Questions & Answers - Questions récentes tagguées excalibur

Fortin EVO one. Cannot find option RFLF. Option not available. Cannot program Excalibur RF51EDP

Thu, 24 Mar 2022 21:29:27 +0000

I have a Fortin Evo one and cannot seem to program the Excalibur RF-51 kit. I follow the directions but the option is not available as shown in your instructions. Please help.

Best options to use with Excalibur AL-1870-30B

Wed, 02 Dec 2020 21:10:24 +0000

Installing Excalibur AL-1870-3DB 2-way remote start and alarm into my 2007 GMC yukon using evo-all with t-harness and data-link. I'm just double checking the best options to use on the flash link manager to get full use of my excalibur system and especially the 2-way system part of it. Also settings you recommend leaving off and any other wiring conections not supported by datalink other than ignition, 12v and ground. Any and all advice is much apreciated, the more info the better. Hoping to get everything installed Friday or Saturday (12-4-2020/12-5-2020) Thank You.

Excalibur Rf11Edp Rf Kit 1-Way

Sat, 19 Sep 2020 16:56:18 +0000

Excalibur Rf11Edp Rf Kit 1-Way will work with evo all Stand alone?

Excalibur RS4753D Deluxe

Wed, 09 Sep 2020 15:30:07 +0000

I would like to know if Excalibur remote start work data to data and how setup

Excalibur RF51EDP Paging Notification

Wed, 06 May 2020 18:20:11 +0000

I am adding a Excalibur RF-51-EDP to my EVO-ALL Alarm/ Remote Start. My question before purchasing this unit is will paging notifications work with my EVO ALL? The only reason I am getting this kit over a fortin RF kit is the ability to recieve notifications on the remote if someone tries to get into my car or sets the alarm off when it's nearby. I found on the Fortin RF kit page that it is compatibile, but it doesn't say if paging will work or not.

EVO One and Excalibur RF51-EDP no RF option available

Sat, 08 Sep 2018 07:06:39 +0000

I am installing an EVO One into a 2006 Cadillac CTS. I have the module, the Flash-Link, and an Excalibur RF-51-EDP RF remote kit with antenna. The RF-51 shows as compatible with the EVO One. The instructions for enabling it appear to be outdated. I am using Flash-Link v.4. My remote start firmware is 1.24. My bypass firmware is 70.34. The instructions for using the RF-51 show a menu that does not exist on my screen- "Click configuration then unit options."

EDIT: For clarification, I have no options past section "D". I think the RF kit compatibility is section "H". There is no RF comptibility option for either the bypass or remote start.

Should I downgrade the Flashlink software? The instructions say Flash-Link-2 (I can't find any directions for V4), so I'm presuming this was a feature that used to be available.

Nissan Rouge 2010 door locks keep locking and unlocking, also pops the trunk under remote start.

Sun, 31 Jan 2016 20:07:34 +0000

Evo all used with