Questions & Answers - Questions récentes tagguées -oem-alarm

2018 KIA Niro PTS Hybrid OEM Alarm honks twice with remote start

Sat, 12 Apr 2025 17:25:30 +0000

2018 Kia Niro PTS Hyrbid installed a compustar remote start system with EVO-ALL, everything works fine but I get 2 horn honks during runtime as if the factory alarm kicked in. Is there a key sense wire that needs to be hooked up since Kia did the updates to all of their cars so they don't get stolen?

2005 Toyota Camry Starts but factory alarm gose off

Fri, 07 Feb 2025 12:49:24 +0000

Hello Everone

We installed a EVO One Sin# 002B04690023 with 411 RF kit on this 05 Camry with installation guide # 84961 we folowed it to a T the vehicle starts fine but when the factory alarm sets it gose off with it running. Do we forget or need to set something in the evo one to disable or bypass the alarm we can't find any setings for this Please help.

Thanks,

2017 toyota lc 200

Sun, 11 Dec 2022 03:49:30 +0000

I installed an Evo-All and a remote start alarm on a Toyota LC 200 (2017). Remote start sets the car to factory alarm and if I open the door with the alarm installed, the factory alarm goes off. The doors are closed with a purple wire and it will arm, but when I open it with a purple-white wire, the standard(factory) alarm goes off. evo-all 001A07312787

Remote start shutdown trigger OEM alarm 2014 Toyota Camry PTS

Fri, 09 Dec 2022 08:26:17 +0000

I have installed an evo-all (s/n # 001AO7065000) in a 2014 toyota camry pts, its work as expected except its will trigger oem alarm either by my or timer. I have turn on the disenable alarm prior to start/enable after shutdown option too but its still trigger alarm, every morning the oem trigger right after remote start shutdown getting very annoying. Also i have installed mycar module with the evo-all, mycar module have an option that will detect the alarm (alarm input detection) and push notifications on the phone but i dont see that the evo-all (harness) have any output to horn that i can tap into for the (alarm input detection) to work. Please advise, thank you so much. This is a repeated question and im apologize for that, because its getting very annoying that the oem alarm trigger at 6 am. Im desperately need help

Door trigger stays open when connecting the 20 pin, remote start works okay.

Mon, 05 Sep 2022 13:03:02 +0000

Hi, Everything works fine with the remote start however, the door ajar light in the dash stays always on. And when I disconnect the 20 pin connector, then the door ajar works fine. I have connected the dk.blue wire to the lt.green wire at the fuse box as instructed. Also I have programmed the 32.5 option. The car has oem alarm. SN 002B04 251304 Any ideas? Thanks