Questions & Answers - Questions récentes tagguées evo-nist4

Q50 not remote starting

Mon, 06 Jul 2026 04:12:34 +0000

i have a 2015 infiniti Q50

SN-002B04 759527

i installed the evo-one with thar-nis4 t harness and RF942 kit.

programmed, decrypted and reinstalled tested with oem keyfob worked great, than i programmed the 2 RF remotes, test again worked good 3 times then just stopped working. i can still unlock/lock with all 3 fobs. it will try to remote start, gets to where it should crank and nothing.

Need help q50 not starting

Sun, 08 Feb 2026 08:13:09 +0000

I have Infiniti q50 2016 3.0L

I installed the EVO-NIST4 to use with OEM key fob , the ignition is tuning on but no cranking, then the red LED flashes 3 times,

the SN is 001A07471366

here is the sequences of LEDs during the attempt

OEM key fob locks 3 times

red LED

red and yellow LED

Then yellow LED is on

vehicle hazards indicator flashed 7 time

After that the red LED flashed 3 time

I checked all the connectors

The car locks and unlocks when the blue LED flashes

I didn’t connect the hood pin

I reprogramed the module

followed the recommended option by the software but I’m not sure the options I’m selecting are correct for my setup

I’m following guide 75841

No start Q50 2016 EVO-NIST4

Wed, 04 Feb 2026 08:38:27 +0000

Hi,

I have Infiniti q50 2016 3.0L

I installed the EVO-NIST4 to use with OEM key fob , the ignition is tuning on but no cranking, then the red LED flashes 3 times,

the SN is 001A07471366

here is the sequences of LEDs during the attempt

OEM key fob locks 3 times

red

red and yellow

yellow

vehicle hazards indicator flashed 7 time

red flashed 3 time

I checked all the connectors

The car locks and unlocks when the blue LED flashes

I didn’t connect the hood pin

reprogramed the module

followed the recommended option by the software but I’m not sure the options I’m selecting are correct for my setup

I’m following guide 75841

Any help would be appreciated

2016 Nissan Altima PCM humming sound and park lights staying on

Thu, 07 Nov 2024 20:47:41 +0000

Installed compustar alarm with remote start using a EVO-NIST4 and diagram75491, d2d cable being used. For some reason the PCM is humming and the park lights are on, what can be the issue? Do I change out the power wire fuse to a 1 amp since it comes with a 30 but I am not using those, just the D2D as the diagram says.

2021 Nissan Frontier evo-nist4 wont work.

Mon, 17 Oct 2022 13:16:35 +0000

Module hooked up and programed correctly, do 3x lock, blue blinks every push, then orange and red come on, red shutsoff and orange stays on. No start.

Add ASCL6 with RFK942

Tue, 08 Mar 2022 13:51:05 +0000

I've installed the EVO ALL with T-Harness (EVO NIST4) and the RFK942 RF kit to my 2016 Infiniti Q50 (3.0T). All works well.

I am considering adding the Car Link ASCL6 system to my car. My question is can I use the RFK942 together with the Car Link or will I have to choose between one or the other If I can use both, will I need something added to the existing T-Harness (EVO NIST4) in order to connect them both (such as RFA2A)?

Thank you in advance for your help.

NIST4 Harness

Sat, 19 Feb 2022 08:48:41 +0000

Is it necessary to cut the 15 pin white connector that contains the red and black wires (power and ground) on the NIST4 harness for the 2016 Infiniti Q50 3.0 as shown on Guide #75841?

Guide # 75841

Q60 2.0t 2018 Europe work with EVO-NIST4 ??

Fri, 21 Jan 2022 09:27:02 +0000

Hello, i live in France and i want to buy a EVO-NIST4 for add remote start....

It's working with EuropeModel's ?? I have Q60 2.0T 2018....

Thanks