/en/qa/tag/6speed Powered by Question2Answer /en/qa/86848/evo-one-install-infiniti-2008-g37-speed-manual-but-only-lock-and-unlock-work-remote-start-does-work Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result.  I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2)  but have the same result.  I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated. Infiniti /en/qa/86848/evo-one-install-infiniti-2008-g37-speed-manual-but-only-lock-and-unlock-work-remote-start-does-work Wed, 13 Mar 2019 19:00:04 +0000