Questions & Answers - Questions récentes tagguées altima

How to connect D4 D6 , 2006 Nissan Altima

Sun, 23 Jan 2022 14:24:37 +0000

I'm using evo-one with niss2 harness for my 2006 Nissan Altima I am confused about the connection D4 and D6 showing guide #78211. I also don't know where to connect the pin 30 from the relay for parking lights . A picture would be great, or can I leave the parking light unconnected? The last question, do I have to have a RF module to remote start? Because when I put my key at on position, the blue lights went off.

have to push the pts button several times for 2015 nissan altima to turn off

Fri, 14 Jan 2022 20:59:16 +0000

im installing a evo-all nisa4 t harness in my 2015 nissan altima. it will start with the remote start oem fob but after getting in the car to shut the engine off/on you have to press the pts button several times for it to do anything. what am i missing?

Altima will not start

Mon, 25 Jan 2021 22:47:04 +0000

I installed this on my 2011 Altima. Flashed and programmed fine, when I hit lock 3x the parking lights will flash and brake lights turn on but doesn't start. If I have another person sit in the car and push the start button while remote starting, vehicle will start. Not sure what to do please help.

Nissan Altima 2010 EVO Start 2, unlock/lock not working

Fri, 01 Jan 2021 03:47:49 +0000

Hi

I puchased, Evo all with NIS1 and followed the instraution for Nissan Altima 2010 push to start. Car can remote start with 3X lock and also from EVOStart2 but the unlock and lock function is not working through the app. I see the car lights are flahsing when lock or unlock is sent from the app but door doesnt lock or unlock. I can only remote start through the apps or 3X lock from factory remote.

Please help

2015 Nissan Altima Ignition Ignition 2 wire

Wed, 02 Dec 2020 10:08:45 +0000

Not a question so much as an update to your notes. On the installation instructions it shows Ignition 2 as Pin 9 Black 24 Pin plug as a Pink wire. Vehicle I had it is not a Pink Wire it is Brown but when tested goes + when PTS is hit for ACC or IGN.

HELP Nissan Altima 2013 Push Start

Tue, 03 Nov 2020 20:26:46 +0000

I ordered Nist4 with Evo all for a Nissan Altima 2013 Push Start. Its a plug and play on the BCM behind the cluster. Everything went fine with programming, but when I try to start the car while I am inside with press brake and push button to start gives me error i-key start error, the engine ticks no turn over.

When I am outside to remote strt 3xLock, it starts!! but inside using the normal car starting keyfob it doesn’t? I decrypted the module twice and also and sometimes it ticks no start. I programed it to car twice everything went well, all the flashing when I was programming went exactly per book, help please??

- Option D6 is on

- ignition turns on but error message i-key error refer to user manual

- car ticks when I press brake and push start, but no start and error message i-key error refer to user manual

- sometimes with remote start 3xlock the car starts sometimes it just ticks like I am inside the car

- SN: 001A07 119247 EVO-ALL

Each remote for Axxess AX-RF2 acts differently

Sun, 13 Jan 2019 16:49:29 +0000

I installed the Axxess AX-RF2 kit with my evo all and each remote acts differently but both start the car. One makes the tones like it should but the other only beeps and flashes a red light when starting car. I tried reprogramming multiple times and doing them in different order but same result. I checked batteries in both remotes and both measure ~5.8 volts. Is this the problem or is it something else?

Can I wire my rear defrost to come on automatically with an Evo-NIST 1

Tue, 25 Dec 2018 20:12:53 +0000

Can I wire my rear defrost to come on automatically in my 2010 Nissan Altima with an Evo NIST 1?

2011 Nissan Altima Evo All with Thar-nis1, guide 12661 is correct one?

Tue, 06 Mar 2018 12:23:01 +0000

I use the guide 12661 to install the evo all with thar-nis1 on my 2011 nissan altima. Ran into trouble programming, look into troubleshoot section and there are many guides but 12661. Which guide number should I choose to troubleshoot my installtion. Some other guide shows that I need to cut some wires which I did not do on mine. Little confused. Need some help.

Altima programming stuck on step 5

Fri, 02 Mar 2018 20:01:37 +0000

I submitted a question on 2011 nissan altima stuck on step 5 of the prgramming. I missed 1 thing, the red led is on but the yellow led is off and the blue Led is not on.

please advice

Programming Step 5 - wait for Blue Led to turn on

Fri, 02 Mar 2018 18:44:10 +0000

2011 Nissan Altima. installed the harness per instructions. I performed successfully through step 4 as the Yellow LED turn solid. Press and release the Push-to-start button once in step 5, the RED Led turn on, wait for the Blue Led turn On, there's 15 minutes waiting and the Blue Led is not turn on. Please advice

2008 Altima PTS

Thu, 15 Feb 2018 19:01:12 +0000

Install evo-all and all wiring complete. After remote starting with oem key 3x lock, car runs about 3 seconds and shuts off. Then it tries to restart itself, ultimately leaving the ignition in the acc position. I Was told to flash a different firmware version of 72.23, still not working. Added rf kit revostart 1.1 same results. Need help please.

2011 Altima PTS 'No Key' on Instrument Cluster

Mon, 15 Jan 2018 10:43:20 +0000

2011 Altima Push-To-Start
Using T-harness. Connected to OBDII, Brake Pedal, Keybox.
Tapped into Brown wire on push-to-start button.
A1-A11, C1, D1, D1.2, D3 Enabled
Latest firmware for flasher and EVO-ALL

Went through programming sequence (with battery out of FOB). Sequence completed sucessfully ending with rapid-flashing yellow light. When activated with FOB inside vehicle, it starts fine with the 3x lock press. With FOB removed from vehicle, 3x lock press does not start vehicle. Vehicle displays "No key" message on instrument cluster.

I have tried to re-flash and re-program the EVO-ALL multiple times, all with identical results.

What am I missing here?

Are Lock unlock A2 and A3 optional 2010 altima PTS EVO All

Sat, 13 Jan 2018 19:49:39 +0000

If A4 and A5 are hooked up, do A2 and A3 need to be hooked up, and vice versa?

2008 Altima PTS

Sun, 26 Nov 2017 21:06:33 +0000

I installed on 2008 altima pts, car remote starts but only runs for about 3 seconds then shuts off when pressing lock button on oem remote 3x. Any way to resolve my issue? Tech support said firmware downgrade was needed. I changed to 72.23. That didn't work. Need help please

2012 Altima PTS starts after program then nothing. 3 flash parking light code.

Tue, 21 Nov 2017 08:05:52 +0000

Hook control unit up, vehicle starts remotely fine. After that, further attempts fail. Module lights up in correct order but doesn't start.

relais pour pathfinder, altima et murano

Wed, 02 Aug 2017 12:25:53 +0000

je voulais savoir si éventuellement, il va y avoir une solution pour ne plus installer les relais sous le capot. Idatalink on la solution. Je préférerais continuer avec vous. Merci

2012 altima will not start

Sun, 17 Apr 2016 11:07:05 +0000

install all the harness and use a ttab to wire to the brown wire to the pust to start button. Did the aapropiate programing following the instructions, all lights flash accordingly. I try starting the car and it wouldn't do it. The red light turn and yellow biinks and you can hear the module clicking but the car will not start. Any advice so i can get my remote start to work properly.

Car Shutoff after 15 minutes - even when driving

Sun, 14 Feb 2016 12:43:32 +0000

I've installed EVO-NIST1 in Nissan Altima 2012 2.5S (Push to Start), connect all the cables as per installating guide. I'm using my OEM Key Fob to remote start by pressing lock 3x. I've configured EVO to run time 15mins. It's working fine after 15min car shutoff if you don't drive. But if I start remotely and dirve within 15mins ( unlocak car using Remote and dirve), Car SHUTOFF exactly 15min after I started remotely, even I'm driving. It happened with me more than 4 times, thank GOD I was on signal stop when 2 times it happned and the two time when I drove and was in parking lot. Car shutoff. I've to start by push to start.

These days what I'm doing is start car remotely so car can heat up and when I need to drive, I've to shut off by pressing break and start again to make sure car doesnt shutoff in middle of highway.

Let me know if I'm missing any configuraiton.

thanks

Rear Defroster - Nissan Altima 2012 2.5

Sun, 31 Jan 2016 17:43:49 +0000

Hi, I just installed EVO-NIST1 as per Installation Guide in my Nissan Altima 2012 (Push to Start - Auto transmission) for using my OEM Key Fob 3x to Remote Start and OEM Key Fob to Remote Shut Off.

Is it possible to switch on rear defroster /defrost when Remote Start ? if yes than where can I get the wiring connection diagram for Altima 2012 etc...

I'm using OEM Key Fob Only.

Thanks

Altima 2012 - Car Not Shut Off from long distance but Starts

Sun, 31 Jan 2016 11:38:12 +0000

Hi, I just installed EVO-NIST1 as per Installation Guide in my Nissan Altima 2012 (Push to Start - Auto transmission) for using my OEM Key Fob to Remote Start and OEM Key Fob to Remote Shut Off.

Note : Flashed with the Latest Recommended Firmware for Nissan Altima 2012. Configured first Mode (Remote Starter) - Options enabled (A1,A2,A3, B1, C1, D1, D1.6, D2, D5, D6)

Also configured mode bypass with same options mentioned aboved.

Ever things works as it should be,

From Distance (car) 1-8 meters when I press lock button x 3 times (OEM Fob key) car starts and when I press lock button x 3 times again car shut off.

From Distance (car) 10-30 meters when I press lock button x 3 times (OEM Fob key) car starts and when I press lock button x 3 times again Car NOT SHUT OFF. Until I walk in distance under 8-7 meters to car than if I press lock button x 3 times Car shut off.

What I don't understand if I've a problem with OEM Key Fob distance limitation than how come I able to Start Car from long distance ( 10-30 meters) but at same distance Not able to shut off.

Help me out with this issue, is there any optin that I need to enable or disable ?

EVO-ONE-2005 Altima dont have a (-) parking light wire only a (+) one.

Sun, 20 Dec 2015 05:29:19 +0000

EVO ONE

2005 Altima

Reguar Install NO T harness.

2005 Altima dont have a (-) parking light wire only a (+) one.

According to Regular Instalation guide(Guide #16421), I need to connect the pink wire to a (-) Parking light wire but i only have a (+) Parking light wire.When we look at the T harness Instalation guide(Guide #18201), Its not even using the data and parking light wires.insted uses Auto Light shutdown Dr, Blue wire. Which one i should follow?

Using Evo-All as a Stand alone on a 2007-2008 Altima

Mon, 09 Feb 2015 15:43:46 +0000

I am installing an Evo-All into a 2008 Altima and using the OEM remote as the first choice for the install.

I understand from previous Q&A posts that the Evo-All can be used as a stand alone remote start in this model year but because it cannot detect the lock/unlock on the CAN BUS it will need to use a separate RF Kit or an Universal Trigger connected to the external input of the Evo-All.

Also The Evo-All needs to detect the unlock pulse to allow key take over. A suggestion was to see if pin 15 on the BCM tests negative with a press of the unlock of the factory remote to connect the unlock input of the Evo-All to that. (Assuming that this pulses not only with the remote but also with a press of the door button)

For the questions.

If pin 37 on the BCM pulses negative with each remote lock press, could you just connect the Evo-All lock in wire to that pin to allow 3x remote start?

One of the optional connections is to have the Evo-All lock out connected to pin 37 on the BCM and the unlock out to pin 15 on the BCM. Is it okay to have the Evo-All lock in and lock out connected to pin 37 and the unlock in and unlock out to pin 15 without causing problems.