/en/qa/tag/toy6 Powered by Question2Answer /en/qa/89666/evo-one-programming-for-push-to-start-but-car-does-not-start <p> I just completed the programming for my 2015 rav4 push to start (Automatic transmission) and car does not start after 3x lock.</p> <p> Is there anything i am missing. I used T-harness Toy6 which looks fairly simple to install.</p> <p> Wiring diagram shows optional wire from push connection to start button which was not clear to add.</p> <p> <a rel="nofollow" href="https://cdn02.fortin.ca/download/70381/evo-one_ig_thr_bi_toy6-corolla-rav4_2014_pts_a_70381.pdf">https://cdn02.fortin.ca/download/70381/evo-one_ig_thr_bi_toy6-corolla-rav4_2014_pts_a_70381.pdf</a></p> Toyota /en/qa/89666/evo-one-programming-for-push-to-start-but-car-does-not-start Sun, 15 Sep 2019 22:01:01 +0000 /en/qa/82827/do-i-need-to-connect-the-main-connector I have an EVO-ONE with TOY6 harness for a 2018 Highlander Hybrid PTS. &nbsp;I&#039;m using the install guide #70741, which support said was the correct one. &nbsp;In this guide it says to tape over the main connector to prevent shorting to ground, but further down the guide it says to plug in the main connector to program key pass. &nbsp;Do I need to connect the main connector to pwr/gnd or does the evo-one get power from the t-harness? &nbsp;Which connector do I need to plug in to complete the key pass programming? &nbsp;Thanks. Toyota /en/qa/82827/do-i-need-to-connect-the-main-connector Tue, 27 Mar 2018 10:25:33 +0000