Questions & Answers - Recent questions tagged tundra

no parking lights

Tue, 01 Apr 2025 08:44:22 +0000

when i start car with ignintion switch parking lights work. when i do through the remote start i get no parking lights. i reflashed multiple times

Module evo-one

serial 002b04327727

2023 tundra install

Mon, 22 Jan 2024 19:42:23 +0000

i already have an evo one all from my old car and have a few questions

1) will the THAR-ONE-TOY16 work on my 2023 tundra since is the same as the 2022 and the start x remote start which is just an evo one works on both?

2 where do the diodes go i dont see them on the diagram

3) what is the THAR-TY120 is that an additional harness or is it built into the main harness cant seem to be able to google an answer

i realy want the remote start to be able to control the doors on the cellular app and start x says there's cant even though its just a rebranded evo one and comes with a fortin programer

also its cheaper to get the harness than get the whole start x kit since i already own a evo one and a cellular module

Tundra Starts but door do not unlock with fob

Sun, 12 Mar 2023 13:41:09 +0000

2021 tundra Starts with oem fob and evo start2 but the fob doesn't unlock the doors

Tundra parking lights

Thu, 09 Feb 2023 18:40:54 +0000

I have a evo one on my tundra. Is there a way to not have the parking lights come on? It flashes the parking and tail lights after I un lock or lock the door.

2020 Tundra OEM alarm orange wire spliced in?

Tue, 08 Nov 2022 09:29:03 +0000

Hard to tell from install guide. For OEM alarm, does the orange wire need to be spliced into the wire? Does it matter whether it is spliced into the original plug or the T-harness?

2020 Tundra how do I make the engine not turn off when I open the driver's door?

Thu, 29 Sep 2022 19:58:11 +0000

Successful install, 2020 Tundra PTS, Evo-All, 79.69 Bypass FW, T-harness, RF642W remotes.

Remote start works just fine. As soon as I open the driver's door the engine shuts off. Tried even unlocking before opening but still shuts off upon opening.

How do I put an end to this?

2008 Tundra 3x oem remote start using Evo one stand alone

Thu, 16 Dec 2021 00:38:02 +0000

Is it possible to use the Evo one stand alone and the oem fobs on a 2008 tundra dot key? If so how to configure the Evo and what extra connections need to be made. Thank you.

16 Tundra, Evo Key, no start

Fri, 10 Dec 2021 00:11:37 +0000

Used connection 5, programing 3 in manual. Wires were easy to find, did not use key sense. Believe truck does have a factory alarm (If that matters), it does have a factory keyfob. Programming does what it says it will do. Remote start is a Viper. Everything remote starts fine if I leave the key in the ignition. If I don't, security light blinks and remote start doesnt work. I have the flash link and everything was already updated, and it didn't give me any options to change or adjust anything. Just update.

GWR is connected to the Viper. Only the red light comes on the EVO Key if I remote start it. Is this normal? I'm sure im forgetting something.

2019 & 2017 Toyota Tundra crank no start, starts sometimes

Sun, 05 Dec 2021 18:48:08 +0000

I had 2 installation today on 2019 & 2017 Toyota Tundra, both had same issue. Both trucks would crank only with no start. But sometimes it would start during the first remote start attempt and sometimes it would start on the 2ed attempt after the first attempt timed out. I used a crimestopper RS4-G5 with an Evo-All. I have installed many units over the years and I dont think it is a coincidence that I had the same issue with both trucks. Is there anything I could have done wrong for this to happen. I even changed the communication protocals on to see if that would help and it did not.

2007 toyota tundra evo-one install with fortin remote sets off alarm at remote start

Tue, 24 Aug 2021 11:32:49 +0000

Alarm worked fine for a couple of days after the install. Now 3 times out of 5 it triggers the oem alarm when trying to remote start. I checked the light green wire(disarm) and it seemed to get good connection.

2018 Tundra, OEM alarm connection (orange wire)?

Sat, 13 Mar 2021 14:32:10 +0000

Nevermind. I figured it out.

2006 Toyota Tundra Standard key, No guide

Tue, 19 Jan 2021 07:52:27 +0000

Hi, I want to install a EVO-ONE into a 2006 Toyota Tundra with immobilizer system.

The Fortin website does not show a guide, yet it indicates compatibility. Is there a guide available for this vehicle?

Thank you.

2021 Tundra PTS solution

Mon, 11 Jan 2021 18:29:22 +0000

Hey Guys ! Do yo have any idea on when PTS Tundra will be supported ? Got many request from customers...

Thanks in advance

Tundra G key 2010 Final program fail

Mon, 04 Jan 2021 03:56:51 +0000

2010 Tundrea with G key. Harness bought so no cutting/soldering of wires. I get to the final stage (this has been going on for weeks) and I connect the unit with the big white cable whilst holding the program button in. The lights flash as they should red/yellow/blue.I stop on red and blue. I then connect the 3 remaining cables larger white, smaller white and red. Press the program button twice and the red blue light flashes and never completes.IF I enter the key and turn the igntion on before pressing the progrsam button twice it DOES complete but then the truck cranks but does not start as it is still immobilsed. So have run out of ideas on this.

Secondly I bought a flash link and had it sent to Asia where I live and this is now showing "limit reached"??This is service l number 002504 07557 for Evo One module serial number 002B04 015151.

So can you help with the program problem and also reset my Flash Link. I am 12 hours ahead of Canada so "calling" cusstomer care from the other side of the world does not work.

Thanks for any help you can give

Replacing broken evo one unit with another on a 2010 Toyota Tundra.

Thu, 10 Dec 2020 00:39:34 +0000

My evo one was working great in my 2010 Toyota Tundra standard keys for about 6 years. When installing a new my car unit, I accidentally broke one the connector from the evo one unit. So I got another evo one unit and install it. I could not program the evo one with the newer guide. I think my t-harness was a toy1. So I got it to programmed with the blue light, turn the key, and the blue light flashed rapidly. I got the vehicle started 1 and it never start again. The red light by the programming button flashing. I don't think it does that before. Please help

Why does my factory alarm activate on remote start 2018 Toyota Tundra?

Sat, 21 Nov 2020 20:35:51 +0000

Installed recommended firmware.

Accessories or radio does not turn on with remote start- fortin evo one t-harness

Sun, 07 Jun 2020 18:14:59 +0000

My accessories i.e. radio, usb plug in do not turn on with remote start. I sit in with and turn key in ACC, radio and accessories turn on. Once I turn the key in IGN, SRS airbag light stays on. I believe once accessories and radio are able to turn on with remote start, SRS airbag light issue will resolve. I have the T-harness, mycar and long range remote as well. How do i wire this up so accessories, radio and even A/C turn on with remote start?

2013 Toyota Tundra starts for a few seconds then shuts off

Sat, 11 Apr 2020 21:18:55 +0000

I have tried everything. I am pretty sure it's programmed correctly. It starts then shuts down seconds later. I am all out of ideas and ready to give up. Service number 002BO7 339682

Help with addding ASCL6 module using Flashlink

Sun, 16 Feb 2020 18:18:40 +0000

I purchased an Evo One a few months ago to add the ASCL6. Thought it was as simple as just plugging it in. Found out you need to purchase the Flashlink to set this up. Did that. Have no idea how to go from here. When I start the program it goes straight to asking me details of my vehicle:make, model, transmission, OEM alarm, System Setup, OEM remote, etct. Where or how do i add the ASCL6 optioin. I've tried everything and can't see to find the option to get this done.

2019 Tundra Platinum Tilt/Telescoping Steering Wheel and Fog Lights

Tue, 24 Dec 2019 17:50:39 +0000

Just got the Evo-One and the THAR-ONE-TOY10 harness for Christmas. Installed it and everything seems to be functioning except for 2 items.

-Fog Lights. Those no longer turn on. Doesn't matter what mode the headlight switch is in, the fogs will not come on.

-Power Tilt and Telescoping Steering Wheel and Power Seat. When you put the key into the ignition, the steering wheel will come out to your setting, along with the seat will move, This still works if the truck is off before inserting the key, but when it is remote started, this no longer works, and you have to press the memory button to reset the locations. There was a similar question listed here, which had a workaround, but that unfortunatly does not work in my truck.

Thoughts? Are these firmware issues?

2020 tundra h key tpms wire

Tue, 24 Dec 2019 12:09:58 +0000

do you have an updated wire location for the 2020 tundra tpms wire? 18-19 shows pink wire on the 20pin white connector in the lower kick panel and the 2020 wire at that location is not pink and is not for tpms.

2020 tundra h key tpms wire

Tue, 24 Dec 2019 12:09:57 +0000

Fortin Evo one plus RFk942 can’t get it work 6 hours of trying 2014 tundra

Sat, 23 Nov 2019 23:51:24 +0000

Ok here is the basics I have the eco one hardware 2.xx I just updated the firmware in the bypass and the other section. Forgive me I'm tired and can't remember.

"As for the RF kit, the only option you need enabled is RFLF in the remote starter options". As per the instructions "Press and hold the valet switch until the parking lights turn ON, the horn/Sirn will chirp" this does not happen. Step 2 works "Press and hold the valet switch or the antenna but- ton until the Parking lights turn ON, the horn/siren will chirp" But thats to "ERASES ALL REMOTES THAT HAVE BEEN PROGRAMMED AND RESETS ALL FUNCTIONS BACK TO DEFAULT."

i have no idea what I am doing wrong? I can't get past step on by pressing the recently connected valet button to start the RF kit instructions. I also Don't see "RFLF" anywhere in the flashlink updater

my problem is I don't think my valet switch is working. I had been using the OEM Toyota 2 button remote for years.

when I originally installed and programmed the Evo One the valet switch was not installed.. could this be a problem?

2011 tundra just cranks. Using Evo one with toy7 harness and Evo start2.

Sun, 17 Nov 2019 15:59:18 +0000

Installed Evo one with Evo start 2 mobile using tharness toy7 on a 2011 tundra h-key. All settings set up correctly. Tapped into key sense wire for factory alarm and tapped yellow wire from mobile antenna to pink wire on ignition harness. Unable to program the remote that comes with it and when I remote start with factory key fob car just cranks...it starts if I put the key in the ignition but then I am unable to turn Off the car without unplugging the Evo one. Any ideas?

When my autostart times out and shuts truck off, the alarm goes off, how do I disable this?

Wed, 13 Nov 2019 12:14:00 +0000

Using the EVO-ONE with the T Harness, When the autostart times out and shuts the truck off, it will sound the alarm. How do I configure things so that the truck will shut off and return to a normal OFF state?

So far this thing is fantastic, I love it! Also, where do I learn more about what I can do with it? I have the RF remote kit, and there is an accessory button on the remote, I'd like to use that to install a tailgate popper. Where do I read about how to use all the feautres avaialble on this wonderful thing?

MyCar Programming without valet switch

Sun, 27 Oct 2019 15:40:30 +0000

How do I enter programming mode to get the MyCar module programmed without a valet switch? I have a 2013 Toyota Tundra and installed the Evo One in 2015. Everything works fine. I'm unable to get the Evo One into programming mode to accept the MyCar Telematics module (because I never had a valet switch). Is there any other way to get into programming mode without a valet switch?

MyCar Programming without valet switch

Sun, 27 Oct 2019 15:38:27 +0000

Strange behavior

Wed, 30 Jan 2019 20:10:02 +0000

Has been working great since install a couple years ago. Now internmittently after I have remote started the car and it is still running, I will unlock just fine with the fob but when I press the brake it will turn the starter (making a terrible screetching noise) and not kill the motor. It even did this once before I even inserted the key. Also intermittently the lock botton on the oem fob will beep twice when it used to be once.

2019 Tundra EVO-One what is the trick to get the factory FOB 3 button press to work for remote start?

Thu, 17 Jan 2019 17:28:31 +0000

I can start my truck with the Fortin 642 remote but the 3X lock feature on the OEM FOB will not work. What is needed to make this work.

Has anyone successfully installed an EVO-One on a 2019 Toyota Tundra?

Mon, 07 Jan 2019 16:14:45 +0000

I installed an EVO-ONE on my 2019 Tundra Platinum and it worked for about 2 days and then lost all programming. I am pretty sure that the module failed and have a replacement on order but has any one been successful in installing one on the 2019 Tundra?

tundra 2006 immobiliser bypass

Sun, 30 Dec 2018 15:36:24 +0000

Hi, I have A 2006 toyota tundra cnd spec with factory immobiliser, on the website, it only give int-sl+ which only do the door lock, tried a used keyoverrideall like the diagram for the 2006 toyota sequoia (which is almost the same truck) but it doesnt work, it wont program, is there another option or do i need a spare key to make it work?

thank you

Evo One 2018 tundra: Intermittent start on 3x lock, and alarm goes off occasionally

Mon, 17 Dec 2018 20:24:24 +0000

I just installed an EVO one for my 2018 Tundra with Toy10 T harness setup, preprogrammed. The 3x lock button starts the truck intermittently. Is there a specific cadence to it?

Also, the alarm goes off occasionally when it remote starts after 3x lock.

Any ideas?

2005 Toyota Tundra 4 DOOR Can't find doorlocks wires in kick panel

Sun, 25 Nov 2018 18:23:13 +0000

Cannot locate Doorlock wire colors in drivers kick and nothing from the door meters out high or low in regards to switching. Am I missing something here? I've tried 10 different sources and they all claimed different options and wire colors. Non of them panned out.

2015 Toyota Tundra Evo One remote start alarm goes off on remote shutdown

Wed, 24 Oct 2018 21:24:19 +0000

**This may be a duplicate post but has more info and i will try to hide the other post

installed evo one in my 2015 tundra with OEM alarm. The truck does remote start fine (after the doors unlock and relock) but if it runs for 15 minutes, the alarm goes off. If I remote shutdown right after remote start, it works as it should. If i remote start and wait 5 minutes and remote shut down the alarm goes off. I have hooked up the keysense wire to the black wire as instructed in the diagram. Alarm is triggered when using RF 642 remote or OEM 3x lock. I did use a pre-wired kit that had both plug and play adapters for the Tundra. Updated to 74.49 via flash link but no change.

2018 tundra cranks but doesn’t start

Wed, 19 Sep 2018 19:27:39 +0000

It was working fine I changed some settings with flash link , now starter turns but truck start, can you check my settings to see if I’m missing something ?

Bypass C1 and D5

Using Evo-One with MyCar Module on 2018 Toyota Tundra

Mon, 27 Aug 2018 19:13:24 +0000

Trying to get MyCar module to work with an Evo-One that works as expected with OEM key fob. Connect it Evo-one and program. Appears to program correctly, proper light flash after hold then pushing valet button 5 times with key on, hit brake and get confirmation. MyCar app shows where my car is on map, voltage of car and cell signal. It will not start car of do other functions. Fortin Tech says Evo-one should work with thos out of the box. cAN NOT FIND ANYWHERE IN fortan software to program cellular module.

Incompatible bypass firmware

Mon, 06 Aug 2018 21:39:48 +0000

I am trying to update my brand new evo-one. This is what I show

Then If i try to update it I get

The remote start firmware updated just fine. I just cant get the bypass to update. If re try it brings me back to the first screen

Sorry It doesnt show the pictures for whatever reason. The first screen I get it invaild firmware 79.47 and the second screen tells me no module dected plase connect a compatible unit

2011 Tundra EVO-ONE+TOY7 sometimes shuts off when on door opens, sometimes keeps flashing parking lights.

Sat, 04 Aug 2018 11:29:42 +0000

2011 Tundra Limited with G-key, installed EVO-ONE with THAR-ONE-TOY7 kit.

About 1 out of every 5 or so remote starts the vehicle will shut down when I open the door. When it does this the parking lights will keep flashing even after starting with the key and driving and shutting off again, until the alarm is Armed and then Disarmed.

It has also continued to flash the parking lights on at least one occasion after properly handing off to the key.

When the lights continue to flash there is No indication from inside the vehicle that they are flashing. No relay click, no dash lights.

The result is that every time I start the truck and hand off to the key I'm walking around front to be sure the lights are not flashing.

The inconsistency has me stumped. Please help me troubleshoot.

EDIT: I've noticed now that the lights do Not flash when it is properly running on remote start. Seems to be only on some of the failures?

2018 tundra with evo one and drone

Fri, 27 Jul 2018 03:02:24 +0000

I am planning to buy the drone-mobile add-on. I understand that the drone-mobile kit requires the evo-one remote-start firmware to be downgraded to 0.50. Will this downgrade affect the operation of the evo-one on my 2018 tundra? I know that the 2018 tundra requires a minimum bypass firmware version, but does it require a minimum remote-start firmware for the evo-one to work (and subsequently the drone add-on)?

2000 tundra AT unfinished install

Tue, 24 Jul 2018 19:18:24 +0000

I removed dealer installed car alarm and I want to use remote start function on EVO One and RF642W remote. The Unit gets power and I release program button on the red led. Turning key to the on position extinguishes the led. RF642W keys will not sync with unit. I press and hold the valet switch and never get a chirp or a parking lights blink.

What is correct procedure to flash previously programmed Evo One to another vehicle?

Sat, 21 Jul 2018 13:31:06 +0000

I incorrectly ordered a preprogrammed 2010-17 G-Key Toyota Tundra Evo One. I found that I have a standard key 2010 Tundra.

what is correct procedure to flash to the EVO one to standard key tundra (It has not yet been installed in vehicle)?

No install guide for 2004 Toyota Tundra without immobilizer

Wed, 18 Jul 2018 18:07:23 +0000

Can not find an install guide for a 2004 Toyota Tundra without an immobilizer. Where can I located one?

After truck remote starts. Then when the key is in the on position and the brake is pressed the starter engages.

Wed, 09 May 2018 21:31:39 +0000

Evo-one is programmed with the latest firmware recommend for a 2015 Toyota Tundra. Triple checked all the wiring. Tryed sevral different remote start and bypass firmware programs. Unit was in my Durango and reprogrammed for my Tundra.

Can Evo-all by itself use remote starter for Toyota Tundra 2015

Sat, 05 May 2018 12:37:44 +0000

Dear technical support,

I bought an Evo-all and installed on my 2013 Lexus RX350(push start/stop button) the remote starter work awesome. Now I bought one more and going to use for my Toyota Tundra 2015, G-key as remote starter. I just wondering if this unit will work by itself with an option D2 just like my Lexus mentioned above. Thank you for all your help!

Regard,

Hung

removal of evo one with t harness in 2016 tundra with g key

Tue, 24 Apr 2018 09:00:07 +0000

I would like to remove an evo one from my 2016 Toyota Tundra (G-key) with t harness to put it in my 2018 tundra. My question is, can I remove it safely by just unplugging the unit. what is the safest easiest removal method to return the vehicle back to factory setup (it has a factory installed remote start).

Which T-Harness for 2008 Tundra?

Sat, 22 Apr 2017 16:14:39 +0000

On this site, it says a T-Harness is available for the 2008, but when you look at the Supported Vehicle list for THAR-ONE-TOY2, it's from 2010+. So which T-Harness is it for 2008 Tundras?

2015 Tundra Evo One alarm/horn goes off every few starts. Not everytime. D2 is enabled

Mon, 09 Jan 2017 16:24:00 +0000

Also not able to unlock with OEM fob during remote start session. Blue led will flash twice when unlock is pressed but nothing happens.

entered activation key for 2005 tundra nothing appears

Sat, 31 Dec 2016 09:40:57 +0000

no info on fortin either tried also 2004 and 2006 tundra

EVO-All Installation to Toyota Tundra 2014- 1794 edition

Wed, 26 Oct 2016 10:08:48 +0000

Dear Sirs,

I have Toyota Tundra 2014- 1794 Edition and I wish to instal Evo-All for remote start.

Please provide wiring instructions for my model.

BR.

which model of T-Harness i can use for toyota tundra 2007 ?

Mon, 10 Oct 2016 12:20:15 +0000

hello . in the fitment site said the t-harness is available for 2007 toyota tundra , but does not said the model , so which model of t-harness i need to get?