/en/qa/tag/transponder_connector Powered by Question2Answer /en/qa/103555/key-transponder-fuse-keeps-blowing I have 2016 Ford Escape, using the tharfor1 t harness. The module programmed and the remote start works but now the keys won&#039;t work. The fuse for the key transponder keeps blowing. The wires at transponder do not seem to line up with the harness. I have since disconnected the remote start and replaced fuse so keys now. Ford /en/qa/103555/key-transponder-fuse-keeps-blowing Sun, 14 Mar 2021 17:05:08 +0000 /en/qa/93955/2010-rav4-standard-key-with-dot-wrong-photo-of-transponder-connector Hi!<br /> <br /> I&#039;m trying to install EVO-All with Avital remote start in my 2010 RAV4 standard key (had dot on the blade).<br /> <br /> The Fortin guide shows transponder connector as black with 7 wires (needed for TX and RX wires). I CAN&#039;T FIND IT!!!<br /> <br /> I found black connector with TWO rows of wires but I&#039;m not sure if this is correct one...<br /> <br /> I read installation guide for 2011 model and they talk about IMI/IMO wires in engine compartment...<br /> <br /> I activated my 48 hours key to browse the guide but it doesn&#039;t help me...<br /> <br /> Any ideas?<br /> <br /> Thanks in advance!!! Toyota /en/qa/93955/2010-rav4-standard-key-with-dot-wrong-photo-of-transponder-connector Mon, 23 Dec 2019 00:07:57 +0000