Questions & Answers - Recent questions tagged stand-alone

le tiguan 2018 ne demarre pas, la cle valet entourée de fils ne semble pas fonctionner

Sun, 25 Jan 2026 22:42:37 +0000

Quand on actionne le demarreur, on peut voir sur le tableau de bord qu'il ne voit pas de clé. il essaie 2 fois et barre les portes. les lumieres du vehicule flash 1 fois. J'ai 10 tours de fils autours de la cle valet.

Merci de m'aider

EVO-TRACK, can it be stand alone, no evo-one

Fri, 16 Jan 2026 20:08:59 +0000

EVO-TRACK,

can it be stand alone,

no evo-one

2020 f150 lock/unlock/lock option known issue?

Fri, 14 Nov 2025 17:26:15 +0000

Has anyone experienced this issue with the 2020+ f150 stand alone with t harness lock unlock lock?

The install is like 5 minutes and goes great. Test at the door l/u/l fires right up. The problem is as soon as you move away a few feet from door with key ....the vehicle lets you lock unlock the park lights come on and you cannot lock again until lights time out which isn't fast enough for remote start sequence. 3x lock works fine but you have the horn honk as usual. Has this happened to anyone else? Just wondering

Hello! 2012 audi Q5 EVO-ALL Stand alone Does not turn on red light and not start. Programming was correctly.

Fri, 10 Oct 2025 16:51:53 +0000

Hello! I installed evo-all on 2012 audi Q5. Programmed and dcryptor was successfully, but after installed module on the car red light never on. And remote start doesnt works.

2014 Ford F-150 XL Stand Alone Install No Power Windows/Power Locks

Thu, 25 Sep 2025 19:16:23 +0000

Hi Fortin,

I recently purchased a F-150 that was a bare bones truck meaning no power windows and no power locks. If I get the 2 Ford keys with buttons on key for lock and unlock, will it work with a evo-all and tharness 3x lock installation?

Not sure if this vehicle will still have canbus lock signals available to program the remote start or will the keyless entry buttons also work. Does the vehicle still have unlock and lock features the car came with only a regular key no buttons?

Or will i have to do the install and add a fortin RF kit?

Programming doesn't complete, new EVO-ALL on F150/2012, firmware flashed

Sat, 19 Jul 2025 03:52:12 +0000

Can't find anything in the questions/answers that is exactly like this issue but I can't seem to complete the programming on my truck.. I've double and tripple checked the wiring, can-high/low, key sense A1,A10,A20 were connected as well.
First time it seemed to sense the keys, waited the 3 seconds each and returned to the 1st factory key.. waited for 3 or 4 minutes and no status change so I tried it again. Seemed to go a little further and the system locked/unlocked the doors and the stopped again.. no 10x flash of the indicator either. reflashed the unit and tried again, this time nothing seems to progress. I can put the unit into programming mode (blue/red solid) When I touch a key to the ignition I see a quick flash of the yellow, turn to run and wait 3, 2nd key doesn't show anything.. return to the first key and nothing happens. lights won't change at all and just stuck at solid blue/red. I've tried tapping the button when the key is inserted, but that does nothing either. One really strange issue is I started the truck after (unit was still connected) and it would not shut off until I pulled the connectors off the controller.. brake pedal didn't do anything, opening the door didn't light the interior or turn on the parking lights.

Any ideas? THAR-FORD1 with EVO-ALL

2015 Ford F150 won’t go into step #4

Sat, 14 Jun 2025 14:43:26 +0000

2015 Ford 150 with keyless entry and factory hood pin.

During the programming steps, it will not flash after ignition is in RUN position. Blue light remains Solid.

I’ve verified all my connections and are good.

EvoAll s/n: 001A07649192

Firmware: 4.01

Can I use the A14 switch option for the parking light control when configuring the EVO-All?

Mon, 03 Mar 2025 18:33:49 +0000

Guide says for parking light control the A14 brown/white wire needs to be tied into the light blue wire of the second BCM connector pin 8. Didn't know if the A14 was turned on when configuring the module that would negate needing to tie into the pin 8 second connector on the BCM.

Why blue and red flashing LED after programming 1st key bypass on Evo All on 2014 Mazda CX5?

Mon, 27 Jan 2025 21:24:53 +0000

I am using guide 62951 to program the Evo-Mazt1 to an automatic push button start 2014 Mazda CX5. I have verified continuity to the door lock data and data key wires. When following the key bypass programming procedure it works fine until I get to step 6 on page 9 to learn the first key. Yellow LED lights up briefly then immediately starts flashing red and blue continuously. I have tried using the flasher to re-save the settings. Have tried taking the battery out of the key/fob. Sometimes it stays blue. Sometimes it flashes red and blue. Any help is appreciated. SN: 00A06 843321

Probleme wrap key semble pas fonctionner audi q3 2021

Thu, 26 Dec 2024 13:56:28 +0000

Wrap de key audi q3 2021.

Tout fonctionne quand la Clef est dans ignition. Et demarre une seule fois sans la clef. Par la suite sa ne fonctionne plus jusqua ce qu on mettre clef dans ignition.

reciving key signals. not cranking or starting

Tue, 24 Dec 2024 01:03:43 +0000

Im using evo all module with fort 3 T harness. ford ecosport 2019 push start

SN: 001A07 579754

Guide : 80381

I think I did wiring correctly according to the digram. when pressing 3x locks on OEM key LED lights going red yellow blue and blink hazard light 3 Tims and honk. this continues for two times. after that 3x red blinks. vehicle not starting or cranking. I can't find any solution for that on troubleshooting guid. Please help to figure out what is wrong.

subaru crosstrek and take over

Fri, 29 Nov 2024 13:22:55 +0000

Hello. I installed evo-one (3x lock) on 2018 Subaru Crosstrek. When opening the door the engine stalls... What could be the reason?

EVO-All and CHRT4 - no connection type option

Tue, 22 Oct 2024 21:43:30 +0000

Greetings,

Programming an EVO-ALL for install in a 2012 Grand Cherokee PTS, planning to use a CHRT4 T-harness for install.

When programming the unit with the FLASH-LINK, firmware 59.02 in the section for selecting 'Connection Type', it only presents 'Wire-to-wire' option...is that correct?

EVO-ALL will no longer go into Solid Blue Key programming mode after programming button is released?

Sun, 20 Oct 2024 01:22:11 +0000

After an almost successful key programming where the Decryptor completed successfully with the EVO-ALL, Unfortunately, I did not replace the R-LINK with the TB-VW first before I reconnected the EVO-ALL. When I replaced it after it did not successfully start and gave 5 Red Flashes/Beeps. So I am trying to start over at key programming step 1. When the programming button on the EVO-ALL is released on the Blue LED flash, the Blue LED just goes out instead of staying ON solid. After reconnecting the remaining connectors to the EVO-ALL and pressing start button the yellow LED comes on. It seems like the EVO-ALL is damaged if it will not go into key programming mode or perhaps the RLINK is no longer functioning, This is not a wiring problem since key programming worked the first time. I have no way forward can someone please help?

Does CHRT7 require any splicing or tapping for a 2024 Ram?

Fri, 27 Sep 2024 13:54:34 +0000

Considering buying a CHRT7 or CHRT6 for my 2024 Ramy 1500 Rebel with OEM remote start and keyless entry. I looked at the install guide, but its not quiet clear whether it requires splicing/tapping into any wires. (especially the parking lights, ignition, CAN low and High).

Thanks

FIAT 500 A5 and A6

Mon, 23 Sep 2024 13:50:04 +0000

I set A5 and A6 to OFF...Wouldn't that be the culprit?

infiniti evo-all---evo-key

Mon, 15 Jul 2024 09:06:32 +0000

Hello. Is there a diagram (better if it is standalone) for evo-all such a connection on 2015 infinity Q50, like evo-key? By RX-TX

how much parisitic drain does the EVO-START LTE add to Evo All or Evo One and does it goe into sleep mode to minimize it

Tue, 11 Jun 2024 09:40:58 +0000

2019 gmc savana 2500 standard key

2022 wrangler

Tue, 21 May 2024 10:10:04 +0000

Hello. I installed evo-all on a 2022 Wrangler. When registering, the decryptor wrote: "DCRYPTORS LIMIT HAS BEEN REACHED FOR THIS CAR...What should I do?

will an evo all operate as a stand alone oem key remote start in a 2016 fiat 500

Wed, 15 May 2024 13:07:07 +0000

2016 fiat 500 highline 2 door coupe with a 1.4L none turbo, automatic.

I wish to install the evo one as a low power stand alone remote start operated by the oem keyfob .

will this work?

2015 outlander euro

Fri, 03 May 2024 10:58:39 +0000

Hello. I also tried the master reset as you told me. I tried another device, which I tried on Ford before (001A07391859), but "take over" is not possible... it says on the monitor that the immobilizer system needs service.

2015 outlander take over

Wed, 01 May 2024 11:50:09 +0000

Hello. I installed Evo-Al for 2015 Outlander (PTS) Standalone. After remote start-up, we go in the car, I click 2 times on the Start-Stop button and he writes that he does not see the immobilizer (like this), and the engine turns off when pressing the brake.

no blue lights when programming oem key

Mon, 29 Jan 2024 12:27:30 +0000

programmed and wired correct, no blue lights comes on during final step of turning ignition on with oem key

2008 dodge ram 2500 diesel

Evo-all stand alone

Wed, 17 Jan 2024 08:59:23 +0000

Can I use viper remotes on the evo-all stand alone with the xl202 and if possible is there instructions for this

Thank you

Does the lock and unlock wires go into the listed empty slots on a 2019 Nissan Armada using the Evo-Nist1?

Sat, 09 Dec 2023 18:58:12 +0000

The guide says that the lock and unlock wires go into an empty slot.

2022 PRADO

Thu, 30 Nov 2023 06:55:00 +0000

For the 2022 Prado I indicated the 2018 LC150(euro). I connected CAN in the middle BCM connector. Blue is high, white is low. + and - I connected to the OBD. The parking lights turned on themselves...Even the position of the auto light lever did not interfere. The steering wheel did not close at all and did not have SLP either.

2022 Nissan Rogue remote start push start

Wed, 22 Nov 2023 15:18:56 +0000

I am installing a remote start to a 2022 Nissan Rogue, the installation guide says that 1 key will be sacrificed in the installation and the key in a box, I don't understand what that means, nor about sacrificing the key, nor about the key in the box, I need if someone could help me with that, thank you very much

2006 chevrolet impala using evo-all stand alone install - no lock/unlock and accessory connection

Fri, 20 Oct 2023 21:04:28 +0000

Hello all,

good day. Just wanna ask if i do the evo-all stand alone install with rf642 on this 2006 chevy impala, will the lock and unlock and accessory work through the vdata cable? Without physical connection?

i experienced this with a 2007 nissan xtrail, it has a data connection but lock/unlock doesnt work. I had to physically find and connect them. (Using. Evo-one)

thanks in advance.

LC200 EURO

Fri, 07 Jul 2023 07:39:24 +0000

I install fortin evo-all on LC200 (EURO) (standalone--408261). I release the programming button to blue. I connect the rest of the connectors. I turn on the ignition, the blue goes out and after a while the red starts flashing. Wire colors don't match either.

2004 QX56

Tue, 04 Jul 2023 17:44:09 +0000

Will 3x-lock remote start work on a 2004 infiniti QX56? (evo-one)

2022 Skoda

Sun, 11 Jun 2023 08:06:14 +0000

I wanted to install on 2022 Skoda Octavia (PTS) evo-all... ...470681 I reflashed it 4 times, but didn't program it (CAN doesn't see it). Is there any variation?

Silverado 2022 push to start

Mon, 15 May 2023 19:01:08 +0000

I have silverado 2022 limited edition push to start.. In fortin page they said to buy gmt6 i bought it but the bcm connectors are different than the t harness connector.. Any suggestions?

Audi A6 standalone remote start

Mon, 20 Feb 2023 05:26:07 +0000

GUIDE # 79791 How does this manual provide remote start?.. With an OEM remote control or an aftermarket one? (Not specified 38.2) I want a standalone (as a last resort, an impulse trigger or an aftermarket remote start).

2017 CX-5 Doesn't Get Yellow Light When Ignition Turned On

Sat, 18 Feb 2023 17:03:47 +0000

Installing Evo-All & THAR-MAZ1 on 2017 Mazda CX-5.

Followed the guide (62391/66311... different guides if going through troubleshooter vs Flash Link guide) for firmware & options (tried firmware 85.12 & 85.11)

THAR-MAZ1 only has Start/Stop 2nd connector (24 pin) & no 32 pin connector. So I am using the recommended wiring connections minus Data Key & Door Lock Data (A10 & A20)

When programming I cannot get the module to recognize a key (blue LED, no yellow LED illuminated when ignition is turned on).

Is the Data Key (A10) required? It is not in the THAR-MAZ1 harness nor is it populated in the OEM female connector.

One of the keys to this vehicle was lost previously & only have 1. Is it possible to program with only one key? (the Flash Link Manager notes that 2 keys are required. I don't quite understand why)

2014 Jetta The doors don't open.

Sun, 25 Dec 2022 09:50:57 +0000

I installed Evo-All on a 2014 Jetta (standalone).

001A07363467. By pressing 3 times, the engine starts, but the factory remote control does not close the door or open it. It extinguishes by extinguishing, but the pauses between presses should not be less than 2 seconds. The blue LED flashes erratically between presses.

no tach output, Fresh evo one install (no rf kit standalone)

Wed, 21 Dec 2022 10:09:42 +0000

2015 Lexus RX 350, finished evo all per guide. getting no tach output on diagnostic lights. (evo all 2022 hardware, firmware updated)

2016 Mazda CX5 wont start after Evo-ALL stand alone 1 key remote start

Thu, 15 Dec 2022 15:47:38 +0000

I tried with 2 program procedure a couple times without success, so I did the 1 key stand alone remote start procedure. All of the LED indicators worked correctly and the Dcryptor procedure was successful. I installed the unit back into the car and I am getting a sequence of light flashing both with the module and running lights. I double and triple checked to make sure all connections were solid and correct. No external RF is being used, so most of the those connections are left unconnected.

4A-4B empty pin to ground is connected (hood pin wire was left unattached, but was tried both connected to a ground and unconnected with no success)

Door lock and Data key connections correct and solid

D connector with parking lights correct

The main reason I did not do the 2 key program procedure was becuase the securty light was not illuminated after pressing the start button twice for the first key programming.

I have videos of the remote start process and the lights blinking for both the outside of the car and the module inside the car. I will attach a link for youtube videos.

Module video

https://youtube.com/shorts/5ySAvsqS_qs?feature=share

outside vehicle video

https://youtube.com/shorts/-u8GTiVlDW0?feature=share

Thanks a bunch

2007 Chevy Silverado

Sun, 11 Dec 2022 19:43:25 +0000

Hi there. Derek I need you help.

Vin Number: https://drive.google.com/file/d/12jf0GUEf2NYWnjO6kO761FTO_eqRumyY/view?usp=sharing

S/N: https://drive.google.com/file/d/1CrUHW5cP2gR-a7bjHh2uQ8ecnvFx-mxD/view?usp=sharing

Error: https://drive.google.com/file/d/12j-8NUcFIbYOHyYIBQNFwrSWbxaVwIOt/view?usp=sharing

Now the problem is with the car not with the can bus. Could you reset the Dcryptor limit please? Thanks you so much.

Renault Kadjar 2020 Evo All standalone

Tue, 06 Dec 2022 07:26:19 +0000

I have a Renault Kadjar 2020 with push button, I want to install Evo All as a standalone solution for remote starting the car, Renault Kadjar and Nissan Rogue Sport share their major components and are similar in a lot of aspects, they have the same BCM and same wiring sockets, I have followed the guide for Nissan Rogue sport and there are differences in the following : 1- OBD ignition ( pin 8 is empty ) 2- 24 Pin Black Socket ( Pin 19 is empty while Blue wire is on Pin 20 ) 3- 40 Pin black Socket ( Pin 9 is empty ) 4- Most of the Wiring Colors are different than the guide Please keep in mind that i have already used the same solution on a Nissan Qashqai ( similar to rogue sport ) but with a T harness and it worked My main concern now is to have a correct wiring guide for Renault Kadjar and i am confident that it will work

2022 Skoda Superb

Mon, 14 Nov 2022 11:52:20 +0000

For 2018 Skoda (key) you recommended firmware 75.41 to me and it came up. Now I want to set evo-all (standalone) to start-stop (Skoda 2022 Superb). If 61.11 firmware won't work, then which firmware should I choose?

Rf411 not responding

Sat, 29 Oct 2022 18:36:28 +0000

I installed an evo one and rf411 in a honda civic 2012 and it worked perfectly while i was installing it. However, while routing the antenna, I removed the cable from the antenna side to make the routing easier and re attached it after. Now the factory remote 3x start works but the rf kit remote is not accepted by the antenna. Also there is no lights coming on the antenna. I tried plugging it in to see if the light comes on, reprogrammed the evo one, tried the antenna button, tried putting the antenna in programming mode but the led doesnt come on at all.

2013 F-150 not starting after EVO-All Installation

Thu, 27 Oct 2022 19:57:53 +0000

After the installation, I programmed and everything went perfectly. I Had it set to 3 locks to start. Now it turns on the ignition and tries to start, but there is nothing. It's as if we are trying to start with an unprogrammed key. I went back over all my connections and everything seems fine. I also found a little note on your site about disabling option D2. I've done this but still have the same condition.

Any help on this matter would be most appreciated.

Thanks

2019 Mazda 6 not starting after successful programming with evo all

Mon, 10 Oct 2022 23:44:27 +0000

Hey everyone,

I'm trying to install an EVO-ALL in standalone mode on a 2019 Mazda 6 with a T-Harness.

I initially successfully programmed the module with the two keys, and then successfully completed the CAN procedure as well. Unfortunately I could not get it to start, the module would have the red and orange lights on but would make no effort to crank the car.

I tried starting over by resetting the module, and now whenever I repeat the programming process I see a flashing red light, which supposedly means that the keys are already linked to the unit. Doing the CAN procedure now also results in all 3 lights cycling instead of the single blue light going off. Simply plugging the module in results in all 3 lights flashing.

I'm not entirely sure where to go from here. I'd like to start over but I'm not sure how to do that.

Why no remote start for 2008 A6

Sat, 24 Sep 2022 15:16:51 +0000

Just curious As to why remote start function is not a available for the 2008 Audi A6. I really do not want to rely on compustar or some other DEI product.

No Power to EvoAll 2008 Ford Escalp with Tharness

Wed, 14 Sep 2022 13:35:09 +0000

Hello, I have an Evo-All with a FordThar1 installed in a 2008 Ford escape for stand alone remote start. The vehicle will start and run with the Key normally, but iim not getting any power to the Evo-All. Ive verified this with a DVOM and use a second EvoAll module. Is my T Harness faulty? or is there something else ive missed?

When will 2022 Chevy Silverado 2500 push To Start be supported

Sun, 07 Aug 2022 12:34:57 +0000

When will 2022 Chevy Silverado 2500 push To Start be supported

2022 citroen C5 aircross

Tue, 05 Jul 2022 09:26:35 +0000

What firmware is suitable for 2022 citroen c5 aircross?

Add ASCL6 with RFK942

Tue, 08 Mar 2022 13:51:05 +0000

I've installed the EVO ALL with T-Harness (EVO NIST4) and the RFK942 RF kit to my 2016 Infiniti Q50 (3.0T). All works well.

I am considering adding the Car Link ASCL6 system to my car. My question is can I use the RFK942 together with the Car Link or will I have to choose between one or the other If I can use both, will I need something added to the existing T-Harness (EVO NIST4) in order to connect them both (such as RFA2A)?

Thank you in advance for your help.

Evo all will not arm after cycling ignition several times

Thu, 03 Mar 2022 22:21:02 +0000

2005 accord w/o factory alarm. Evo all programed fine. Tested with car parked, armed alarm and open doors the alarm goes off. Jump in the car cycled on ignition , retest and no alarm. Evo all blinks blue when i arm/disarm. Using pdf 16221 wiring diagram. I have to unplug all wiring harness then replug everything back in order for the alarm to work. Checked for loose connections and came up empty. Please help

does Fortin have a phone app for the Usa

Mon, 07 Feb 2022 13:27:53 +0000

Does Fortin have a phone app.What additional parts do i need for Evo-One.Does it cover the USA. Is there a yearly supscription?