Questions & Answers - Questions récentes tagguées ac

No heating/air when remote starting using EVO-START

Thu, 13 Mar 2025 11:20:43 +0000

So I just got the full EVO-START installed in my 2018 Toyota 4Runner this monday and whenever I remote start the vehicle, there's no heating/AC/air coming out until I get inside the vehicle, put the key in, and then move the heating/AC knob.

I already had an EVO-START 2 on my previous vehicle and heating would turn on with the remote start.

Please advise

Start air conditioning on remote start mazda 3 2021

Sun, 03 Mar 2024 12:47:12 +0000

Hi, exist some option to start the air conditioned on the car with the remote start o the mazda 3 2021?

My remote start shuts down after a few seconds if it is hot out and the AC is on

Wed, 15 Jul 2020 14:25:10 +0000

2015 Subaru Forester.

My remote start shuts down after a few seconds if it is hot out and the AC is on when the car starts. Is there a way I can prevent the remote start from shutting down? I have no issue in the winter when I leave the heat on to warm the interior however, in the summer heat, if I leave the AC on, then remote start, the car shuts down after a few seconds. Is there a way to prevent this or troubleshoot the exact fault that is occuring?

Can heat/AC be wired in to come on automatically in 2013 Ford Fusion?

Tue, 17 Jan 2017 08:48:20 +0000

I have a 2013 Ford Fusion SE, and I've installed the EVO-ALL (EVO-Fort2 package) unit and I'm wondering if there is an accessory wire in the white 20 pin supplied plug that can tap into the heat sensor on the lower kick panel to the right of the steering column? I've seen people do this on YouTube in the 2014-2015 Fusions with the same Fortin starter but it's never stated which wire to use with the supplied plug. Is this something that can be done or is it something in the options menu that needs to be turned on? Thanks

Remote start doesn't turn on dash lights or air conditioning/heat

Thu, 05 Jan 2017 22:07:31 +0000

Hello all. I have a 2005 Infiniti G35 (automatic; not intellikey, not push start) and I just installed a Fortin EVO-ONE with the NIS2 T-Harness and a Compustar Slice Remote. I can lock, unlock, release the trunk, and remote start/stop the car. My problem is that when I remote start, the A/C does not turn on (and neither do the dash lights). I have to physically insert my key and turn it to on in order for the A/C to turn on. Regarding connected wires:

A8 (Dk. Blue) (- GRW) is not connected to anything
A15 (Pink/Black) (- Hood pin) is not connected to anything
D6 (White/Red) (Security light) is not connected to anything
D4 (White/Green) (Security light) is not connected to anything
Lt. Blue on the T-Harness isn't connected to anything
Lt. Blue/Black on the T-Harness isn't connected to anything
I cut the security light wire in the g35 (identified via wirecolor diagrams). The wires aren't connected to anything.

Is there anything I'm missing or do I have to turn on a specific setting via Flashlink Updater 2 (which I have)?

Thanks in advance for your help.