Questions & Answers

2013 A8 remote start

0 votes
Hello. I installed Evo-All on 2013 A8.(The car owner brought the Evo-ALL module himself). It only worked with the old firmware version 60.{10}... It started with three presses on the OEM remote, but it wouldn't turn off. Then I connected the white/black wire instead of the light/blue wire, and everything was fixed. Is there a mistake in the instructions, or what?
posté Juil 30 dans la catégorie Audi par G M (20,950 points)

1 Réponse

+1 vote
Hello,

Do you have the S/N number to the module in question?

Best regards
répondu Juil 30 par Derek J (400,160 points)
001A07800779
commenté Juil 30 par G M (20,950 points)
On new firmware it was programmed successfully, but when pressing the button on the standard remote control the blue LED did not respond.
commenté Juil 30 par G M (20,950 points)
"but when pressing the button on the standard remote control the blue LED did not respond."

That is because 61.xx and 67.xx are not supported for the install you followed.

I will submit a report because it should have worked with the lt.blue wire. You can leave it as is if it is currently working.

Thank you for the information.
commenté Juil 30 par Derek J (400,160 points)
Yes, I left it on the white/black wire. It works fine.
commenté Juil 30 par G M (20,950 points)
Then, where are the connection diagrams for firmware 61...67? Since 2019, right?
commenté Juil 30 par G M (20,950 points)
modifié Juil 30 par G M
Yes you are right, 61.xx is key wrap on newer vw/audi and 67.xx is key bypass on select vwaudi vehicles.
commenté Juil 30 par Derek J (400,160 points)

Questions associées:

...