Questions & Answers - Recent questions tagged stand

P0513 code 2005 Chrysler 300c Evo All Stand Alone Connection F Everything Working.

Tue, 17 Nov 2020 22:26:03 +0000

It's like a false/positive situation. I had someone overpress my rf remote and oem key was starting car on one lock. blah blah blah

Reprogrammed both sets of keys (2 oem's and 2 RF RM411 long range one way remotes). Everything works fine again, but if I use the one button RF RM411 I get the code thrown and a little red security light stays on for a couple of seconds once my key is in on position in ignition.

Now if I just use the OEM key, I don't get the red light. Also there is no engine light with code. The only reason I know it's there is I had the car seafoamed (should have done through break booster after MAF, used intake manifold. Had engine lights galore and ended up changing all 16 spark plugs myself (the good ones) and clearing misfire and crankshaft sensor codes.

Anyways, all is working great now, except this code I can't seem to clear in any way. Is this an issue with my car or Chrysler products?

Usually when you have this code, the car will start but quit soon after.

Just let me know and I will just leave it alone and not worry about it.

2005 Chrysler 300c Evo All install using T Harness Chrt5 no remote start after install

Tue, 27 Oct 2020 17:42:15 +0000

My ignition wire setup as follows. 1. Purple/Orange

2. Purple/Brown

3. Pink/White (Now says Pink)

4. Pink/Green (Now says Pink)

5. LTBlue/Red

Module and RF kit (RM411) is programed and works fine. When I remote start I get a blue light for each lock press on OEM remote.

Then it unlocks and locks and get RED and YELLOW lights with bottom blue flashing I hear the chime and it tries to engage without starting.

I know I can't be the first 300c first gen owner that has had this problem, any help would be greatly appreciated. I can share the video of the starting sequence (email or onedrive link). Thanks

https://1drv.ms/u/s!AglxCUFWL4h7k_RVT52kACjno0_xIA (pic of Ignition plug)

Right click links and choose open in new window to stay in forum

Evo-all standalone module stuck on red light resets will not work

Wed, 19 Feb 2020 10:51:04 +0000

Remote start evo-all standalone install for 2017 Nissan Armada

NISSAN MURANO 2016 EVO ALL STAND ALONE NOT WORK

Sat, 03 Nov 2018 17:43:16 +0000

Evo ALL stand alone not work to Murano 2017.

Connection all is correct ( diagram 66611) 3xlock works ( blue led flashing),enigine not crank ,dash on and message AWD error,check engie light on.

Decryptor is fine.

If engine start Push to start work fine ,but engine off dashboard still on and need disconet evo all to dashobard off.

I try three difrent modules evo all and problem is still

whats wrong ??

What is wire A13(Yellow/Blk) - External Input for?

Sun, 01 Jan 2017 11:12:19 +0000

Is the A13 wire required in stand alone evo all