Questions & Answers - Recent questions tagged subaru-wrx

2016 WRX PTS start up and shutdown right away.

Sun, 28 Dec 2025 03:51:05 +0000

2016 Subaru WRX PTS start up and shutdown right away.

Tach Supersivion 20.6

Do you make a system for a 2022 Subaru wrx, key start, manual transmission?

Thu, 04 Dec 2025 03:27:09 +0000

On your website, I put in my car information 2022 Subaru wrx key start manual transmission, it shows systems that are compatible but do you guys make a harness that is compatible? I don’t see one and the instructions for it I believe are only for an automatic. I also went to program the evo one and the only option for the 2022 wrx is for a push button start, no key start. I purchased the evo one 942.

Subaru wrx 2023 cle reguliere

Tue, 23 Sep 2025 18:32:49 +0000

Bonjour a quand la mise a jour pour le contournement de la cle par le module ...

je sait que le push est disponible donc j'imagine bientot...

Mon client a seulement une cle.......

Merci Joel

EVO-ALL as ALARM only on keyless Subaru WRX 2020 Manual

Thu, 04 Sep 2025 00:15:55 +0000

Hello!

I really like the EVO-ALL module and would like to use it as alarm only on my 2020 WRX. I am NOT interested in remote starting the vehicle.

Looking at the manual (https://cdn02.fortin.ca/download/103541/EVO-ALL_IG_REG_BI_SUB_WRX_2021_PTS_A_103541.pdf), I am trying to determine whether I need to connect anything apart of power and CANBUS to get the ALARM working using OEM keyless entry fobs.

The manual mentions REMOTE STARTER block, which seems to be separate to EVO-ALL, I assume I won't need it.

There is NO factory alarm in the car. Just central locking and keyless entry and push-button start.

Please advise.

Regards,

Eugene.

Exit ready mode

Wed, 18 Jun 2025 17:14:20 +0000

2021 Subaru WRX manual transmission. If I accidentally put it in ready mode while parking is there a way to cancel ready mode and continue driving without the engine shutting off?

2022 Subaru WRX, Manual Transmission, Evo-One, THAR-SUB4, RFK3641, Ready-mode not activating

Thu, 07 Dec 2023 12:28:13 +0000

Car = 2022 Subaru WRX, Manual Transmission, Push-to-start

I have programmed, decrypted, and installed an EVO-One using the THAR-SUB4 Harness and an RFK3641 rf kit. When I try to enable the ready mode, the car is not remote starting. I have been following the procedure to activate:

Car is running, put in neutral, press foot brake, pull hand brake, release foot brake, here is where it gets weird. According to the instructions I should now press and hold the start button for 3 seconds, but before I get a chance to do that the car flashes the lights 3 times. When I press and hold the start button for 3 seconds nothing happens. I leave the car running, get out, the car automatically shuts off and locks the doors. When I go to remote start it, the lights flash 3 times and nothing happens.

I have tried doing this same thing with and without holding the start button for 3 seconds before exiting. I have also tried pushing the start button on the car before exiting (similar to "removing" the key), but the car immediately shuts off.

Looking for some assistance, thanks!

THAR-ONE-SUB2 & EVO ONE on 2020 Subaru WRX PTS

Sun, 14 Mar 2021 00:31:28 +0000

I have installed the THAR-ONE-SUB2 in my US WRX per the instruction guide, page page 7/11 T-Harness - Automatic & Manual Transmission
https://cdn02.fortin.ca/download/98951/evo-one_ig_rto_bi_sub2_wrx_2019_pts_b_98951.pdf

ASK:
1.) Why is the car not starting with the Yellow/Red and Yellow/Green separeted per the installation guide
2.) Does my US WRX have to follow the Canadian Vehicle steps, if yes why and if no what is the difference

Installation was simple as mainly 2 connectors and areplug N play. I master reset my Evo One, flashed the 2020 WRX firmware and follow the programming steps on page 8/11. When I get to step 5 to start the car, the car starts and shuts off immidiately, eventually not even turning the starter. The lights on the Evo One stay solid for Red and Blue and programming does not complete to follow up on the Dcryptor part. After a little troubleshooting I found that I can get the car to start if I reconnect the Yellow/Red and Yellow/Green wires I cut eariler making the car at least drivable again.

2018 Subaru WRX PTS Manual Transmission

Tue, 15 Sep 2020 10:25:05 +0000

Hello,

I'm looking for a T-Harness installation for a 2018 Subaru WRX PTS with manual transmission. Are you guys gonna have anything for this anytime soon??

Drone Mobile Issue

Fri, 04 Nov 2016 16:06:13 +0000

I have a MY15 Subaru WRX Limited 6 speed and i had the 3 key start working for the car. I also have the drone mobile that i added to the system.

From the research I ddi, i need to flash the firmware to 0.5 for the starter optoins.

Now after flashing, its seems i cannot start my manual car with tthe 3 key clicks, turbo timer, or control the functions. It wont lock , open trunk remote start...

i looiked at the hardware and after flashing, the options for the remote start disapeared, what should i do?

Fortin Evo One red and yellow flashing

Wed, 02 Nov 2016 11:29:45 +0000

I have a evo one and using a t-harness for my 2015 Subaru WRX Limited Manual transmission. I go the wires all hooked and Im not sure if I was able to get the initial programing done correctly. I was doing this at work and needed to get home despite being unsure of it being programed properly, started my car and drove home. I tried doing the initial setup with the red and blue light being solid. Now the module has a solid blue while blinking red and yellow at the same time. Is this a concern ? What should I do if it's not correctly setup.

2014 Subaru WRX supported?

Wed, 18 Dec 2013 03:22:36 +0000

Is the 2014 Subaru WRX supported by the Evo-All? I saw that the 2013 is, and considering there aren't any changes between models, I was wondering if I could use this for an install. Thanks