Questions & Answers - Recent questions tagged toyota-tundra

No flashing lights during remote start

Thu, 20 Mar 2025 19:36:37 +0000

23 tundra Everything work except i get no flashing lights to confirm remote start works. Remote start works open close works trunk opens i can turn on the miror heaters and defrosters. And ascl7 telementry works and tells me remote start is runing door status ect. When i lock the car using the remote start the horn beeps which i love cuz i cant hear the factory remotes quiet beep throug the closed window.

Any ways reflashed the module 3 times once in pro mode and twice in wizard mode. Is there a setting needing to changed or a wire that i need to check??

23 tundra wire cut question

Mon, 12 Aug 2024 23:48:48 +0000

I have 23 tundra. do i realy have to cut the pink and splice the purple wires on 64 pin connector?? Is it so i can use oem remote while remote start is active and if thats the case can i just use the fortin add on remotes so i dont have to cut wires i dont mind having to have 2 key fobs if it means not having to cut factory wires ive had 2 key fobs since my first remote start years ago so it doesnt bother me.

Thanks

Evo ONE with CARLINK ASCL6 and T harness in a 2022 tundra locks not working via app

Mon, 05 Aug 2024 17:20:56 +0000

Everything programmed and working minus the locks via the CARLINK app. The parking lights flash and mirrors start to fold in during lock but nothing from the lock.

Several ofthers are having the same exact issue

Any help would be awesome.

Thanks -B

Why does my factory alarm activate on remote start 2018 Toyota Tundra?

Sat, 21 Nov 2020 20:35:51 +0000

Installed recommended firmware.

Help with addding ASCL6 module using Flashlink

Sun, 16 Feb 2020 18:18:40 +0000

I purchased an Evo One a few months ago to add the ASCL6. Thought it was as simple as just plugging it in. Found out you need to purchase the Flashlink to set this up. Did that. Have no idea how to go from here. When I start the program it goes straight to asking me details of my vehicle:make, model, transmission, OEM alarm, System Setup, OEM remote, etct. Where or how do i add the ASCL6 optioin. I've tried everything and can't see to find the option to get this done.

Thar-one-toy2 vs thar-one-toy7 ??

Tue, 12 Nov 2019 08:12:36 +0000

What is the difference between toy5 and toy7 recommended harnesses for 2016 Toyota Tundra with G Key?

2018 Toyota Tundra Evo One hood pin connection

Sat, 29 Dec 2018 11:25:15 +0000

Hello, I am installing the Fortin Evo One with THAR-ONE-TOY10 wire harness on my 2018 Toyota Tundra. It is not clear where the Pink/Black wire is supposed to connect to the hood pin in the wiring diagram?

Thanks for help,

Evo One 2018 tundra: Intermittent start on 3x lock, and alarm goes off occasionally

Mon, 17 Dec 2018 20:24:24 +0000

I just installed an EVO one for my 2018 Tundra with Toy10 T harness setup, preprogrammed. The 3x lock button starts the truck intermittently. Is there a specific cadence to it?

Also, the alarm goes off occasionally when it remote starts after 3x lock.

Any ideas?

2007 Toyota Tundra Bypass Firmware Version?

Fri, 07 Dec 2018 11:49:57 +0000

The guide online says 79.[41] and the FlashLink recomends 79.[49]. Which one should I use?

EVO-One set for 30 min runtime but shutdown after 15 min

Sat, 13 Oct 2018 11:10:06 +0000

EVO-One set for 30 min runtime only running for 15 min MYcar shows 30 min runtime when starting truck just runs for 15 min shutdown howerver app is still counting down

Using Evo-One with MyCar Module on 2018 Toyota Tundra

Mon, 27 Aug 2018 19:13:24 +0000

Trying to get MyCar module to work with an Evo-One that works as expected with OEM key fob. Connect it Evo-one and program. Appears to program correctly, proper light flash after hold then pushing valet button 5 times with key on, hit brake and get confirmation. MyCar app shows where my car is on map, voltage of car and cell signal. It will not start car of do other functions. Fortin Tech says Evo-one should work with thos out of the box. cAN NOT FIND ANYWHERE IN fortan software to program cellular module.

THAR-ONE-TOY5 Harness for 2018 Tundra

Mon, 06 Aug 2018 00:39:23 +0000

I have a 2018 Tundra with an H-Key could I uses the Thar-one-toy5 harness to only have to cut one wire?

2018 Tundra No Parking Light

Fri, 25 May 2018 21:23:59 +0000

Installed Evo All with viper 5906V on 2018 Tundra everthing work fine except parking light

Auto light on : at day the DRL is on but no light in back, at night headlight is on

Auto light off : nothing happen

On the Viper brain set to +

how do i fix this issue?

Thank You

Service No: 001A06 815070
Preload date: 12-2018
Hardware version: 6
Firmware version: 79.47
Vehicle: TOYOTA TUNDRA 2018 - H-KEY

Cannot Learn MyCar Telematics Module - Evo-One

Sat, 17 Mar 2018 11:07:01 +0000

I am trying to learn/teach the Evo-One the MyCar Telematics module. I have followed the directions and preconfigured the Evo with the Fortin 2 option.

I cannot get the Evo into programming mode. I turn the Ignition to ON hold the button (next to loop) on the Evo for 5+ seconds as the instructions say, but the led never changes to red and remains amber. Any suggestions?

I should also note that my install was done using all T-Harnesses so I know I don't have any wiring issues. I tested the Evo for functionality before moving onto MyCar install as well and everything works great.

Here is the instructions: http://www.crimestopper.com/cstech/library/security/security_systems/remote_start/mycar_installation_guide_20171109.pdf

2015 Toyota Tundra alarm triggered on start and won't unlock with keyfob during remote start session.

Mon, 26 Feb 2018 17:49:29 +0000

truck starts with factory keyfob lock press 3x.

after it is running, it will not unlock with the keyfob.

also, if given time for the alarm to activate, triggering a remote start with factory keyfob lock x3 sets off the alarm.

i received unit pre-programmed from a seller.

thanks in advance for your help!

2018 Tundra does not lock doors after remote start.

Sun, 25 Feb 2018 16:20:20 +0000

2018 Tundra Evo One installed and programmed, remote starts works with 3x lock button pressings , doors unlocks before it cranks but it does not lock back up after vehicle starts even thou option D5 is set..

firmware 79.45

options C1 D2 D5 setting protection Y

Evo One remote start firmware version 1.2.4

options 2.4, 38.2

thanks in advance for the help.

Dan

2018 Toyota Tundra will not program Can Bus, what are next steps?

Tue, 13 Feb 2018 14:04:42 +0000

I have system fully installed. When going through programming, can bus programming yields a red light. Voltage on Can Bus Low is 2.42vdc Can Bus High is 2.62vdc on Fortin can bus wiring harness. I tried alternate can bus programming (let go of program button on blue light, turned ignition on, get blue flashing lights). I have tried reprogramming 10+ times, immobiliizer programming is successful. Using THarness. Open ticket is 10820

Bypass Firmware 79.45

Remote Start 1.24

C1, D2, 2-4, 38-2

2018 toyota tundra

Fri, 12 Jan 2018 18:04:27 +0000

got a 2018 tundra, bypass programmed fine, all wiring matched the guide.

bypass does not do immo, car just cranks

hardwired to a viper 4x06

RF642W engine kill and unlock sequence

Mon, 08 Jan 2018 17:29:50 +0000

how do i program the unlock button to only unlock driver door with one click and all other doors with 2 clicks?

How can I kill the engine if I remote started it and want to cancel?

2017 toyota tundra 1794 edition

thanks!

Blue led won’t stop flashing after I turn key to off position

Sat, 21 Oct 2017 21:38:05 +0000

I have a 2010 Toyota Tundra I have the wiring set up good, I start the programming process, hold the button it till red only light put the key in the ignition red blinks 10 times I turn key to run position (not start) the blue light flashes, then turn the key off and the blue light is still flashing directions say the blue light will turn off but is not any help thank you

2012 Tundra - 3x Lock trips panic, keyless does not work after remote started

Thu, 21 Sep 2017 16:32:23 +0000

I have had the Fortin Evo One remote starter installed for nearly three months, and it has worked flawlessly until yesterday. The 3X lock will now almost always (but not every time) cause the factory alarm to go off. It will also remote start the truck in the process, but will not allow me to use keyless to unlock/lock the vehicle. The running lights flicker when I press the unlock key on the fob, but nothing else happens. Two indicator lights, the Traction Control and ABS lights, turn on and remain on even after a successful/uneventful remote start. Any ideas?

2012 Tundra will not start, just continuously cranks over

Mon, 26 Jun 2017 23:11:15 +0000

So I purchased a pre flashed EVO One with Toyota 2 harness and RFTX64-2W remotes, for my 2012 Tundra. I hooked up all the listed wires in the install, which I verified multiple times per your diagram. All my connections are soldered and covered using shrink wrap tubes. I have read through all your Q&As and still have had no luck with the remote start. After the Tundra continuously cranks over, the parking lights flash 4 times. Please help.

2015 Tundra with Evo One SOMETIMES cranks without starting

Fri, 17 Feb 2017 20:16:12 +0000

I installed an EVO-ONE on a 2015 Toyota Tundra. 1 out of 5 times when he engages the remote start, the truck will crank for around 8 seconds without starting. The other times it starts perfect. Tach is set to data only, and is not set to crank for 8 seconds. He said also every once in a while the lights on the dash will shut off at night after a few minutes of driving. I used the t harness and as always, i soldered the rest of the connections.

Why will my doors not unlock with OEM fob after remote started 2015 Toyota Tundra SR5?

Sat, 07 Jan 2017 12:28:36 +0000

2015 Toyota Tundra SR5 all conections soldered, all other features seen to work correctly.

factory key fob 3x press to start

When i press unlock during a remote start session ths doors do not unlock, only the pakring lights flash.

Auto headlights stay on after remote start tundra 2014

Mon, 26 Dec 2016 11:18:24 +0000

Evo one t harness g key when headlights are in auto after remote starting with 3x lock and the timer runs out vehicle shuts of and no one enters the vehicle. the headlights stay on.

Remote Lock/Unlock does not always work on EVO ONE

Sun, 04 Dec 2016 14:09:25 +0000

I tested this in the vicinity of the truck to observe what happens inside the cab:

The truck was locked and off for at least an hour.

When operating the remote to unlock the car (Toyota Tundra 2016) the dashboard lights up and external lights flash once. A quiet click but the driver side door does not unlock. A second press on the remote and the cycle repeats but nothing unlocks.

I then use the key to unlock the door and open. No alarm sounds so it means the alarm is disarmed but the lock function is not working properly.

This happens about 50% of the time. The other 50% the doors unlock as expected.

I should add that if I were to use the keys to unlock the car before using the Unlock key on the remote the alarm goes off as exepected.

I have the four key remote and was programmed per the instructions. I should also add that the remote start and the lock (with confirmation) works reliably each time.

OEM FOB 3X lock, car starts, alarm goes on and can't turn off with FOB

Fri, 18 Nov 2016 21:23:35 +0000

2014 Tundra. EVO ONE with T Harness. Picked up truck at the dealear and worked perfect. Press lock 3 times and engine starts. Press unlock and enter truck. Put key in and turn to drive away. Perfect. I get home and show wife and imediatly the alarm goes off. FOB won't work. Put key in door and alarm stops. 2 seconds later the truck starts on its own and starter stays engaged for several seconds after the start. Put foot on brake and truck stays running. Try putting in gear and engine turns off. Anyone know what could have happened?

Tundra 2016 remote starts after 1x stays on with key in ignition but turns off without it

Sat, 10 Sep 2016 16:10:40 +0000

I flashed my EVO-ONE using the latest firmware and the FLASH Link.

I have Remote Starter option 2 to mode 4 as required.

I am running into three issues:

1. My REVO 1 remote starts the car with only one press (not 3X as I am expecting)

2. When the car starts the engine runs and turns off after about 15 seconds. However if I leave the key in the ignition the engine stays running (just putting the key in works; i do not have to turn it )

3. I can not get the device into programming mode using the valet switch (I turn ignition on and press the valet button but no programming mode)

Please HELP!!!

2016 Toyota Tundra (G-Key) Key-Sense Not Working....?

Sun, 15 May 2016 11:03:54 +0000

I have an Evo-All (EA) product connected to an Advanced Keys PTS & PKE system (AKS). The GWR from the AKS is connected to the blue GWR wire from the EA as directed to. Additionally, in order to get the EA unit to "act" appropriately, I have the unlock wire from the truck attached to the GWR wire as well. This makes everything work the way it should!

Now onto my actual question. Anytime I hook up the key-sense wire to the application, the truck ceases to either start and or immediately dies. Why is this? AKS says to use the GWR wire for the key-sense. There are other negative wires I can use from the AKS to simulate a GWR out to the EA. However the results are the same, the truck does not start and or dies immediately. I have also tried direct ground to the EA GWR wire with no luck! And as a last resort just to see if it was the wiring I installed, I hooked up the factory key sense connection it reacted the same way, died and or would not start.

I would like the key-sense to activate the automatic seat & steering wheel when I start the truck.

Can you please assist me?

Evo one & DEI smartstart cable

Thu, 31 Dec 2015 02:38:58 +0000

I got a viper smart start vsm200. From what I have been reading, I do not use the cable came with vsm200 unit. Is that right? So what cable do I support to use? I'm already used all the cable that come with the ax-one. Am I missing something?

Power steering column doesn't move when remote started

Wed, 09 Dec 2015 12:50:09 +0000

I have power tilt/telescopic steering column on my 2010 Toyota Tundra. During normal start up, I inserted the key the steering column move into present position. During remote start, the steering column doesn't move and when i get in the truck and insert the key nothing happend. Is there a wire that need to be connected?

Ax-One / EVO One Lights issue on 2015 tundra

Sat, 21 Feb 2015 07:43:36 +0000

hi there, i just had my evo one system installed today on my 2015 Tundra, the installer mentioned he had a hard time finding the parking lights or something along those lines, he said the guide was wrong ( i gave him both guide #18211 as well as the wiring diagram from wirecolor) i didnt really think anything of it because the remote start works but on my way home I realized something strange was occurring.

Sometimes the lights on my dash / guages goes out which made it impossible to see my speed at night, also once i enter the car and the lights turn on then go out but as soon as I shift from park to drive the interior lights come back on for about 10 seconds (really annoying). As far as my dash lights I can get it to come back on if I put the truck back in park then drive again, it resets it. Lastly, whenever my guages are out, Im also unable to activate my fog lights ? but again when I move the shifter to park and back to drive it resets everything and im able to get my fog lights back on. any ideas of what might cause this ?

red light stays on during step 5 of KEY BYPASS PROGRAMMING PROCEDURE

Wed, 11 Feb 2015 01:21:06 +0000

I have a 07 toyota tundra. I am installing EVO-ONE ALL IN ONE DATA REMOTE START/ALARM WITH T HARNESS AND CRIMESTOPPER REVO4 ANTENNA W REMOTES. I am following the steps on page 3 KEY BYPASS PROGRAMMING PROCEDURE. I am stuck on Step 4. The red light will not flash. I do not have the CAN LOW & CAN HIGH plugged in. I do not have the DATA1 and DATA2 wires plugged in. Do I need those plugged in? I do hae the yellow IGNITION WIRE tapped into the T harness and the KeySens tapped into the white 2 Pin Connector under the steering wheel.

2014 Toyota Tundra EVO-ONE Bypass Programming Step 4

Sat, 17 Jan 2015 20:05:16 +0000

I am installing a EVO-ONE on my 2014 Toyota Tundra. I followed the "Key bypass programming procedure" steps 1-3 went as instructed. When I perform Step 4 both red and blue lights stay on solid and do not flash at all. I have done a master reset but am not able to get step 4 to complete.

Any suggestions?

2014 Tundra will not remote start

Sat, 20 Dec 2014 13:10:59 +0000

I have a 2014 Toyota Tundra. Tried installing the EVO ONE with the T Harness. after doing the wiring and programing the unit, the truck will the turn over. i am running on the latest verson 79.24 and 1.15. all the wiring seems to be correct, when ever i press the lock or unlock on the remote, just te blue light flasses on the EVO ONE. Any help would be appriciated.

Evo-One for 2014 Toyota Tundra. Horn/Siren output not working

Sat, 13 Dec 2014 17:23:08 +0000

I am trying to use the Horn/Siren output (-) on Evo-One for after market siren. It is pink/black wire accoring to the manual. I am running 79.24 and 1.15 on my Evo-One. I tried different combination of option for #12 but I am not getting any voltage detected on orange/black wire. Can you check the option on my Evo-One and let me know whether I have the options right per my service number? I would like to have a after market siren to give me a chirp when I am clicking the lock button on the remote whether I am locking the car or unlocking the car or what so ever. I set option 11.2 to cofirmation on LOCK/UNLOCK always.

Evo-One for 2014 Toyota Tundra 79.20 Hood sensor was diabled to remote start.

Sat, 06 Dec 2014 16:16:51 +0000

Hello, I installed Evo-One on my vehicle yesterday. 2014 Toyota Tundra. I called support this morning because the remote start was not working. After the calling the support, he had me disabled the hood detect because was constantly flashing five times when I try to start the vehicle. I just tried again and set to detect hood and it would not start and flashs five times. I disabled it again and it works fine. Is this a bug with the firmware? I am running 79.20 and 1.15 on my Evo-One. Support checked that there is nothing connected to one of the wire for hood switch. I did not install the hood switch. Wondering...

Evo One bypass settings for DEI DSM250?

Fri, 05 Dec 2014 17:11:37 +0000

Hi -

An Evo One is installed on a 2014 Tundra, and being used for remote start (3x lock), works great, awesome product! A DEI DSM250 is being installed as an extenstion onto the Evo One, and we would like to confirm the proper settings via the flash loader.

This is what we believe needs to be set on the Evo One...

Flash Loader - Bi-Pass Settings (?):

#20 - GPS / I/O (the DSM250 is GPS enabled where as the DSM200 is only "RemoteStart")

#21 - D2D

#23 Supported RF Kits Available - select #4 (DEI Smart Start)

Flash Loader - Remote Start Settings (?):

It doesn't appear I need to change any of the functions 1-39?

Thanks in advance

2007 Tundra takeover leaves dash warning lights on

Tue, 05 Aug 2014 13:45:04 +0000

I have a Crimestopepr LC-4 hooked to an EVO-all on an '07 Tundra with tip start. I have everything working but after start when I try to use the key takeover I get the traction, ABS and RSCA lights left on. They will not go off unless I turn the key off and back on. I also notice the guages do not seem to operate until after I hit the brake. I have the ign wires powered so there should not be a missed wire b ut I could be wrong. Has anyone else experienced this?

Can't find door locks on a 2006 Tundra

Thu, 20 Mar 2014 14:58:54 +0000

hi i called about 2006 tundra for door locks i dont know if guys can keep looking into it i need to figure this out customer wants the door locks please let me know

using a int-sl+ on a toyota tundra 2005 require version 0.17 it wouldn't let flash this version!!

Fri, 06 Dec 2013 11:48:20 +0000

I updated & flashed it 2 3.02 but your instructions say use version 0.17...I tried calling for over 1 hr & lines r busy