remote start works great but I can not lock/unlock with the OEM remote while the remote start is active. When I press the lock/unlock buttons on the remote, the blue light on the EVO-ALL activates. If I manually unlock the doors with the key, the sliding door button on the OEM remote still works. I did not hard wire any connections to the lock/unlock wires as I thought the D2D connection between the starter and EVO-ALL would take care of that.

I searched and firmware is 4.18. I don't own a unit to upload the latest firmware. Would the update allow for the OEM remote to control the door locks while the engine is running? I've read mixed information on this. Or should I hardwire the lock/unlock wires to the EVO-ALL?

2012 Tundra - 3x Lock trips panic, keyless does not work after remote started

Thu, 21 Sep 2017 16:32:23 +0000

I have had the Fortin Evo One remote starter installed for nearly three months, and it has worked flawlessly until yesterday. The 3X lock will now almost always (but not every time) cause the factory alarm to go off. It will also remote start the truck in the process, but will not allow me to use keyless to unlock/lock the vehicle. The running lights flicker when I press the unlock key on the fob, but nothing else happens. Two indicator lights, the Traction Control and ABS lights, turn on and remain on even after a successful/uneventful remote start. Any ideas?

Door Lock Pulses.

Tue, 06 Jun 2017 04:42:43 +0000

Hello.

Does anyone know what I should set the lock pulse (single/double) and duration for a 2017 Chevy Cruze. I am using an Evo One with Xl202 range extender.

Thanks

Using Drone app to lock/arm car and when using the OEM remote key fob to unlock alarm trigger when opening the door

Thu, 01 Jun 2017 06:22:18 +0000

So I finally got the Evo-one/Drone to work with my 2005 Honda Pilot over the weekend. However while using the Evo-one/Drone app to lock/arm the car and when I use the OEM key remote fob to unlock while opening the door trigger the alarm. When the alarm is trigger can't use the OEM key remote to disarm, only Drone app that was use to arm the car will disarm it.

While I use the OEM key remote fob to lock/arm the car, I can use the Drone app to unlock/disarm the car and able to open the door without trigger the alarm. Is there a setting in the EVO-ONE that I need to change in order for the alarm to turn off when I use the OEM remote to unlock/disarm the car when the Drone app is use first to lock/arm the car? Or is that not possible

2017 CX9 Push To Start - Cant unlock car after remote start - Evo One

Sat, 20 May 2017 22:57:29 +0000

Hi

Car - 2017 Mazda CX9 Push To STart

Fortin - Evo One, Maz THAR-MAZ2, Fortin Flashlink 4

Evo Number - 002B02164087

Guide Used - 65561

Vehicle has been succesfully wired in and Dcrypted. Once i remote start however i am unable to get access to the car till the remote starter time runs out and turns off. Remote fob unlock doesnt work, Passive door unlock request button does not work on teh vehicle either

Please advise how i can enable remote Fob control whilst remote starter is running?

Also can i turn remote start off via the remote after i have remote started?

cannot unlock the door after remote start the car

Mon, 06 Mar 2017 13:23:33 +0000

Hi,

After I remote start the car (07 Sequoia), I cannot unlock the door, so I have to either shut it off or insert the key mannually and open it.

What could go wrong

Thanks

Ignition activates when unlock is pressed

Sun, 08 Jan 2017 20:08:56 +0000

The ignition turns on when you go to unlock the doors with the remote fob. Just for a second or two. Is there a option that I need to activate with the programmer? It could possibly be the remote start. It's an over seas unit purchased on amazon by the customer. Didnt have time to diag remote start. It starts the engine and locks the doors with no problem. 2014 f150

2012 Focus wont unlock with RF642W

Tue, 06 Dec 2016 21:52:37 +0000

2012 Ford Focus wont unlock doors with RF642W remote (locks fine)

Connected everything according to diagram, center lock/unlock button and green/purple wire behind door kick panel.

Start and Shudwon works, lock works but wont unlock.

Remote Lock/Unlock does not always work on EVO ONE

Sun, 04 Dec 2016 14:09:25 +0000

I tested this in the vicinity of the truck to observe what happens inside the cab:

The truck was locked and off for at least an hour.

When operating the remote to unlock the car (Toyota Tundra 2016) the dashboard lights up and external lights flash once. A quiet click but the driver side door does not unlock. A second press on the remote and the cycle repeats but nothing unlocks.

I then use the key to unlock the door and open. No alarm sounds so it means the alarm is disarmed but the lock function is not working properly.

This happens about 50% of the time. The other 50% the doors unlock as expected.

I should add that if I were to use the keys to unlock the car before using the Unlock key on the remote the alarm goes off as exepected.

I have the four key remote and was programmed per the instructions. I should also add that the remote start and the lock (with confirmation) works reliably each time.