Questions & Answers - Questions récentes tagguées 2013

What system do i need to buy to remote start my 2013 audi q7 tdi

Sun, 11 Aug 2024 03:13:32 +0000

What system do i need i would like to use my factory remote.

Request to Reset Fortin Unit

Sun, 26 Feb 2023 15:07:56 +0000

My car Honda Accord 2013 Standard Key i want to set the unit serial number 002b04166354

2013 Ford Fusion remote start inop

Mon, 06 Feb 2023 15:49:05 +0000

I have a 2013 Ford Fusion with key ,installed with an Evo All unit with a T- harness 3 . The problem I have is that after the lock button is pressed 3 x you can hear unit chicking red yellow and blue lights come on like it trying to start vehicle. Then Im getting an red error code of 3 flashes , according to some research I believe that's a tach signal error. correct me if im wrong. All help and advice will be appreciated. Thanks

Takeover steps/procedures for 2013 Accord PTS

Fri, 30 Dec 2022 15:19:35 +0000

Hi. Is takeover possible on 2013 Accord PTS? If so what's the procedure? Currently it shuts off when I get in and push the brakes.

2013 Hyundai Accent

Wed, 07 Sep 2022 21:05:21 +0000

Hi there! I am having the next problem. When installing the Evo one on my 2013 Hyundai Accent the blue programming light turns off when I turn the car on and the light comes back on when I turn it off have the can wires on the right ones do I need the can wires to use the remote start? What options do I need to change the serial number of my evo one is 002B04 247461 The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65. Could you help me please, what going on? Thanks you

2013 elantra gt

Wed, 02 Feb 2022 13:45:00 +0000

I installed an evo-one on a 2013 Elantra GT (PTS) today. The firmware says that the OEM remote will not operate while the engine is running ... But, it works normally ... It both opens and closes. What's the matter?

Do you have to connect wires through the 20 pin connector and the 5 pin can connector?

Fri, 10 Dec 2021 12:39:14 +0000

I just want to have the remote start feature on my 2013 ford fusion standard key. What do I need to do to accomplish this? I have the correct t harness and an evo all.

Problem for instruction installation - 2013 hyundai santa fe evo one

Mon, 22 Nov 2021 23:21:37 +0000

Is no possible to information how installing evo one to 2013 hyundai santa fe push to start- i try on ios, google chrome, opera , iexplorer ... still no succes

Compatible with EVO RS -ALL IN ONE - FORT 1 on 2013 Mustang manual transmission vehicles?

Tue, 19 Oct 2021 21:55:48 +0000

Compatible with EVO RS -ALL IN ONE - FORT 1 on 2013 Mustang manual transmission vehicles?

I would like to know exactly how to remotely start the s197(13y) Mustang manual transmission.

evo one tried to install but the antenna did not came out the light when I put key on

Tue, 23 Feb 2021 22:10:47 +0000

i set it up everything but tried to set it up remote

the antenna did not light came out

how i need to do?

2013 toyota camry

yellow light stays on when I plug in the 20 pin, and get the key to program

Tue, 02 Feb 2021 17:01:31 +0000

we get to programming the key on y 2013 ford focus and the light stays yellow when I plug in the 20 pin and then its goes to red and yellow and it won't program.

2013 Honda odyssey EX Automatic Remote Start Installation Video

Tue, 29 Dec 2020 17:38:39 +0000

2013 Honda Odyssey EX automatic with factory installed keyless door entr and Regular Key start.

1,Will EVO-One work ?

2, What Harness do we need to oder with EVO-ONE?

2. Appreciate link to Installtion video for this vehicle?

2013 hyundai santa fe ignition on but no crank

Sat, 26 Dec 2020 18:54:56 +0000

Remote start is in and programmed. Evo all is programmed. 2013 hyundai santa fe push to start. Hit lock button 3 times, ignition on vehicle never cranks. I have rechecked all connections and they are good. At the end of the evo-all programming it says the red led should flash 10 times, then blue should flash fast, then red flash fast. Then turn ignition off. The red flash fast never happens. I dont know of that's related or not.

Wont start with remote and killing battery when pressing lock button 3x.

Mon, 21 Dec 2020 08:58:32 +0000

2013 gmc terrain

2013 Toyota Venza takeover?

Sat, 29 Aug 2020 10:43:51 +0000

I have Evo All hardware version 6 latest firmware, when I open the door the vehicle shuts off, is takeover available?

2013 Toyota Tundra starts for a few seconds then shuts off

Sat, 11 Apr 2020 21:18:55 +0000

I have tried everything. I am pretty sure it's programmed correctly. It starts then shuts down seconds later. I am all out of ideas and ready to give up. Service number 002BO7 339682

2013 Dodge Journey automatically unlock when pressing lock button

Sun, 01 Mar 2020 23:49:27 +0000

reinstalled after finding a loose wire and system was working off and on. After reinstalling the alarm, compustar CM600-AS, it is workingfor the most part however now when i press the lock button on the Compustar remote it locks and a second or 2 later it unlocks but alarm is still set. when i press unlock i can hear it pulse twice to unlock.

previously i had done the standalone installing and for the most part had no issue with the exception of the loose wire but this time went with the standard installation. confirmed all the wires are connected correctly and date protocal is correct. i am sure it is a setting just not sure which one i will need to turn on or off. any help will be greatly apprciate it.

2013 Honda Accord PTS manual clutch bypass and hood pin?

Sun, 05 Jan 2020 07:04:18 +0000

Hello,

Just bought the EVO-ONE and HON-3 for my 2013 Honda Accord PTS manual. I realize I have to bypass the clutch. Could u tell me the color/location of the correct clutch wire and which wire to connect to off the unit? Also is there a factory hood pin I can connect to instead of installing one?

Thank you in advance!

DCryptor Process - 2013 Ford Focus

Fri, 03 Jan 2020 20:41:30 +0000

Hello, I have a 2013 Focus Standard Key. I am using a EVO RS FORT 1 system with flashlink 4. The car will act like it is about to start, will say no key detected. I have looked in the installation guide and we do all insturctions, then when we plug it into the flashlink manager to clone the key through the dcryptor process, it will say no key info. How do I get the module to have 'key info'? Any info helps. Thanks

2013 Focus - What update do I need/How do I get pass the PATS system.

Wed, 01 Jan 2020 10:55:53 +0000

Car will light up and act like its on, but car wont start and the display will say No Key Detected, which makes sense, but how do I get it to not say that and start? Also what firmware version do I need for it? It's an EVO RS FORT1 system. Any info helps! thanks

Smart Entry Warning Lights on 2013 Honda Accord PTS

Sat, 21 Dec 2019 17:19:18 +0000

I just had my EVO One with T Harness installed to my Honda Accord EXL-V6 Sedan PTS.

It start Engine as it supposed to with 3 times lock button on OEM Remote. and Engine Stop as I open a door as it supposed to.

Smart entry warning light stay on as soon as I re-start engine. (Before I open door to stop the engine(Secure TakeOver) I don't think I see Smart Entry Warning on dash, )

What is a possibility of I missed during installation?

- I hooked up parking light wire but no horn wire hooked up.

- I may have selected "NO OEM Alarm" during programing process.( I think mine has Alarm )

Above two are items I might made mistake during installation.

How can I fix this issue?

Beside the warning lights stay on, the system seems working correctly. ( I can open door with key in my pocket, I can't start engine without Key fob in my car, )

What wires need to be connected to 20pin?

Sat, 21 Dec 2019 00:48:54 +0000

I have a 2013 Standard Key Ford Fusion. I bout the Evo-all and T-Harness but am kind of confused. I know that I need to wire the yellow, light blue, light blue/black wires together. But what else do I need if all I am using this system for is remote start? Do I need to splice into the OBD-2 port and if so why?

Red led flash 3x and no start. What am I missing?

Wed, 27 Nov 2019 16:45:25 +0000

2013 f150 evo-all installed with T-harness. The only conneciton i made myself was the keysense pruple/yellow on the t-harness to the yellow keysense on the 20pin connector.

Programmed for lock-unlock-lock. Blue LED flickers when i hit lock or unlock. and then the red led flashes 3 times and doesnt start. No other response or light on my truck. It still started fine with regular key. I also tried using just 3x lock in case but same problem.

What am I missing? I didnt make any other connections like the hood pin because it looks like they are optional.

Thanks.

2013 Sonata And EVO One

Tue, 26 Nov 2019 20:57:39 +0000

I have a new EVO ONE unit that I am able to put the firmware in and set the options with the Flash-Link 4 updater, but once that's done, I put the power plug in while holding the button, and the light comes on RED, and stays red. It won't change. It's almost like the unit is bricked or something. However it responds to the updater link tool. I'm at a loss. My evo all programmed just fine. However I was under the assumption that my Drone Mobile setup won't work with the Evo All. So I want to use the EVO one for that. Ideas?

traiblazer 2013

Mon, 25 Nov 2019 21:41:09 +0000

i need

INSTALLATION GUIDES

traiblazer 2013

to evo one plez

2013 Tacoma Evo one lights won't turn off after time out until doors are opened

Thu, 14 Nov 2019 07:07:25 +0000

Everything work except when remote starter times out the lights stay on and wind go off unless the door is opened

2013 Hyundai Santa Fe 2.0T, Push Start

Wed, 02 Oct 2019 20:15:18 +0000

Hi there, purchased used Santa Fe. Vehicle is equipped with E300 & EVO-ALL. Purchase of the vehicle did not come with Transmitter remotes. There is a FM antenna on the windshield. Safe to say there was a seperate remote other then OEM.

What replacement remote can I use? Or can I program current setup to OEM key? If not, can I replace it with new RF kit?

Thank you

2013 Prius C

Wed, 29 May 2019 10:06:52 +0000

Installed a remote start on a 2013 Prius vehicle starts and stops as it should from the key and the remote start but customer is saying there is now a hybrid error showing on the dash. There arent any check engine lights on just saying the hybrid system needs service. I called tech support and they suggested going to the dealer for service but the customer took it to a local service station who said the remote start is causing the problem. Has anyone else had this issue? i don't believe its from the remote start as I said it functions normally

meaning of stws connection for landcriuser 2013

Sun, 21 Apr 2019 16:33:01 +0000

What the meaning of stsw connection for landcriuser 2013 can you explain to me pls ?

Meaning of stsw connection for landcriuser 2013

Sun, 21 Apr 2019 16:31:26 +0000

What the meaning of stsw connection for landcriuser 2013 can you explain to me pls ?

2013 EQUINOX WILL NOT START

Fri, 15 Mar 2019 12:18:31 +0000

2013 Equinox will not start. EVO-ALL. did the press 5 times programming, unplugged, went to the computer and finished programming. installed back into vehicle. blue light flashes 3 times by pressing lock 3x's, red light comes on steady, blue light briefly comes on. red light flashes roughly 10-12 times. red light stays on, then goes off. yellow light comes on steady and stays on. while all of this is going on the door chimes, door locks, and radio all come on as if the car was going to start. almost forgot to mention i did get the car to start one time. however, it never worked again. service number is 001A06835311. back of unit also says evo ford, evo mazda pre-loaded. is it possible that i was sent the wrong kit? box says equinox on it.

do i need a flash link updater for the EVO-FORT2 installing on a 2013 Ford Fusion with 2 keys

Sat, 02 Mar 2019 11:40:12 +0000

i purchased an EVO-FORT2, and was under the impression that it came preloaded with the correct software for a 2013 Ford Fusion. i used the evo-all with thar-for2 guide and it learned both keys but then says to hook up to a computer with the flash link updater. my unit alternates between the yellow and red lights

2014 Honda Accord PTS Idle Mode

Mon, 25 Feb 2019 16:49:45 +0000

2014 Honda Accord Push to Start

Evo-One

Does this model support Idle Mode with or without an RF kit (using OEM fob?)

If so, how to use it?

Also, is there a list of all features the Evo-One is capable of vs what my vehicle can use?

what wires are needed to install in a 2013 audi s5 with pts. stand alone install..? installing the EVO-AUDT1

Sun, 10 Feb 2019 01:48:15 +0000

2013 audi s5 push to start, wires needed for stand alone install.

EVO-AUDT1

Unable to get past step 7 but step 7 works BLUE/RED LED on

Fri, 25 Jan 2019 08:19:45 +0000

Firmware is the latest all setting are as per the manual

2013 Honda Accord PTS - Cranks, but won't start.

Sat, 12 Jan 2019 20:32:23 +0000

SInce my last question wasn't answered by anybody, I'm hoping this one will get answered.

2013 Honda Accord PTS. I finally got around all my hiccups and managed to get the remote start to activate and crank, but it will not fire up the engine.

If the DCryptor process was ran once already, do I need to run it again?

And what settings are necessary to get it going, if I'm missing any?

factory alarm Problem with remote start

Sun, 06 Jan 2019 14:30:21 +0000

I have jeep grand cherokee 2013 (push to start) and install EVO-CHRT4 without the rf kit

when I trun remote start it was sounding horn and hazard lamp and not stopping

When trying to run the car with remotes, the alarm times work and the time does not work

Update my device to 74.29

Park lights and hood pin are not installed

Options:

C1

D1

D6

I hope to solve the problem

Best regard

2013 Honda Accord Push to Start - Cannot get past initial programming.

Thu, 03 Jan 2019 13:22:10 +0000

I'm looking for some help here. I recently purchased the Evo One with T-Harness for my 2013 Honda Accord with the Push to Start ignition.

I have verified that all my connections were made correctly with the T-Harness to the car and to the module itself.

I followed the instructions and waited for the Red and Blue LEDs to be solid before letting go of the programming button. They stay solid. I connected the 20-pin connector, then the white connector to the other side of the module, then the red one last. When I press the button 3 times according to the instructions, I get no response from the unit itself, the LEDs stay solid and do not blink, therefore I cannot continue any further to program the module to my car. I have tried reconnecting the harnesses at least 5 times with no success, making sure that the connections are solid.

Key id incorrect 2013 Nissan pathfinder

Mon, 31 Dec 2018 14:58:14 +0000

EVO ALL module, says EVO-NIST4 on the box. Completed install using t harnesses, and programmed with flash link.

3x lock activates ignition and lights. Yellow led iluminates on module. Dash displays "key id incorrect" then "4wd fault"

no crank. no brake lights. Ignigtion stays on untill module is unplugged and will not respond to the keey comand to terminate.

Fortin unit blinking red - Mazda CX-5 THAR-MAZ1

Sun, 16 Dec 2018 17:55:57 +0000

2013 CX-5, no OEM alarm, automatic

After completing the entire process I can't start it (OEM key, hit lock 3x). So I tried the process again and no dice.

Q1: After step 12 I get red blinking light. Doesn't go out until I pull the power to it. What now?

Q2: From the fuse box - is the connection from ground on 11-pin conn to pin11 on 18-pin conn REQUIRED?

Can RF kit be used with EVOALL on 2013 Kia Optima Std Key?

Wed, 24 Oct 2018 12:45:27 +0000

Under "required technology" RF kit is on EVO ONE but not EVO ALL. Does that mean a RF kit can't be used on my 2013 Kia optima that uses standard key?

Can I install remote starter with manual transmission 2013 Jetta No Keyless Entry

Mon, 17 Sep 2018 01:52:38 +0000

Can I install remote starter with manual transmission 2013 Jetta, it has No Keyless Entry

2013 F150 w/ factory remote start. Wanting to add SmartStart with existing EVO

Sun, 12 Aug 2018 23:21:19 +0000

Remote start question...

Currently using the Fortin remote start with a Viper SmartStart module. However, considering swapping over to the FORD remote start to gain the use of the climate control features that it brings...

Don’t want to use the Ford version of Smart Start.

Anyone know if you can use the SmartStart module from Viper with the OEM remote start by Ford? Could the EVO be used as a bypass? Or connected to the OEM remote start. Would this work by disabling the EVO remote start and allowing it to work with just using the “OEM remote monitoring”?

Haven’t really had much luck digging on the net for the answer.

I was able to turn all the menus on, activate OEM remote start, etc as a check in advance of buying the ford module. I had previously successfully swapped the LCD cluster into my truck.

Details....

-2013 F150 STX 5.0 SC

-OEM remote start w/ Viper VSM300

-using Fortin EVO As remote start moment.

evo one in kia rio 2013

Tue, 06 Mar 2018 15:52:42 +0000

Something happened to my evo one...before everything work well..my children play with the key and the brake pedal after that the rf kit not working... When I try to program it no responce

i program again the evo one with my car till the blue led flashes rapidly

but i cant program the excalibur rf51-edp like before

also i noticed that when i program the evo one the park lights not flashing like before during programming with the rf kit

at this step the park light not flash to confirm like before

please help me

Help me please in evo one with kia rio 2013

Mon, 05 Mar 2018 10:10:44 +0000

please help me in evo one

Thu, 01 Mar 2018 09:44:44 +0000

hello

i have evo one in my kia rio 2013

work with excalibur rf51 edp kit

from 4days somthing went wrong and not working

how can i reset defaults in evo one

i dont have the programmer tool

thanks

2013 F150 - EvoAll erased my 2 factory programmed keys

Fri, 19 Jan 2018 17:22:07 +0000

After I reflashed my unit I went to install to see if programming would work this time (several failed attempts prior to flashing). In the process I plugged the black 4-prong connector into the unit while holding the programming button down and released when LEDs were Red and Blue. Stupidly I then forgot to plug in the rest of the connectors before proceeding to programming. After cycling the two factory keys and waiting 3 seconds on each as the instructions say, the locks cycled and nothing happened (as expected with the other connectors not plugged in). HOWEVER, when I went to start the truck after unplugging the bypass module, the truck no longer starts. Neither key works now. They will lock/unlock the doors but turning the ignition does nothing. I realize my mistake in programming, but is there any way to reprogram the keys??? Or am I now stuck with a truck that has no remaining programmed keys that will start the vehicle let alone program anything whatsoever???

Why does a yellow light come on at the end of the programming?

Mon, 08 Jan 2018 16:29:09 +0000

WhenI’m programming the red and blue lights flash as they’re supposed to be in the blue lights flash rapidly why does a yellow light come on at the end. And it still will not start my vehicle. What do I need to do?

programming of excalibur rf51 with evo one in kia rio 2013

Tue, 02 Jan 2018 11:24:03 +0000

hello

i didnot understand the steps to program the rf kit with the evo one

what is the meaning of :

If you want to change EVO-ONE options, use the following button mapping

in which step i do it

please illustrate to me

excalibur rf-51 with evo one in kia rio 2013

Tue, 02 Jan 2018 10:58:09 +0000

hello

how can i make excalibur rf kit work keyless entry with evo onw

i mean when i become near to the car the door unlock and when iam away the door lock