Questions & Answers - Recent questions tagged ridgeline

2019 Ridgeline Take-Over NOT WORKING

Sat, 13 Mar 2021 15:30:40 +0000

I have a 2019 Honda Ridgeline with a THAR-ONE-HON8 harness plus Linkr LT2.

Everything works great except for the take-over.

When I start the RS, step into the truck, engine is still running. As soon as I step on the foot brake pedal the truck shuts down.

The THAR-ONE-HON8 is supposed to work with the take-over but it does not.

ByPASS fw: 73.38

RS fw: 1.25

Help.

2007 Ridgeline X3 press not starting

Mon, 02 Nov 2020 08:19:49 +0000

Hey, installed my Evo - all on my 2007 Ridgeline. Programming process seemed to go fine. When I press lock 3 times the blue light blinks once, but truck doesn't start. I wire to wire installed it. The starter wire is in used in the wiring diagram not sure if I have to connect that?

Doors unlock after a minute or so

Fri, 24 Jan 2020 14:58:08 +0000

2007 Ridgeline. Using EVO-ONE for remote start and factory remote(3x lock). After a minute or so after remote starting, the doors will unlock. Everything else works as it should other than a slight overcranking. They unlock before start and lock after start.

2007 Ridgeline will not Remote Start with Encore6 alarm and Evo-All

Sat, 04 May 2019 14:06:04 +0000

When i programmed the Evo the instructions says the red light will blink 10 times, it blinked 8. The blue light continued to blink, i then turned the key to off. The truck tries to start, but only cranks. I have wired in the factory alarm arm/disarm (pain in the ass with this truck).

The issue is the immobilizer (key icon) blinks on my dashboard when trying to remote start. Ive tried to reprogram 3x, its finished all 3 times (8 red blinks, blue continues every time). It will start if a key is in the ignition, or next to it (duh).

Im using the remote start command from the Encore6 (safety start, press * 2x)

*Yellow light is on during any command, just checked. Blue light flashes with commands except remote start functioning. When doing remote start the yellow and red lights are on solid, and return on the next try.

Thank you for your help.