Questions & Answers - Recent questions tagged thar-gm2

EVO ALL smartstart doors trunk unlock no crank

Thu, 29 Jan 2015 13:18:38 +0000

When I press start on the the app, sgnal gets to the evo red led flashes dashboard ligths up but does not start.

sn: 001a06289845

firmware: 70.16

Evo all thar GM2 Programming problem Dcryptor didt not complete

Fri, 26 Dec 2014 00:50:17 +0000

2011 impala EVO-ALL THARGM2

Hook up serial cable press button blue led on red on yellow on blue with red on at the same time then blue again.

after connecting other connectors blue led is off press button blue led not ligting up

Ign in on position nothing lighting up.

Tried resetting evo a few times and starting from point 1 , same results.

Please help

Hank

what is the difference between the THAR Gm2 and Gm4 ?

Sun, 23 Nov 2014 15:56:47 +0000

and why does the THAR Gm 2 require a TBGM2?

SIERRA 2011 EVO-ALL THAR-GM2

Wed, 15 Oct 2014 16:06:02 +0000

Hi there, the car is not starting untill i put the key closer to the key celinder

using stand alone EVO-ALL THAR-GM2 3X lock

in the user manual its mentioned to connect only 20 pin (White),5 pin (White). But what about 6 PIN (RED)? No need to be connected? what im doing wrong ? also try using the TB-GM2 but not workig. but its not mandator

Please advise

Brake status is not sent?

Sun, 18 May 2014 17:30:05 +0000

I installed CrimeStopper DS-1 with EVo-All for my Camaro. Everything seems to be fine. I can remotely start the car. However, while the car is running, I turn the ignition key to the On position. Then I hit the brake pedal, the remote start doesn't get reset. Also, I cannot configure the remote starter because when in configuration mode, the LED doesn't flash when I press the brake pedal. Thanks

2012 GMC Sierra, Installed Worked Perfect, Quit Working

Sat, 04 Jan 2014 22:07:19 +0000

I installed the Evo-All with the THAR-GM2 harness. Flashed unit, Installed and programmed. Everything worked perfect and I tested several times. Later on I remote started the vehicle, moved and vehicle would not turn off (by key or factory remote) waited for unit to time out. Vehicle turned off and remote start no longer functions. Tried to re-program and nothing (no lights at all), Re-flashed unit and I was able to get a solid blue light when re-connected to vehicle, I continued with the procedure and the blue light would not begin flashing, but go out. Turn the key off and get a solid blue light. Tried to re-flash unit again and now I don't get any lights at all when connected to vehicle.

service number 001A06 285421