Questions & Answers - Recent questions tagged to

Please reset Service # 001A06493252 R to 0

Sun, 16 Mar 2025 05:25:05 +0000

Please reset Service # 001A06493252 R to 0

flashlink wont connect to evo all s# 001A06 682920

Tue, 11 Feb 2025 10:31:45 +0000

I think I reached the flash limit as the lights come on the evo all with the flash link but it will not detect oit. In bypass its a solid red light and in remote start its all the flashing at once. Any way to fix this? I tried the reaet procedure, but didnt work. Its for a 2013 silverado.

History cannot be cleared

Sat, 23 Mar 2024 13:56:00 +0000

unable to clear history

Remote starts then shuts off in 20 seconds

Tue, 05 Apr 2022 10:27:02 +0000

Car will remote start in stand alone. Runs for 20 seconds then shuts off. Does not try to restart. Will run with key all the time. Remote start diirectly after and will run for 20 minutes. Firmwar is up to date and all connection are done wire to wire exept for data link. All lights on Evo All are on like described.

Key Fob and Cluster

Wed, 01 Dec 2021 00:52:24 +0000

2007 A4. The key fob and instrument cluster was not original. So the immo cause the vehicle not start (cranks only). Can anyone recommend which one to purchase to defeat or bypass the immobilizer to get the vehicle to start?

09 altima evo-all w/thar-nis1 tharness. Wanted to add siren and shock sensor need wiring diag.

Sun, 21 Feb 2021 20:54:05 +0000

Evo,all w/thar-nis1 t harness, oem remote, standalone. Green wires are for lock n unlock. Where is siren wire ?

Push button start install 2020 Ford Ranger

Sat, 20 Feb 2021 09:24:26 +0000

I am installing a Easyguard PKE Push to Start system on a 2020 Ford Ranger with standard key. The easyguard system requires a wire connection for the chip immobilizer. Where do I make the connections on the Evo All to communicate the chip immobilizer?

No remote start after install, no parking lights, brake lights light up.

Sat, 02 Jan 2021 14:42:33 +0000

Evo-ALL. 2012 Nissan Maxima

I have all wires connected. Do i need to connect any of the red plugs? No other options installed. I get no parking lights or car does not start when remote is pressed 3x. The horn beeps and the brake lights light up. Car will start when im inside and press brakes but no remote start.

do i need a new t harness upgrading from a evo all to evo one 2016 chevy silverado

Mon, 20 Jul 2020 18:20:13 +0000

cant add a rf642 to the evo all manufacturing date 12/14

2018 Jeep Patriot Push to start auto remote start wont shut off passive error

Mon, 16 Mar 2020 04:21:04 +0000

I installed an all evo all in a 2018 jeep patriot push to start auto trans. Evo sn# 001a07 068469. Installed using sugested settings and current firmware that shows up in the desktop software. Vehicle starts fine with oem 3 lock but will not shut off with the oem 3 lock or after it should time out. Foot brake also does not seem to have any effect. Tried a reboot to factory and relearn security. Also occasionally getting a "service passive entry" on the dash.

2017 Highlander It Locks/Unlocks but DIDNT remotely start from Mobile.

Sun, 26 Jan 2020 08:48:22 +0000

2017 Highlander Push to start EVO All standalone with Tharness & Evo start2 It Locks/Unlocks but DIDNT remotely start from Mobile.

I had evoall standalone with Tharness installed on the 2017 Toyota Highlander push to start working perfectly fine

Purchased a evo start2 with flash Link Updator 4

Removed the evo all module and update the firmare to latest

Save receommended options and save the options

Checked the Option C1,D1 H & H2 are on on the module

Try to decrypt thru decryptor, didnt succed

Installed EVostart 2 Antenna in the car windshield

NOTE: the antenna cable shown in installation guide is bit different from shown, have more connector and loose 4 cables red black yellow and green

Using Connection1 from evostart2 guide for EVO ALl standalone Installation

StepA:Connect 6 pin Antenna conector to Antenna

Step B: Connect 4 pin female blue connector to 4 pin male black connector from T harness

STep C: Connect Yellow wire from Antenna cable to Yellow wire going on A1 on 20pin white connector of T harness

Program EVO All with EVO start2 and got a green light. (programming successful)

Installed app on mobile and try to start,

When trying to start from MObile, the evostart2 gets a signal, shows blue light in atenna , but do nothing

I tried with OEM key fob for lock x3, it does nothing

Factory Reset the module, flash the module using flash Link Updator 4

Turn on c1 d1 and d6 h2

Program the module again and works with oem remote

Program the evo start2

Able to lock and Unlock, but not able to start from mobile

Troubleshooting:

I removed the yellow wire sttached to tharness

DONT KNOW WHAT HAPPENS WRONG

ALso checked grounding dark blue wire from 20 pin T harness to check if get red, NO D1 is enabled

please help

no option h2 on 2011 kia sportage evo one

Wed, 22 Jan 2020 17:07:44 +0000

programming evo-one for 2011 kia sportage,push start ,trying to add fortin rf kit fmh series,asks to select option h2 on program by-pass option,but its not there in the programming prompts for the evo -one? I have an evo all here and it will show the h2 option,but will i need a remote starter kit as well as the rf kit and evo all ? or will it stand alone(evo-all + rf kit?)

Do you need extra wiring for a 2017 rav4 hybrid

Wed, 25 Sep 2019 22:03:22 +0000

Is there extra wiring required for push to start hybrid2017 Rav4? If yes, is it included with theT- harness. thank you

installation d'un siege chaufant

Fri, 20 Sep 2019 09:43:36 +0000

bonjour je veut savoir comment faire pour installer le siege chaffant sur un tucson 2019 push to start coté gauche doit on mettre une diode sur le jaune /noir qui sort du evo-one MERCI! FREDERIC GIRARD

DUAL STAGE SHOCK SENSOR CONNECTION TO EVO-ONE

Mon, 25 Feb 2019 10:21:14 +0000

Hi,

I want to add dual stage shock sensor to my evo-one. Is that plug and play application. Is this complete security system which can be added to evo-one.

Please let me know.

Evo-start2 application on new mobile to start vehicle (code generation)

Fri, 01 Feb 2019 18:41:23 +0000

Hi,

I have installed evo-start2 app on my cell phone and is working fine. Just want to know how to generate code to install on my wife's mobile. It seems i can't find code generation on app. Please let me know.

how to Add RF kit to EVO-All are already activated or need to re-flash and

Thu, 24 Jan 2019 15:33:40 +0000

I have EVO-ALL working in my Dodge caravan 2016. Now i bought Fortin RF kit RF-641W do i need to reflash my module to add RF kit or its already activated?

After install, will I still be able to use my OBD11 port like normal?

Wed, 09 Jan 2019 17:26:14 +0000

At the end of this month I'll be getting my Evo-All installed and I cannot wait! But quick question, since the T-Harness connects to the back of my OBD11 Port, after install can I still use the port to tune my Mustang? I have been data-logging with a company to get my custom tune just right, and I want to make sure I'll still be able to use the port to upload the file to my car?

Thanks so much in advance!!

International shipping

Wed, 06 Sep 2017 02:47:45 +0000

Do you provide international shipping for consumers? I'm in Saudi Arabia and there are no distributers in the country. If not, will you cancel sales taxes if I used a shipping agent that would receive products in the U.S. and send them to me?

Moreover, How can I add T-harness to the cart? there is no button for it.

I purchase and started installing a Honda SL3 Bypass module on my 2013 Honda civic. Can that module work??

Sun, 16 Apr 2017 23:49:47 +0000

The alarm used was Autopage RS730. We connected the alarm, found the starter wire and connected to output. Whenever key is press 2 times, the ignition comes on, the car engine turns over but wont start. The key light blinks 4 times.

The module was not programmed as yet thou. There are 4 connection that ought to be connected from the bypass module to the Key immobilser section. Data, Lamp in, Lamp out and Synro

I would like a diagram displaying where these connections must go to or a diagram displaying where the data, lamp in and out wires are on the car Key Immobilser harness

What is the correct way to connect wires?

Tue, 05 Jul 2016 14:46:41 +0000

T-Taps, Butt connectors 2 pounds of solder I've seen and heard it all...most of the time resulting in a headache and lost time. So i thought i would break it down and show the 5 easy steps to make a good quality and secure connection in a vehicle.

The 5 Steps are as follows:

1- Strip back the inulation of the wire you wish to connect to.

2- Seperate the braid to create an opening in the wire.

3- Insert the wire that is to be connected into the opening.

4- Close the wire.

5- Finally twist the wire around securing them togehter and finish it off with some electrical tape.

Guide 3056 connection

Tue, 01 Mar 2016 13:21:32 +0000

In guide number 3056 (2014 Kia Sportage push to start) it shows grey and grey/blk from Evo-all as can2 high and low. It shows these wires getting connected to can1 high and low at the back of the fuse panel. Is this the correct wiring connection and just a typo on the diagram? Or do the can2 high/low (grey/blk) go to the obd2 connector wiring? I have a picture of the exact issue in question but the web based form doesn't allow attachments.