Questions & Answers - Questions récentes tagguées 4

Can you connect a 4 pin Shock/tilt sensor to the evo-one?

Sun, 06 Apr 2025 02:27:48 +0000

First tech Shock/tilt sensor is a 4 pin but the Evo-one is 3 pin, Is there any other way or is there a 4 pin to 3 pin adapter? Im fine with just power, ground, trigger, I don't need the warning persay

Why does it only honk now when I remote start

Thu, 29 Jun 2023 01:38:34 +0000

Installed evo all with my car telematics with 944 rf kit and has worked beautifully since 2019 with the occasional horn honking when I remote start but I had to remove module and wiring from dash for some audio upgrades now all it does is honk the horn when I try to remote start. Does not try to crank everything powers up as it should then nothing. Thats on first attempt 2nd attempt does even do that. I have since go in and tried to reprogram module as t

Evo start 2 no service after switching from iPhone to Samsung s21

Tue, 22 Feb 2022 21:18:00 +0000

Customer switched from iPhone to Samsung S21 And now cannot login and it says the service is Unfortunately not available, it should be up shortly

evo all with toy 13 harness and evo start 2

2020 rav 4 push start

Starter has worked prefect for 2 years-suddenly Tail light /marker lights will not turn off; Remote start not working

Mon, 13 Dec 2021 10:52:05 +0000

2013 rav 4. Evo one. Using oem Hkey 3 lock to start

How to program Revo 4.1 to the Evo-One?

Wed, 04 Aug 2021 18:49:09 +0000

I have purchased the Revo 4.1 rf kit to go with the EVO-ONE. I went to program EVO-ONE with the Flash-Link 4 prior to receiving it. So I am ready to go when it arives. There is no option to select the Revo 4.1 rf kit. There is only the smartphone and Forin rf kit choices, or no rf kit. How do I select the Revo 4.1 rf kit ro program with the EVO-ONE?

2013 Toyota Corolla Evo-All stuck on step 5 in programming procedure

Tue, 21 Jan 2020 17:10:12 +0000

Hi, I installed a remote start on a 2013 Toyota Corolla that uses the Evo-All bypass module. I am currently stuck on step 5 of the programming procedure on page 3. When I turn the key to the on position the blue and red led light from the previous step turn off and nothing happens. I checked all the wiring going to the ODBll with a multimeter and everything seems fine. The remote start does crank over the engine but will not start unless the key is close to the ignition. Does anybody have any suggestions?

How to find toggle switch in flash link manager 4

Wed, 13 Nov 2019 09:52:22 +0000

How to find toggle switch in flash link manager 4

FLASH-LINK MANAGER 4.51

Thu, 07 Nov 2019 06:41:17 +0000

Good afternoon, I downloaded the latest version of FLASH LINK MANAGER 4.51, the program opens but it does not start, it is constantly loading. What could be the problem?

2009 G37 EVO ALL NOT WORKING AFTER FLASH

Sat, 09 Feb 2019 19:35:32 +0000

1) I Installed EVO All and Tharness (programmed EVO while hooked up to harness in car > Evo lit up blue when pushing lock but car would not start using oem remote. (Learned I needed flashlink)

2) Bought flashlink 4 and updated and flashed EVO All

3) Reinstalled EVO All and ZERO lghts came on and car did not start

I followed recommended settings:

A1-11 ALL ON

B2 OFF

C1 & D1 ON

D2 ON

After flashing the EVO I depressed the program button and no lights come on. I plugged it back into the wiring harness and again, no lights. Before I flashed it the red light would come on while depressing the button...what could have happened?

FRUSTRATED!!!

Configurer FlashLink 4

Fri, 28 Sep 2018 21:00:25 +0000

Bonjour,

Comment activer la option Fortin2 dans la nouvelle version de FlashLink pour pouvoir utiliser une télécommande de REVO-1 de cgez Crimestopper avec un EVO-ONE?

Rav 4 2017 probleme quand j etain le moteur avec la manette

Sat, 15 Sep 2018 15:39:28 +0000

Pourquoi quand j étain un rav 4 2017 avec la manette du demarreur le module simule une sortie de la porte passager et cela ne fait pas éteindre mes lumière automatique seulement la porte conducteur le.fait mon installation est fait avec t connector et evo one, si je ne met pas les lumière exterieur à auto c est ok, y a t il moyen de modifier la.programmation du evo one pour quand jarrete le.moteur avec la manette qu il simule une sortie de la porte conducteur pour faire etendre les lumière automatique merci

2012 Toyota 4Runner LTD PTS wire color & location

Sat, 25 Feb 2017 13:20:15 +0000

I am having a hard time identifying the correct plug/connector with wires to tap into, for an EVO-All installation. I suspect the information provided in WireColor is for other T4R models ( without Push to start[PTS]) because all pictures are from the passenger side , under glove compartment while the guides (29991 & 16221/12971) are pointing to driver's side ( kick panel/steering wheel/ECU body). The wire colors don't seem to match actual wires... or it could be I can't ID the correct plug.

It looks like I can't add pictures so I am including a link to a thread with actual pics of this car with plugs labeled....I am hoping someone can help identify the correct plug for IGNITION 1 & 2, STARTER 1 & 2, ACCESSORIES 1& 2 , A10, A20,A14.

actual vehicle pictures

Note: I can provide better pics if needed.

Thanks in advance!