Questions & Answers - Recent questions tagged starts

Updated and no longer beeps when you press the HORN

Tue, 07 Jan 2025 11:12:23 +0000

Updated and no longer beeps when you press the HORN

In addition, the operating mode was set to 3 minutes but the actual runtime was only 1.55 minutes and a new key code was updated to solve the problem but more than once until the attempts were completed until this update issue appeared

Note that last year the device was working properly, please solve the problem for me from the bottom of the code

Serial Number:002B04045909

Evo-One

Note that previously before the update, the alarm was working properly after pressing it a second time and the engine works remotely, but now all settings are good, but the alarm does not work My car type Honda Accord 2014

Default settings were set to no avail

I hope who has the ability to help me reset the device to factory settings

Thank you very much

chevy colorado 2006 doesnt start

Mon, 30 Jan 2023 21:08:49 +0000

I have programed a evo all )1a07248861) for colorado 2006 standard key, using it with a remote start crimestopper rsg4, everithing is fine with de programation, the door lock and unlock is working fine.

but the problem is when i want to start it, the lighs turn on , the inition , accesory, etc. but the car never run with de starter and it doesnt starte, the evo all stay whith de lihgs yellow and red solid and the lights never turn off.

i tried programing diferents evo all and the same thing happened with them.

2006 nissan xterra evo all with prostart ct3371- starts but doesnt stop until you press the remote starter again

Sun, 13 Nov 2022 22:04:10 +0000

so i installed an evo all with a prostart remote starter ct3371from canadian tire. lock and unlock works and it also starts and stops with the remote. but we noticed that when we start it, it doesnt stop running after 15-30mins. it will only stop running after we press the remote start on the remote fob again.

i installed all the evo all and the pro start using guide 78161 which is for 2006 nissan xterra.

i installed all the solid lines from the starter. and the evo all. i also installed the broken line connections lock and unlock from the starter to the car and the broken line driver door pin connection from the evo all to the car. i also connection the GWR from starter to evo all.

only thing i skipped is the security LED connection which require cutting a wire thats why i skipped it.

am i missing something? do i have to connect all the broken line connection from starter to evo all?

thanks in advance for the help. i really appreciate you guys responding so quickly to questions. you guys are awesome. thanks again.

2020 Toyota 86 (PTS) starts for 2 seconds then turns off

Sat, 26 Feb 2022 10:12:56 +0000

I have an automatic 2020 Toyota 86 (PTS) with an EVO-ONE installed. From my knowledge, we have all the wires tapped properly. We ran into a few issues with the immobilizer wire but I believe we got that part sorted out.

To confirm with the immobilizer wire, we cut the yellow immobilizer wire in half, tapped the light blue black and yellow red to the immobilizer wire that's connected to the ECU, and tapped the yellow green to the immobilizer wire that's connected to the other side of the car. Is this correct or should it be flipped? We're not able to aquire the immobilizer data for DCryptor but I think it's because it's not listed as supported on fortin's website, even though we go through the guide and finish with the Yellow and Red lights alternating on the EVO-ONE before attempting to use DCryptor. (Leaves us with a 'No data found' error).

Finally, we installed the antenna for the RFK411 remote and programmed it. When starting the car, it starts for about 2 seconds then turns off. Does anybody know what could be causing this issue?

evo all starts once and then dont starts

Wed, 20 Jan 2021 10:11:05 +0000

help please, my car mazda 6 2014 push to start , i done all correct , 3x lock the car starts first time , after that i try to start 2nd time evo all dont start the car what is wrong? help please

2013 Toyota Tundra starts for a few seconds then shuts off

Sat, 11 Apr 2020 21:18:55 +0000

I have tried everything. I am pretty sure it's programmed correctly. It starts then shuts down seconds later. I am all out of ideas and ready to give up. Service number 002BO7 339682

car starts then shuts down

Wed, 01 Jan 2020 18:01:05 +0000

I am installing an Evo one in a 2013 Subaru Outback with automatic transmission. The module was flashed with the correct software and programmed correctly and when I remote start it, it starts then shuts down. It tries a second time and then park lights flash 4 times The SN of my module is 002B04 051414

Remote start but engine shuts off after 5 seconds

Mon, 04 Dec 2017 16:04:35 +0000

The car starts but shuts down after a few seconds

security light is not on

need help with programming?