Questions & Answers - Questions récentes tagguées 2019

I’m looking for a t harness for a 2019 Subaru brz push start

Mon, 11 May 2026 14:00:01 +0000

T harness for Subaru brz

GMC TERRAIN 2019

Mon, 23 Jun 2025 09:01:59 +0000

HI plaese any help i fix evo all with gmt6 harnes for gmc terrain 2019 i have 2 keys oem already only 1 key its working for remote starting but the second key its working fine on the car but the starting remote not working any solution to make both keys working thanks for all

Which T-Harness do I need for a Volkswagen Arteon 2019?

Tue, 31 Dec 2024 07:46:37 +0000

There are multiple choices for Volkswagen. Which is the correct harness for my car?

Volkswagen Arteon R-Line tsi 4motion S-A DSG Automatic

Manufacture date: 14 May 2019

Thanks

Where do i find insaltion diagram for f350 diesel 2019

Mon, 16 Dec 2024 15:45:39 +0000

Acesess insturtions instaltion

2019 Toyota Rav4 Push Start

Sun, 15 Sep 2024 22:02:28 +0000

Hello. I am trying to program this myself after spending a lot of time and money over the years getting it reprogrammed as it seems to lose memory when major service is done. I assume that is likely a Toyota issue that can't be helped.

I have about 6 to 8 hours in trying to make this work with little success but am concerned about all the wear and tear on the clips and wires from taking it in and out trying to get it to work so its time to ask for help.

Perhaps verifying which manual is it that I should be using please and thanks. The instructions seems simple but I am missing something. I did just notice that all the instructions mentioned modules made after 2019 and over while mine is 2016 despite my Rav being a 2019. Was it obsolete when installed or is that irrelevant?

#001A06 654416

The instructions that show up when trying to program this is Guide 83841 but i have been looking at many others trying to get it to work.

thanks

THAR-AUD2 & Evo-All, How to Program

Fri, 29 Dec 2023 04:17:18 +0000

I just want to use the remote start function of lock button*3.
I have an Evo-All module and a Thar-Aud2 harness.
I connected this harness to the cable in the trunk side while looking at the installation manual, and I connected the extra remote control key.
And I connected the black connector while pressing the module's program button, but the lights on the all LED are flashing blue, red, and green. It's the same when I take my hands off.

Even if I reconnect all the connectors, the same thing happens.
The program doesn't work at all. What's the problem?
Do I not have to use a black connector to just use the lock button*3?

Please help me

What parts to need need for a keyed no remote 2019 F150 to remote start with my phnoe without cutting any OEM wiring?

Fri, 15 Dec 2023 14:17:48 +0000

2019 F150, Keyed. No remotes. Just want remote start from phone or from a supplied remote. Do not want to cut any of the OEM wiring.

2019 FUSION

Fri, 01 Dec 2023 08:26:37 +0000

There was a broken wire in the underwing connector going to the underhood button. We fixed it and the remote start worked. Thanks for support.

2019 Veloster PTS Manual, Bypass wont program

Mon, 30 Oct 2023 21:38:14 +0000

2019 Veloster PTS Manual. Wire to wire according to https://fortin.ca/download/98741/EVO-ONE_IG_RTO_BI_KHY8-VELOSTER_2019_PTS_B_98741.pdf

Bypass wont program when ignition is pressed twice.

Any advice on troubleshooting would be greatly appreciated.

2019 HR-V

Tue, 04 Jul 2023 15:42:04 +0000

Hello. I installed evo-one(002B04337437) on 2019 HR-V(key). The starter turns, but the engine does not start. If I bring the key closer to the ignition, then it starts.

2019 Veloster PTS Manual 3x Lock Evo One

Tue, 13 Dec 2022 20:58:24 +0000

Getting conflicting information from local installers. Would prefer not to have an extra remote but if need be I will purchase one. 2019 Hyundai Veloster Push to start Manual.Looking at installing an Evo-one Will the 3x lock start work? Can I set the ready mode without another remote? Any help appreciated

2019 Mazda 6 not starting after successful programming with evo all

Mon, 10 Oct 2022 23:44:27 +0000

Hey everyone,

I'm trying to install an EVO-ALL in standalone mode on a 2019 Mazda 6 with a T-Harness.

I initially successfully programmed the module with the two keys, and then successfully completed the CAN procedure as well. Unfortunately I could not get it to start, the module would have the red and orange lights on but would make no effort to crank the car.

I tried starting over by resetting the module, and now whenever I repeat the programming process I see a flashing red light, which supposedly means that the keys are already linked to the unit. Doing the CAN procedure now also results in all 3 lights cycling instead of the single blue light going off. Simply plugging the module in results in all 3 lights flashing.

I'm not entirely sure where to go from here. I'd like to start over but I'm not sure how to do that.

US vs CA Model?

Sat, 19 Feb 2022 13:08:29 +0000

2019 Honda Pilot PTS EVO-ONE THAR-HON8 T Harness Install with takeover. Telling me to plug the grey 12 pin connector on the T Harness to Plug that is located at steering lock module under steering column. I looked this up and only the CA and Mexican built versions of the pilot have this Steering lock module installed. This is not on my Pilot. Can I get a picture of where I am supposed to plug this in if I dont have that module under my steering wheel as I cant find it for the life of me.Im assuming that with the wire thats coming from the EVO-ONE saying its a bypass and it being connected to a steering lock module on the other model, maybe some sort of immobelizer or something? Any help would be super appreciated! Thanks in advance!

How do I remove Fortin EVO-ONE, 2019 Mazda 6

Wed, 26 Jan 2022 11:35:00 +0000

My question is how can I remove the EVO-ONE with THAR-ONE-MAZ3 from 2019 Mazda 6 safely and take the car back to factory setup?

I looked everywhere to find a guide or video illustrate such a thing but I couldn't find one ):

Help please!

2019 4Runner alarm going off during remote start

Tue, 28 Dec 2021 17:41:24 +0000

Installed the EVO-ONE/TOY-9/RFK441 into a 2019 standard key 4Runner. Not every start, but most starts are followed by the alarm going off. It's keeping the customer from using the starter out of anxiety. Any ideas? Did I program the EVO wrong? Did I program the RFK441 remotes wrong?

2019 lc150 turbo timer

Fri, 12 Nov 2021 12:36:46 +0000

Is it possible to implement a turbo timer for 2019 LC150? I want to install evo-all (stand alone) on it.

do you need to reprogram after new keys

Fri, 05 Nov 2021 20:10:09 +0000

lost my key and had to get both of my keys reprogrammed at the garage. now after 3 beeps the process initiates but truck doesnt start. 2019 ram 1500 classic turn key diesel

'19 Ram promaster

Sun, 24 Oct 2021 23:10:09 +0000

Hello, I am looking to get remote start only for my '19 Ram 1500 promaster. It does not have remote start or alarm now. It uses a standard turn key. According to the website it says I can use the EVO-ONE. Looking at the install instructions on page 5, it shows what looks to be a remote starter module of some sort?

Am I looking at the right instructions for this setup?

If so, do I need another part?

Also, is there a t-harness made for this yet?

Thanks!

no start intermittent

Wed, 01 Sep 2021 15:02:36 +0000

truck will not start with oem key fob. all electrical components non functional in truck. requires disconnecting battery to get truck to function again

Guide 93711 2019 Toyota Rav4 Hybrid--is option D4 required (hybrid mode)?

Tue, 27 Apr 2021 21:07:17 +0000

Install guide doesn't mention enabling option D4 for Hybrid mode, although the guide is specific for Hybrid. Is this an oversight, or is it not required for this vehicle?

THAR-ONE-SUB2 & EVO ONE on 2020 Subaru WRX PTS

Sun, 14 Mar 2021 00:31:28 +0000

I have installed the THAR-ONE-SUB2 in my US WRX per the instruction guide, page page 7/11 T-Harness - Automatic & Manual Transmission
https://cdn02.fortin.ca/download/98951/evo-one_ig_rto_bi_sub2_wrx_2019_pts_b_98951.pdf

ASK:
1.) Why is the car not starting with the Yellow/Red and Yellow/Green separeted per the installation guide
2.) Does my US WRX have to follow the Canadian Vehicle steps, if yes why and if no what is the difference

Installation was simple as mainly 2 connectors and areplug N play. I master reset my Evo One, flashed the 2020 WRX firmware and follow the programming steps on page 8/11. When I get to step 5 to start the car, the car starts and shuts off immidiately, eventually not even turning the starter. The lights on the Evo One stay solid for Red and Blue and programming does not complete to follow up on the Dcryptor part. After a little troubleshooting I found that I can get the car to start if I reconnect the Yellow/Red and Yellow/Green wires I cut eariler making the car at least drivable again.

2019 RAV4: EVO-ONE + THAR-ONE-TOY12 Doors remain unlocked During Remote Start Session.

Fri, 12 Mar 2021 17:52:56 +0000

2019 RAV4: EVO-ONE + THAR-ONE-TOY12 harness setup;

All the doors unlock then the vehicle starts fine but the doors remain unlocked during remote start session.

A/C don’t work cool

Sun, 28 Feb 2021 17:33:45 +0000

when I start the engine by lock lock lock the air conditioning does not work only work the blower but not cold if I push the start stop bottom yes work fine is a 2019 Nissan Titan sv rwd 5.6L gasoline

Golf 2019 window problem

Sun, 21 Feb 2021 12:26:03 +0000

Hey guys, problem that I'm having is that customer window won't work after the takeover, we have to cycle key to off , shut the engine, put ignition back on and now the windows will work.

something you have already experienced ?

Golf 2019 std key , window problem

Sun, 21 Feb 2021 12:21:13 +0000

Does evo all have to be setup for 3x lock for mycar module to work?

Wed, 27 Jan 2021 07:52:48 +0000

Looking to get Mycar module. I have a 2019 explorer with evo all standalone fort3 harness. I set it up using lock/unlock/lock to remote start. Mycar directions is showing 3x lock for install. Will it work using my configuration? If I have to, I will disable horn honk with lock press with forscan, but I would rather not if possible.

Conseil Mazda-3 2019

Tue, 26 Jan 2021 18:59:42 +0000

Petit conseil à vous tous, lorsque vous installerez un démarreur sur un Mazda-3 ou mazda-CX30 2019 et+, la première étape que vous devez faire en entrant l'auto en atelier est de la brancher sur un chargeur immédiatement.Depuis quelques semaine je travails sur un mazda-3 2019 et j'ai finalementi due me rendre chez le concessionaire afin de faire effacer des codes en mémoire dans l'ordinateur. Ils mont confirmer que c'est ce que font tout leur technicien lorsqu'ils entrent une voiture pour autre chose qu'un changement d'huile. Bref, 3 heures de mise à jour dans la voiture, les codes sont effacé et mon problème du départ résolu ( Vérifié système airbag qui allume lorsque l'auto est démarré avec le démarreur mais aucuns code lorsque démarrer normalement ) Se sont des tab.... de code caché donc il faut absolument le scantool pour les effacer et il ne suffi que de 10 minutes la portière ouverte pour que la batterie tombe faible et que le bcm crée des codes. Je vous confirme que les gars au services sont déjà découragé des clients qui ne font que quelques km par semaine pour allé à l'épicerie l'hiver, eux ils vont avoir de sérieux problèmes de batterie

EVO ALL won't recognize keys on 2019 Ford Explorer during programming

Fri, 15 Jan 2021 10:19:23 +0000

Evo all standalone wire to wire with t-harness firmware 71.52(i have also tried 71.49, 4.01, 7.47, and programming related to listed firmwares) I am trying to do 2 key programming. When I get to the step of holding(the folded key) to the ignition, press the button on EVO, nothing happens. Nothing progresses. Any ideas for where I need to look? CAN bus is wired and voltage tested good. Wires were stripped, wrapped, and taped. Module does seem to communicate with vehicle with key fob sending lock/unlock(blue LED lights up) functions, then doing the lock/unlock/lock, it flashes 5 times RED which i know means hood open. Not sure why as the toggle switch has a good ground and is turned off. The toggle is wired into the dark blue A8 wire on the 20 pin connector. Please advise

Stops unless I hit push to start button twice

Mon, 11 Jan 2021 18:27:49 +0000

2019 Dodge Ram Tradesman 1500, new style, 5.7L, auto, Tip start, . Evo One w/THAR6 harness.Using factory lock/unlock/alarm remote, 3X lock to start then unlock to enter the truck.All soldered and heat shrunk connections.

Installed back in June, worked great until last week. Starting one week ago, would shut off when I hit the brake even tho I pushed the start button before touching the brake.

By accident I found out if I pushed the start button twice before hitting the brake, it would keep running as it had been doing the previous 6 months, what could have changed?...........Mike

**EDIT*

Now a few weeks later, it won't keep running even when I hit it twice, stops immediately when I hit the brake....any ideas?........Mike

2019 veloster push to start not working

Sun, 10 Jan 2021 17:22:31 +0000

I just installed the Evo-One with the T harness. I programed the Evo and the started the car. Followed the reservation mode and the hit the push to start button and the car shuts off! I notice that when the car is on the Evo-One only shows a orange/yellow light, that's it. Please help.

What wire to use evo one to connect to clutch bypass. 2019 veloster n push to start

Sun, 20 Dec 2020 09:08:19 +0000

Clutch switch has a white, red and 2 black wires on it.

EVO-ALL-411 VS EVO-ONE-411

Wed, 16 Dec 2020 16:53:48 +0000

I WOULD LIKE TO KNOW THE EVO-ALL-411 VS EVO-ONE-411 COMPARISON

According to the site, the 2 are compatible on a TOYOTA COROLLA 2019 HACHBACK, PUSH TO START

Apart from the price what are the advantages / disadvantages between the 2 ???

J'AIMERAIS CONNAITRE LE COMPARATIF EVO-ALL-411 VS EVO-ONE-411

Selon le site, les 2 sont compatibles sur une TOYOTA COROLLA 2019 HACHBACK, PUSH TO START

A part le prix quels sont les avantages / inconvénient entre les 2 ???

no start 2019 Sentra push button light brake light come on

Thu, 26 Nov 2020 15:02:40 +0000

no start 2019 Sentra push button light, brake light come on, it starts pushing button, when not hitting brake pedal

Mazda 6 2019 Front Radar Sensor Malfunction

Wed, 11 Nov 2020 08:25:36 +0000

After installing the EVO ONE with THAR-ONE-MAZ3 everything seemed to be working, but now(4 days later) whenever I start the engine with the remote starter I get the folowing warning "Front Radar Sensor System Malfunction" and the only way that I know how to make it dissapear is to turn off the engine and turn it back on from the push to start button. Is there any other solution to this problem?

Mazda 6 2019 window will not open automatically

Tue, 10 Nov 2020 10:12:09 +0000

After installing the EVO ONE with THAR-ONE-MAZ3 I've seen that the front windows don't open with only one press of a button. I have to hold the button pressed until the window is open to the desired position. Why would that happen? Is there a parameter in the software that needs to be changed?

2019 Silverardo 3500 Alarm Questions

Mon, 31 Aug 2020 20:01:35 +0000

Hello I have a 2019 Silverado 3500 diesel and was wondering how to setup the evo all alarm. This is the WT model so it doesn't have the factory alarm enabled. I have the evo all module with the gm7 t-harnes and the remote start works well. I use the oem remote and didn't do any other hard wiring. I'm not sure if I need to hard wire something or if I have something wrong in the settings. My S/N is 001A07 129104

where is the steering lock module for the us ver. Indiana 2019 crv push to start?

Wed, 29 Jul 2020 16:16:38 +0000

Can't find the steering lock module in the US made 2019 Honda crv push to start Evo one. any help?

2019 RAV4: EVO-ONE + THAR-ONE-TOY12 INSTALLATION

Sun, 12 Jul 2020 19:17:15 +0000

Hi.

I'm using the following guide

evo-one_ig_rto_bi_toy12-rav4_2019_hkey_a_93691

and following DCRYPTOR PROGRAMMING PROCEDURE my EVO-ONE doesn't respond for step 5 (Start the vehicle.  The BLUE LED will turn OFF.  The RED LED will turn ON.) it doesn't switch to Red.

Please assist.

Thank you.

GUIDE # 93691

REV.: 20200622

Request: Pin or socket photos of THAR TOY-13

Sun, 12 Jul 2020 15:14:07 +0000

I'm installing an EVO-ALL into a 2019 Corolla Hatchback using a TOY-13 harness. The harness is labeled TY70, and the connections to the factory ECU harness in the driver-side floorboard have different plug shapes.

If someone has a THAR TOY-13 and can take a photo of harness connectors that plug in between the blue and white/gray sockets, I would appreciate it. Either the box I received was mislabeled, or Fortin's website is wrong.

(post as answer with photos or links to photo hosting site, please)

Thank you!

2019 lexus NX300

Mon, 15 Jun 2020 14:35:14 +0000

The instructions for 2018 and 2019 Lexus Nx300 are the same, right?

the all evo dont work in ram 2019 1500 diesel

Sat, 23 May 2020 16:41:04 +0000

please help installion for evo all for my ram 1500 2019 diesel, button start, i probe all in nothing, not work, thank, the remote control only two button, LOCK and UNLOCK.

2019 savana powerlock control off evo all

Tue, 14 Apr 2020 09:54:56 +0000

Will the evo all control the factory door locks on a 2019 gmc savana van through its canbus wires or do i need to make connections from the alarm/start module directly to the bcm?

2019 camry

Sat, 11 Apr 2020 11:55:32 +0000

For 2019 and 2020 Camry, is the instruction from 2018 Camry suitable?

both ble and red lights stay on in step 5

Sun, 23 Feb 2020 17:26:30 +0000

i cant make it passed step 5 for my subaru impreza 2019. the lights stay solidly illuminated and dont let me process any further. i have checked all connections and everything is correctly put together.

what install guide for 2019 Silverado 2500?

Wed, 12 Feb 2020 21:59:28 +0000

I have a EVO GMT5 ,the application chart shows this to be correct for a 2019 2500 Silverado,but under the install guide it only lists up to 2018.Is the install the same as 2018 or is there a updated one for 2019?

2019 benz sprinter evo one . wheres the parking lights ?

Thu, 09 Jan 2020 16:06:28 +0000

trying to do a alarm only on oem remote just need parking light colors and locations

park lights 2019 f250

Tue, 07 Jan 2020 10:00:27 +0000

on the 2019 f250 it says to interupt pin 4 (ground) with the yellow and red and yellow and green wires from evo all and to splice into pin 11 (park light) circuit. after doing this during programming it seemed to blow ign fuse 18 5a. part 2 of this question. the remote start is a pro start (supplied by customer) and we are using the ford t harness is the pro start a data link or direct link compatible remote start or does the evo all need to be hard wired ?

cause of red light to imediatly to come on stay on when 4 pin connetor plugged in.

Wed, 01 Jan 2020 09:31:49 +0000

as soon as the 4 pin connector is plugged in with the button pressed in to the evo -all the red light comes on and stays on. When starting the programing prossses accidentlly released the button on red.

2019 RAM 2500 Push to start GAS blue light goes out after plugging in the 20 pin con (step 3)

Thu, 26 Dec 2019 15:59:17 +0000

2019 RAM 2500 Push to Start GAS

(What I wired)

THAR-CHR6 Harness: I wired from the EVO ALL A1 to the purple and white on the Igintion BCM module. A10 to Lt.Blue of T harness, A20 to the Lt.Blue/Black of T harness, with an OHM meter I ringed them out (they are connected). I tied the red connector D3 & D1 together and soldeir together at the T harness as discribed. Can 1 LOW connection C4 from the EVO to the Yellow of CAN 1 connector on the truck. Can 1 High connection C3 from the EVO to the Brown and White of CAN 1 connector on the truck.

(plugged it the remaining plugs by the steps discribed into the EVO ALL)

Issue I have: I go though steps 1 & 2, however when I plug the 20 pin connector in the light the blue light goes out. (no lights are on).

I updated and flashed the EVO to Firmware 74.[38] Hardware inside 7.0 however, the the orange box says Recimmended firmware is not loaded 63.[02] then there is a green Update to that version aside it.

What can my issue be. Thank in advance for any help!

Which Ford firmware for 1 Key programming?

Wed, 25 Dec 2019 07:11:37 +0000

2019 Ford F450 Diesel: EVO-FORT3, 1 Key programming: Manual indicates Firmware version 4.01 "only" but after flashing for 4.01 it states "recommended firmware is not loaded" and indicates 71.49. Which is correct? Thank you.