Questions & Answers - Questions récentes tagguées acura

When will 2026 Acura Integra kit be out ?

Sat, 14 Mar 2026 03:47:19 +0000

I recently purchased a 26 Integra A Spec, Now usually they do come with remote start BUT since I got a manual i don’t have option woopie!, When could i possibly see the release for a 2026 kit. I’d be willing to try the 25 kit on it but i dont know if it’ll work for sure and rather would play it safe.

2014 acura rdx which t harness

Fri, 14 Feb 2025 21:41:59 +0000

Have a 2014 acura rdx with a push button start. The kit came with a THAR-ONE-HON1 T-Harness. However it seems that it is for key-to-start vehicles. Which T-Harness would work for my vehicle?

Checking for the latest Bypass Firmware version ?

Thu, 14 Nov 2024 14:48:27 +0000

Thar-One-Hon8 manual (Guide #99801 rev:20201228) shows Bypass Firmware Version 73.[38]

does it have newer version?

anywhere I check if a newer version available?

is it recommended to update to newer version if older version works?

Thank You !

for a acura integra is only available for the 2023 one can i use for a 2024??

Tue, 11 Jun 2024 17:39:02 +0000

i need one remote start that works on 2024 acura integra ,

Difficulty in programming EVO-one for Acura RL 2010

Sun, 23 Jan 2022 02:19:50 +0000

Firmware is updated to 73.[38] . When I insert the 6 pin connector the red light does not become solid for me to release the programming button. It keeps alternating the blue ,red, yellow and blue&red and I have done disconnecting and redone step one many times with no result.How can I fix it?

2011 Acura MDX Help....

Sat, 15 Jan 2022 12:21:45 +0000

I installed two of these on my vehicles in the past and everything worked flawlessly. I love this product.

However, today I installed this on my coworkers 2011 MDX (Acura) regular key, evo all, with T-Harness. I made all the connections as per the instructions. The hardest part was getting steering wheel column plastic off. HAHA

I pressed the button and plugged in the 6 pin connector and it just continues to flash thru the colors. It never turns red like the instructions say. I did a trouble shooting form on the website and it says the firmware is out of date. So I just bought a flash link updater.

Is there anything I missed??

Are there any hints to let me know about for the updater when I get it?

THANKS

which model fit as remote starter for Acura RL 2010?

Fri, 14 Jan 2022 15:00:08 +0000

Hi

As the info on your website, EVO-ONE and EVO-ALL fit ACURA RL 2010 but I prefer EVO-ALL becuse it is cheaper.So please let me know if it is fully functionl as remote starter with orginal fobkey of car (x3 lock).

Thank you

Nader Dana

Alarm going off when I turn off car, Acura RL

Tue, 14 Dec 2021 07:46:03 +0000

I'm using evo-one and a omega OLRF42SST Omegalink 2-way remote, I have a 2005 Acura RL. The alarm is going off whenever I use the remote start the car and then when I turn off the car, the alarm goes off.

Flashing key on dash Acura RL

Sun, 12 Dec 2021 19:05:45 +0000

Hello,

I'm using evo-one and a omega OLRF42SST Omegalink 2-way remote, I have a 2005 Acura RL. The car starts fine, however, the key light on the dash is flashing whenever I use the remote start. It does not flash if I don't use remote start. Any help is appreciated.

2010 Acura TL Push Start Evo One will not program

Tue, 23 Mar 2021 13:17:18 +0000

While installing the EVO One to my 2010 Acura TL (with Push-to-Start) I found that several of the wire colors called out by the installation (REV:20191022, Guide 19411) and the Wire Color guide did not match what the car has (on gray 32 pin connector and blue 36 pin connector). I proceeded by connecting at the specified locations shown on the diagram. Once the connections were completed, I attempted to program the module (which was updated and programmed with the Flash Link Updater). Step 1-4 went OK, however, when I got to step 5 (Do not press the brake pedal. Press the Push-to- Start button twice to turn on the ignition-- The RED LED will flash rapidly 10x times. -- Key bypass programmed. --The BLUE LED will flash rapidly. --CAN-Bus programmed.), the red LED extinguished and I could not complete the programming. I tried this several time with the same results. Your help with this issue will be greatly appreciated.

2011 Acura RDX Base 4cyl Turbo Gas Automatic Regular key Remote car start

Tue, 29 Dec 2020 17:41:30 +0000

2011 Acura RDX Base automatic with factory installed keyless door entr and Regular Key start.

1. Will EVO-One remote car start work ?

2. What Harness do we need to oder with EVO-ONE?

3. Appreciate link to Installtion video for this vehicle?

Immobilizer wire color and pin location do not match diagram downloaded from fortin website.

Sun, 13 Dec 2020 13:28:37 +0000

SL3 - 2010 Acura TL 3.7 - Standard key

HELP can't find Ignition2, -Security Light, -Data (no connector or different colors)

Sat, 14 Nov 2020 23:13:49 +0000

Acura 2005 TL, Regular EVO one install.

1 - as per instruction it say ignition2 (yellow color) is on a green connector 5 wires... the problem there is no green connector at all with 5 wires.

2- (-Security Light, -Data) on the connector hold diffrent wires on the real car, I even checked wire-color website and its wrong.

Attached is what I have green color connectors on the car. 2 conectors.

/en/qa/?qa=blob&qa_blobid=328260444253860811

/en/qa/?qa=blob&qa_blobid=9621024662935796406

I have all-data and the digram it shows on Fortin Guide and wirecolor is wrong, my all data matches the real car color.

Now what, where can I fnd them?

Help.

Thanks

2005 Acura TL Remote Start, which EVO product?

Wed, 04 Nov 2020 21:23:24 +0000

I am installing Fortin EVO on Acura TL 2005 remote starter with SmartEvo2. I want to buy the right module. I am planning to use the EVO-ONE to be installed.

My question is, do I need additional remoter starter module to be installed or the EVO-ONE will be enough to be remote starter + bypass and to work with the Evo Start2.

Online it only shows Regular installation. https://fortin.ca/en/vehicles/acura/tl/2005-standard-key/

Help is appreciated please.

Thanks

reset Decrytptor limit on 2016 Acura MDX

Wed, 04 Nov 2020 18:31:28 +0000

Need to have module limit reset

S/N 002B04 106385

Aux options

Sun, 01 Nov 2020 16:44:09 +0000

Have installed evo all on 2014 Acura mdx by professional installer.

The App evo start 2 have big delay and sometimes not responds at all.

Options like trunk/ windows/ heated seats not working at all. And installer said that this options are not supposed.
What should I do? How to connect aux options to control heated seats and HVAC system?

TRUNK RELEASE CONNECTION FOR OEM REMOTE - 2011 Acura CSX Bluetooth,Navigation

Tue, 10 Mar 2020 21:23:32 +0000

Can't find anything on the guide for the connection between the EVO-ONE and the trunk release wire. Which wire for the evo-one is used for the trunk release. The guide for the vehicle does indicate trunk open is supported. The guide only goes through connecting the unlock, lock, horn and parking light. When I hit the open trunk button on my remote (while the car is turned on via remote start) the parking lights simply blink and the trunk does not open.

2010 Acura TSX, what do i need in all?

Mon, 24 Feb 2020 01:35:48 +0000

hello, i have a 2010 acura TSX, i saw the evo all and evo one but ive had a 2010 dodge ram that i fought a pre-programmed evo which was called "Fortin Evo-chr.t4" and just bought the wire harness with that and it worked very easily. Im wondering if there is such a thing for my acura without havin to buy the evo-all or evo-one and program them, would the HONDA-SL3 be what i'm lookin for? EVO-RIDE? EVO-KEY? not sure what all these options are? thank you

Which wire on the THAR-HON-A2 connector needs to be cut for a 2010 Acura MDX EVO-ONE Installation?

Mon, 13 Jan 2020 01:05:40 +0000

The installation guide for the EVO-ONE on a 2010 Acura MDX states that a wire has to be cut on the green male side of the THAR-HON-A2 connector, and that wires D1 and D3 are connected to the two newly created ends of the cut wire. Which wire am I to cut? Any and all help is greatly appreciated. Thank you!

2015 Acura TLX using Evo One and T Harness. Will start only if FOB is in the car.

Mon, 06 Jan 2020 09:27:06 +0000

If starting from outside the car, it cranks but never starts, as if the immobilizer is active due to decryptor key code not working. Ive started over from square one several times with the same results and now it says that Ive reached the limit for this car.....and it still doesnt work.

2016 Acura RDX Standalone with T-Harness door will not unlock during engine Remote Start.

Wed, 18 Dec 2019 15:04:21 +0000

2016 Acura RDX evo-one standalone with t-harness installation. Got the engine start with 3x lock on oem key fob, but when engine is running vehicle will not unlock the door no matter what. Touch the door handle, press unlock button on key fob still not opening the door. Please help.

Is this kit for a 2015 Acura MDX plug and play with the harness are there any wires that are required to be cut?

Tue, 19 Nov 2019 12:00:07 +0000

I want to ensure this is plug and play with harness.

Alarm trigger by using the key to open door manually

Tue, 15 Oct 2019 14:46:22 +0000

After EVO ONE installed, When i open the door with key manually on 2009 acura mdx, it triggers the alam and I have to press the unlock button on door to stop alarm. Is this normal as it wasn't before installing the evo one. I did installation without T-harness and didn't connect the door lock and unlock negetive wires as I could not find these two wires.

2009 Acura RDX key programming

Mon, 14 Oct 2019 12:57:11 +0000

Can't get the key to program. I can't get passed step 4 for some reason. Lights won't flash after I turn the key. T harness is installed and all the wiring is correct.

2016 Acura RDX customer if wondering if EVO-ONE will turn on hvac and seats

Tue, 12 Feb 2019 15:00:37 +0000

When an EVO-One is installed on a 2016 Acura RDX will it activate defrost on the HVAC, turn on the rear defrost, and turn on heated seats automatically over the CAN?

issues with door locks and overtake

Sun, 04 Mar 2018 09:38:24 +0000

So I've Installed a Viper remote starter on a 05 Acura RL this vehicle has a keyless smart key and also key to turn the ignititon switch... So I've programmed EVO-ALL using only the key unable to do so with the keyless, is there a way to program the keyless? Remote starter function works properly starts with no issues now problems im facing Acura alarm has to be disarm before starting, well once it starts doors dont lock as well no status input is present I can open the door press the brake even shift it into gear and it wont shut off... So remotes and door locks become inop when the vehicle starts and after I shut it off from the remote everything works again I've double check my connections and they all are on the right spot... EVO-ALL is communication with the vehicle when off but not when engine running... Hope im clear enought Any ideas or suggestions is highly appreciated possible im missing somthing but not sure?

2004 TSX Crank but won't start

Mon, 12 Feb 2018 22:42:40 +0000

Hi All, I'm a bit stumpt on this one, I have a 2004 Honda Accord euro (Australian version of the Acura TSX) i'm using an EVO-ALL with Compustar FT7000, the EVO-ALL has programmed correctly but the car will only crank on remote start and not start, put the key in the ignition and the car starts fine I have reversed the white red and white green which did not fix the issue and I have tried earlier firmware which also didn't fix the problem, when the remote start engages the yellow and red lights light up on the evo-all. If you start with just the key only the yellow light is lit. anyone have any insight it would be greatly appreciated alos the car will start with the key even if the security light connection is cut which leads me to think it is to do with the data wire which is connected to the light blue wire of the evo-all (i have checked twice to make sure it is not connected to the light blue/black wire.

Regards

Chris

2012 Acura TSX - Honk horn instead of beep?

Wed, 27 Dec 2017 19:09:17 +0000

I've installed an EVO-ONE into my 2012 Acura TSX, and everything works great, but I'm just wondering if it is possible to use the power of the EVO-ONE to honk the horn whenever I lock the car.

The problem is that it's almost impossible to hear the tiny beep from any sort of reasonable distance, and since that's the only way to confirm whether or not the car is started, it would be nice to use the horn output as well.

If anyone knows a setting for this, or how it could be done, please let me know. I have already hooked up the horn output of the EVO-ONE to my car, but that only seems to work for the alarm.

Thanks!

Ignition on but no crank

Sat, 20 May 2017 18:16:40 +0000

Car won't crank when remote started unless key is in and clutch is pressed. Is this a programming issue??

ACURA TSX How can I make the EVO-ONE turn on the rear defroster?

Wed, 22 Mar 2017 20:31:17 +0000

I know i can use the EVO ONE automatic aux 1 trigger under 40 degrees F but does anyone have any information on how to tap into the rear defrost trigger?

Can't locate the Lock/Unlock Connection

Mon, 06 Mar 2017 20:48:53 +0000

Installing an Evo-One in a 2008 Acura RDX and can't find the connector for the lock/unlock wires.

The THAR-ONE-HON1 guide says it is a White 34 pin connector.

The Wirecolor wiring photo shows it as a 16 pin connector.

the12volt.com site says its a Blue 23 pin connector.

I can't find any of these.

Can't locate Parking light (-) wire on 2008 Acura MDX. Can I use (+) wire instead ?

Fri, 03 Feb 2017 03:50:20 +0000

Hi. I installed EVO-ONE with T-Harness on 2008 Acura MDX. Follwed your instruction and everything works so far. However, I can't find "Parking light (-) wire" on the light switch. I probably have to remove the steering wheel to remove combination switch assembly to find that wire.

Is there any other way to get this to work ? Is there any option on EVO-ONE to switch the polarity of Pink wire on A12 so that I can use "Parking light (+) wire" instead ? ( (+) is near fuse box, much easier to access than removing the steering wheel.)

If not, is it possible to wire an LED and hook up its lead to somewhere in EVO-ONE ? ( I can install one LED on dashboard as an indicator light)

Your help is greatly appreciated.

Thank you.

- James

Evo-One E1 siren install

Sat, 23 Jul 2016 18:35:18 +0000

How would I hook up my siren? It states pin E1 can be used as a + output option 1, or should I use the - horn output and choose option 4. Also, if using E1 does it reqiure a relay between it and the siren?

Acura TL no start with 3x lock

Sun, 29 Nov 2015 00:36:22 +0000

2010 Acura TL PTS doesn't start with 3x lock. I see the module going from red to red and blue but doesn't start.

I have a LED status light hooked up to my remote start and it isn't on or blinking at all. So I'm thinking it's an issue on the remote start side? Not sure where to start. I've programmed the evo successfully multiple times.