Questions & Answers - Questions récentes tagguées 80-bit

2005 Ford Explorer with only 1 Standard 80 bit key

Mon, 29 Oct 2018 10:20:30 +0000

Hi I know when you filter remote start solutions for 2005 Ford Explorer Std Key, it says 2 keys required for programming but when you go into guide I see options for 1 key under same year. Customer only has 1 key so I wanted to know if you there is a solution for owner?

Specifically, what issues will wire taps cause on tx rx wires?

Tue, 13 Oct 2015 22:16:54 +0000

They may be the last hope as to why my 80 bit will not program evo ride.

evo ride will not complete program

Fri, 30 Jan 2015 13:47:11 +0000

The evo ride is connected to an 80bit key 2013 F150 ford (verified with voltage test) Module goes through all the programing/ blinking with the two keys. When i activate the remote starter to complete the programing the module led stays red and does not blink. The module label states it has firmware 2.xx.

What do I use for a 2011 Mustang with an SA key?

Mon, 05 Jan 2015 17:00:14 +0000

I have a customer with a 2011 Mustang that has an SA key. All the solutions I see are for 40-bit. My understanding is that SA indicates an 80-but. Is there a different solution for 80-bit Mustangs?

Bypass for 2011 Ford Ranger, 80-Bit

Wed, 10 Dec 2014 14:29:15 +0000

I'm working with a customer who has a 2011 Ranger with the 80-bit key. EVO-RIDE only lists 40-bit in the compatibility chart. EVO-ALL sas it's compatible with that vehicle, but makes no mention of either key type in the compatibility chart.

So....Which is the right module to use for a 2011 Ranger 80-bit?

Thanks!

2012 ford flex wont program

Thu, 16 Oct 2014 09:54:56 +0000

I have a 2012 Ford flex. 80 bit SA keys. service # 001a06251596. Running t harness in standalone mode.

When I start the program process, I get the confirmation in step 4. However, when I get to step 14 the red and blue stay illuminated. At this point, if I start the vehicle with the key and turn it off, it will stay running. It will not shut off with the foot brake, It will only shut off if I unplug the evo-all.

FAQ - EVO-RIDE will not program with Ford 80-bit SA stamped key.

Wed, 20 Aug 2014 15:04:47 +0000

Symptom: The EVO-RIDE will not program with a Ford 80-bit SA stamped key.

Cause A: The EVO-RIDE has an older firmware version that does not recognize the key.
Solution A: Update the EVO-RIDE to firmware version 1.03 (or newer) with the FLASH-LINK UPDATER and program the module.

Cause B: Even though the key is 80-bit the vehicle may not be equipped with 80-bit encryption. On 80-bit systems the immobilizer power wire at pin #1 of the immobilizer connector has +12VDC when the key is inserted. On 40-bit systems the immobilizer power wire only has +12VDC with ignition.
Solution B: If the vehicle is a 40-bit system - Download the latest EVO-RIDE installation guide and follow programming procedure #2.

Cause C: The Yellow (Immobilizer Power) wire of the EVO-RIDE is connected to the vehicle's ignition and not connected to pin #1 of the immobilizer connector.
Solution C: Connect the Yellow wire of the EVO-RIDE to pin #1 of the immobilizer connector.

EVO-Ford Applications

Sat, 21 Dec 2013 16:58:20 +0000

On the EVO-Ford, can it be used on other 40 bit cars with the same ignition plug and Can BUS, such as a 2006 Explorer, or 2006 Fusion, 2008 Escape?

I see it works on a 2008 Taurus. Just wondering if it will work on others that old.