Questions & Answers - Recent questions tagged rfk912

How to select mode with RFK912 for EVO-ONE function programming?

Thu, 08 Jan 2026 03:02:18 +0000

I have an EVO-ONE module with the RFK912 kit that's working great. Installed in 2008 Ford Fusion 3.0L SEL

I want to program certain functions (ex function #38, so i can change the remote start sequence from 3x Lock to Lock Unlock Lock).

There is NO guide I've found that shows how to select the Mode (1 thru 6) with the RM912 one-button remote.

For the 4-button remote, you select the mode as follows:

MODE 1 - LOCK
MODE 2 - UNLOCK
MODE 3 - START (3 SECONDS)
MODE 4 - FUNCTION (3 SECONDS)
MODE 5 - FUNCTION LOCK
MODE 6 - FUNCTION UNLOCK

So my question is: Whiile function programming, how can I select the mode with the RM912 1-button remote?

NOTE: FlashLink Manager V4 does not show any options other than A1-A11, B1, C1, D2-D5, and D6. I'm using flashlink lite adapter. Only the BYPASS tab is visible.

Hello! Will RFK912 & RFK942 shipments return for normal pickup?

Sun, 01 Jun 2025 01:28:59 +0000

Hello!
Will RFK912 & RFK942 shipments return for normal pickup?
I am looking to purchase this item, but no matter where I look online, it is not in stock and I am still unable to purchase it.
When will I be able to purchase it?

RFK912 on evo all works fine and starts, but after 24 hours, the remotes will not work until fobs are reprogrammed.

Sun, 02 Feb 2025 23:24:55 +0000

I have an evo all on my 2023 tacoma PTS. Installed the unit fine and works fine with factory fob. I installed the RFK912 kit to it followed programming directions and was able to successfully program my two remotes and those remotes work fine to remote start for about a day, then they stop working. factory remote starts the truck fine but RFK912 remotes no longer work. I have to reprogram the remotes to the evo all and they start working again for about a day, then they or the unit lose programming and I have to relink again. What am I doing wrong? Units were both brand new so Im thinking the batteries should be fine. Is there a step Im missing?

Security light keeps flashing while driving even after key take over

Sat, 18 Dec 2021 00:24:47 +0000

I have the RFK 912, my wiring is correct but when i go to do key take over with the key turned to the run postion and press on the break the attena acknowleges and gives me a solid green light but shortly after it starts to flash again. Even restarting the car doesnt seem to work, the only time it doestn flash is when the car is off and i go to unlock it with my RFK Fob

I have the evo one for reference

SN: 002B04220286

1 of 2 RFK 912 Remote Will Not Pair to Evo-One

Sat, 05 Dec 2020 13:01:31 +0000

The vehicle is a 2017 Mazda CX-9 with EVO One previously installed. I added the RFK912 two way remotes and antenna, but only one remote programs successfully to the antenna. The second remote lights go solid blue-flashing blue five times-solid red briefly with a beep while holding the button. I have confirmed that the antenna LED is flashing blue in learn mode.

After programming attempts, the vehicle does not respond to the second remote but the first one works fine. The factory remotes start the vehicle with Lock-Lock-Lock, too.

I have already ensured that the EVO-One and antenna are flashed to the latest firmware.

Remove Remote link from antenna

Sun, 02 Aug 2020 19:57:53 +0000

While programming RFK912 KIT for one of my friends, a problem was there and i tried my remotes that operate my car, and finally everything is sorted out, but i have a problem now, my rfk912 remote is starting both cars now !! , how to remove my remote from starting his car now ??

Engine error light - B2102 - IGNITION RUN/START INPUT CIRCUIT HIGH"

Wed, 22 Apr 2020 09:26:43 +0000

HI,

I have Evo-All + RF kit 912 on Jeep Wrangler 2012.

All works fine, very happy, but when Remote start the jeep I have an error on dash.

With obd computer the error is: B2102 - IGNITION RUN/START INPUT CIRCUIT HIGH"

I can clear the error, but at next remoted starts it come back.

With standard key the error dont appear.

Any idea to solve?

Thanks