Questions & Answers - Questions récentes tagguées cranks-no-start

2011 Toyota Camry remote starter engine cranks but won't start.

Sun, 22 Oct 2023 19:17:54 +0000

Hi guys, my again over here, almost winter and ppl locking for install remote starter in they cars. I am trying to install an EVO ONE with a k411 RF module in a 2011 Toyota Camry but it does not send the start pulse. This has happened to me on two 2011 Toyota Camrys, exactly the same problem. It is not a type G key, it is a standard key. I am using the same guide: https://fortin.ca/download/81181/EVO-ONE_IG_REG_BI_TOY-CAMRY_KEY_2007-2011_A_81181.pdf I used the same installation wiring and the same programming on both cars, but the result was the same, the car does not receive the start pulse.

I have already seen that someone on the forum had a similar problem and they did not give a concrete solution: https://fortin.ca/qa2/121279/2009-toyota-camry-remote-starter-engine-cranks-but-wont -start

Here I share the video with the problem and the data of the car and the EVO ONE module to see if you can help me: https://drive.google.com/file/d/1RQyDUUYFEomx9kqWpx2LhHOuaz0FOUmN/view?usp=sharing

Module: EVO ONE S/N: 002B04339802

Car VIN: 4T1BF3EK6BU678116

Thank you very much for advance.

Evo one cranks but no start

Thu, 08 Jun 2023 00:29:41 +0000

CX-5 2016, never starts on first attempt, usually 2nd one is successful but I wonder if there is anything that can fix this behaviour. Transmission is manual. Tried several solutions recommend on this site but still the same.

2018 tundra cranks but doesn’t start

Wed, 19 Sep 2018 19:27:39 +0000

It was working fine I changed some settings with flash link , now starter turns but truck start, can you check my settings to see if I’m missing something ?

Bypass C1 and D5

2012 Tundra will not start, just continuously cranks over

Mon, 26 Jun 2017 23:11:15 +0000

So I purchased a pre flashed EVO One with Toyota 2 harness and RFTX64-2W remotes, for my 2012 Tundra. I hooked up all the listed wires in the install, which I verified multiple times per your diagram. All my connections are soldered and covered using shrink wrap tubes. I have read through all your Q&As and still have had no luck with the remote start. After the Tundra continuously cranks over, the parking lights flash 4 times. Please help.

Jeep Commander not starting.

Sun, 09 Apr 2017 22:28:30 +0000

I was able to program the device, when i go to start the vehicle doing 3x lock button, it makes a sound but it will not crank. Just makes a noise like when the key is in the on position. Noticed diagram says to add a hood pin. Will this prevent the device from working?

I am using a standalone config.

Thanks, any help is greatly appreciated.

2015 Tundra with Evo One SOMETIMES cranks without starting

Fri, 17 Feb 2017 20:16:12 +0000

I installed an EVO-ONE on a 2015 Toyota Tundra. 1 out of 5 times when he engages the remote start, the truck will crank for around 8 seconds without starting. The other times it starts perfect. Tach is set to data only, and is not set to crank for 8 seconds. He said also every once in a while the lights on the dash will shut off at night after a few minutes of driving. I used the t harness and as always, i soldered the rest of the connections.

programming settings for 2015 tundra, everything works except it only cranks 8 seconds then tries again.

Sun, 28 Feb 2016 13:08:57 +0000

please help.......