/en/qa/tag/cx9 Powered by Question2Answer /en/qa/94733/cx9-not-completely-turning-off I have a 2019 CX9 with an EVO-One installed everything works pretty well with the remote start but every so often I have an issue when I park and push the button to turn off the car. The engine stops but the car says the ignition is still on.Pressing the button a few more times usually fixes this but, this morning I had to disconnect the battery on the car because the ignition tamper alarm was set. Any ideas of a fix for this? Mazda /en/qa/94733/cx9-not-completely-turning-off Wed, 08 Jan 2020 13:01:33 +0000 /en/qa/84505/no-blinking-blue-light-when-programming-in-step-4-of-install-guide-for-a-2018-mazda-cx9 I bought the EVO-One and the THAR-ONE-MAZ3 T-harness for a 2018 Mazda CX9. I got the t harness installed fairly easy but am having trouble programming. I hold the programming button while I connect the 6 pin main connector, release when the blue light is solid, connect the rest of harness, press on 2x but the LEDs never flash as instructed. I'm not sure how to proceed from here, I've reset the module and tried a few times. The 20 pin connector has a bunch of lose wires on the t-harness, should this be connected to anything? From my understamding only the optional parking light wires needed hardwiring, everything else was plug and play. Mazda /en/qa/84505/no-blinking-blue-light-when-programming-in-step-4-of-install-guide-for-a-2018-mazda-cx9 Sun, 21 Oct 2018 17:19:51 +0000