/en/qa/tag/crosstrek Powered by Question2Answer /en/qa/85368/remote-start-only-after-key-turned-on-after-shut-down Installed the EVO-ONE SUB-1 into a 2016 Crosstrek, ths installation went pretty well. The install was done for a friend. Found out that the remote start only operates correctly if the car is driven and shut off and the key is turned back to the on position and then back off. If the key is not turned back to the on position the remote start will not function, no light flash or horn honk. I dont have the unit in front of me so I can not see the settings or have the service number from the unit Subaru /en/qa/85368/remote-start-only-after-key-turned-on-after-shut-down Sun, 09 Dec 2018 14:51:37 +0000 /en/qa/74029/2016-crosstrek-wont-read-immobilizer-data 2016 Subaru Crosstrek push to start with eyesight system. When trying to read immobilizer data, the lights on the Fortin All module flash red and blue 5 times a second like they are supposed too, but when started, the read and blue lights go solid, and nothing happens after that. The lights go solid as soon as the start button is pressed. The immobilizer circuit is all yellow, unlike what wirecolor.com shows, but I believe this may be correct. There is around 10.3v on each immobilizer circuit at the fortin module. There is 13.8 at the igntion circuit with the engine on. Subaru /en/qa/74029/2016-crosstrek-wont-read-immobilizer-data Sun, 27 Nov 2016 19:53:07 +0000