<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
<channel>
<title>Questions &amp; Answers - Questions récentes tagguées 942</title>
<link>/en/qa/tag/942</link>
<description>Powered by Question2Answer</description>
<item>
<title>Remote start not working on evo one with THAR-ONE-HON5 T harness and 942rf kit</title>
<link>/en/qa/137068/remote-start-not-working-on-evo-one-with-thar-one-hon5-t-harness-and-942rf-kit</link>
<description>I initially was able to successfully connect my EVO one to my 2009 honda accord with the HON5 T harness. The OEM key fob worked fine starting the car (I programmed it to lock, unlock, and lock), then I went to install and pair the 942 RF kit. After pairing the 2 remotes, it was able to lock and unlock the car just fine, but when I pressed the (+) button twice to check the status of the car, it gave me the wrong status beeps (it was telling me the car was unlocked when it was actually locked). Next I tried remote starting from the 942 remotes and it wouldn&amp;#039;t start, it would give me the green confirmation saying that it started, and then later beep/flash red that it failed to start 3 seconds later. Then i tried using the OEM fob to start (which previously worked) but didn&amp;#039;t work as well. &lt;br /&gt;
&lt;br /&gt;
Both the module and antenna are up to date. I tried fixing it by reflashing the evo one with the same settings I used in the beginning, and reconnected it to the car. I made sure all the connections were intact (including ground), and even tried reprogramming the module to the car, which seemed to be successful according to the light sequences outlined in the installation guide. Still not working after this. I also tried the master reset (&lt;a href=&quot;https://12voltdoesit.com/uploads/docs/Fortin/EVO-ONEMasterReset.pdf&quot; rel=&quot;nofollow&quot;&gt;https://12voltdoesit.com/uploads/docs/Fortin/EVO-ONEMasterReset.pdf&lt;/a&gt; - *I used the bypass side*), which didn&amp;#039;t do anything. I removed all the connections for now while trying to resolve the issue. &lt;br /&gt;
&lt;br /&gt;
S/N: 002B04 747360</description>
<category>Honda</category>
<guid isPermaLink="true">/en/qa/137068/remote-start-not-working-on-evo-one-with-thar-one-hon5-t-harness-and-942rf-kit</guid>
<pubDate>Thu, 04 Dec 2025 05:42:02 +0000</pubDate>
</item>
<item>
<title>How to set EVO ONE RFK942 on Honda CRV 2015 SE ?</title>
<link>/en/qa/107000/how-to-set-evo-one-rfk942-on-honda-crv-2015-se</link>
<description>Evo One with T-harness-HON3 has been installed on a Honda CRV 2015 SE automatic push to start.&lt;br /&gt;
&lt;br /&gt;
The module has been flashed using the wizard: Honda CRV 2015 automatic,, push-to-start, has OEM alarm, Remote Starter only, RFK942 kit, T-HARNESS-HON3, 3x lock, then Red and Blue programming, and Dcryptor.&lt;br /&gt;
&lt;br /&gt;
The yellow light on the module turns on, and 3x lock button is working fine. This setting suffices for OEM remote car starting, the only issue is that 100 feet range is too short.&lt;br /&gt;
&lt;br /&gt;
I cannot pair the RFK942 kit at all, the blue led on antenna is not on, the 4x brake push does not work, the wallet button does nothing even it is plugged in. &amp;nbsp;&lt;br /&gt;
&lt;br /&gt;
I need some help, please! Can be a programming issue or EVO-ONE/RF kit is not working properly?&lt;br /&gt;
&lt;br /&gt;
Thanks,</description>
<category>Honda</category>
<guid isPermaLink="true">/en/qa/107000/how-to-set-evo-one-rfk942-on-honda-crv-2015-se</guid>
<pubDate>Sun, 28 Nov 2021 10:13:33 +0000</pubDate>
</item>
</channel>
</rss>