Questions & Answers - Questions récentes tagguées dot-key

2010 Toyota Camry EVO All with Scytek Alarm

Sat, 31 Dec 2022 20:56:55 +0000

Installed an Evo All with a Scytek Astra and everything worked fine but the bypass started unlocking the doors via the datalink cable as if a button was being pushed and it disables the aftermarket remote functions until the bypass is unplugged. Does anyone know the protocol that the bypass should use for a Scytek system or does it need to be hard wired completely as the guide calls for wire to wire since scytek isn't listed?

evo one programmed correctly but no crank

Fri, 19 Feb 2021 19:14:34 +0000

2009 corolla (standard key)A/T

service#002B07-164975

Install guide #81101

followed the exact connection on the guide and succesfully programed module, but

when remote starting with oem 3xremote ignition comes on but does not crank at all.

Also coud not get to program the Rfkit model ANT-FMH SM remote model FTX84

please help!!thank you.

Replacing broken evo one unit with another on a 2010 Toyota Tundra.

Thu, 10 Dec 2020 00:39:34 +0000

My evo one was working great in my 2010 Toyota Tundra standard keys for about 6 years. When installing a new my car unit, I accidentally broke one the connector from the evo one unit. So I got another evo one unit and install it. I could not program the evo one with the newer guide. I think my t-harness was a toy1. So I got it to programmed with the blue light, turn the key, and the blue light flashed rapidly. I got the vehicle started 1 and it never start again. The red light by the programming button flashing. I don't think it does that before. Please help

toyota corolla 2010 dot key evo one crank but doens't start the engine

Sat, 14 Nov 2020 14:30:07 +0000

toyota corolla 2010 dot key evo one crank but doens't start the engine

2011 camry dot key cranks no start

Wed, 13 Mar 2019 11:10:20 +0000

I followed the instructions on guide and the car will crank with the remote starter but only runs while using the key

cant get thru step 5 of RF642w remote programing, parking lights didnt flash to confirm programming?

Mon, 26 Dec 2016 15:25:02 +0000

rf642w on evo one

toyota corolla 2010 CE with tharness with dot key

VALET BUTTON NO RESPONSE IN RF642W PROGRAMMING TO EVO ONE

Fri, 23 Dec 2016 19:56:54 +0000

IM TRYING THE INITIAL STEP OF PROGRAMMING RF642W TO EVO ONE BUT NO RESPONSE(PARKLIGHT/HORN) FROM HOLDING VALET BUTTON WHEN KEY IS TURNED TO ON POSITION

2010 COROLLA AUTOMATIC W/ DOT KEY W/ T-HARNESS

do i need fuse protection from evo one in between connections for rf kit 642w re: 750 mA max output requirement

Fri, 23 Dec 2016 10:33:23 +0000

rf kit 642w wiring guide

connectiong EVO ONE module to (-) lock/ (-) unlock wire requires 750mA max current

does it need fuse protection in between connection

corolla 2010 AT dot key w/ t-harness

Is adding rf kit 642w a straight plug and play connection to evo one or i have to solder some additional wire ?

Thu, 22 Dec 2016 13:58:24 +0000

adding fortin 642w rf kit

2010 corolla AT w/ dot key with evo one module

2010 Corolla dot key EVO-ONE programmed but no response from factory remote

Thu, 01 Jan 2015 14:16:51 +0000

Installed evo-one in 2010 toyota corolla with dot key. Module programmed ok but does not appear to receive command from factory remote 3X lock command to start. Do I have all the appropriate options turned on/off for the bypass/remote start? Is there something else I need to check?