Questions & Answers - Questions récentes tagguées advanced-keys

Security Light still flashes

Sat, 20 Dec 2014 17:45:42 +0000

Hi,

I have a 2014 STi with an Advanced Keys keyless entry and push button start system. When the doors unlock the security stays flashing at a slow rate and I'm unable to turn ACC power on, or start the car. I have tried numerous times wrapping the key and ignition barrel and also wrapping the key to the barrel itself, but all to no avail. I do have a TB-SUBARU 2 which I still need to get programmed at the dealership, so currently I'm wrapping the key. I have also put a spare key in the ignition barrel in the ACC position to bypass the steering lock.

Do you have any suggestions?

adding a advanced key system to 2010 camaro.

Sun, 22 Jun 2014 08:38:25 +0000

how do i wire the evo-all with tharnes for the advance keys push button start system (http://www.advancedkeys.com/Prod_AK104B.html). also to make clear i do wire the smart key to the evo all correct.

Dodge Nitro 2011 "Heat" 4x4 with Advanced Keys install

Thu, 17 Apr 2014 23:10:47 +0000

I am getting a Advanced Keys (http://advancedkeys.com) setup that, as per the manual says, hooks up directly to a Fortin EVO-CHR + T Harness(T2). Now this manual is pretty old, say back in 2007 or so, and now a lot seems to have changed.

The guide on this website points to the THAR-CHR5 as the box i would need for my car. However, i dont see much of the color wires the same (and output locations) as it has in the manual i got from Advanced Keys.

Could anyone from Fortin be so kind in re-working this setup in the manual below so it points to the correct wires for the THAR-CHR5 instead of the EVO-CHR + T Harness(T2)?

I also would like to know what letter (A, B, or C) I would need to choose once I start installing it with the Advanced Keys kit. I see i have 3 options for my Nitro:

(1) With Data-Link
(2) Without Data-Link
or
(3) Stand alone

I am getting nothing.

Mon, 03 Feb 2014 18:37:28 +0000

I recently connected an Evo-all bypass in conjuction with an advanced Keys 105s system to my 2006 Pontic G6. I was able to program the unit and all the and all the lights flashed correctly but I am not getting anything out of the unit, IE, When it sends a signal to lock or unlock my doors nothing happens, with out the special key present I can still start the car. it is as if the box makes no difference besides blinking lights at different points of time. If you email me I can send you a spreadsheet of what wires I connected to what. Firmware version is higher than 4.06

Thanks for the help

Scott