Questions & Answers - Questions récentes tagguées factory-disarm

Fusion not disarming after locking with factory remote

Fri, 09 Aug 2019 13:36:45 +0000

2010 Ford Fusion with Evo-All and THAR-FOR4

When I lock the doors with the factory keyfob and wait over 30 seconds before unlocking with the Fortin RF642W fob, the factory alarm will sound when opening a door. If I open the drivers door first it starts counting down and can usually turn the key to disarm it. I have also had instances when a door is open while locking the Fortin fob it the alarm will also be triggered, after unlock and a door opening.

OEM Alarm no longer working

Thu, 13 Jun 2019 16:15:51 +0000

I installed an EVO-ALL in my 06 Pathfinder a few weeks ago and everything is working except arm and disarm. I have the unit paired with a crimesropper starter through data. There are no wires populated in the BCM for lock and unlock, so I am using the evo all to control them through CAN. The locks function, but they don’t disarm or arm the factory alarm. Is there any way to change this?

2004 Lexus GX470 - Door lock rearms 30 secs after unlock, even after the door is opened

Mon, 12 Dec 2016 22:18:34 +0000

On the Evo-One, with Function 15 (Smart Arming Smart Doorlock Smart Lock pulse) , Mode 2 ((Unlock signal) Automatically LOCK and rearm alarm if door(s) are not opened after 30 seconds.). The door locks even, with the doors opened. Is there a wire to montior the door trigger or dome light to determine that the door has been opened after the unit has been disarmed?

2004 Lexus GX470 - Steering memory disabled after remote starting car with Function 6 (Door Lock) to Mode 2

Mon, 12 Dec 2016 20:39:46 +0000

My steering memory function where once you put the key in the steering wheel will adust to the last memory position has stopped functioning after I changed Function 6 (Door Lock), Mode 2 (Unlock before remote-start & Lock after remote-start.). I know the memory function still works in my car because once I put the key in, the key sense will trigger the steering wheel to the last memory position. It worked before when Function 6 (Door lock) was at the default mode 1 (No). I had to switch mode 2 as the factory alarm would be triggered when activated the remote start feature.

When I am inside the car, and use the remote start feature, I can see the car unlocks and the steering wheels moves the steering wheel a little, then stops before the car is locked again and then the remotes start feature is activated. I think the key sense signal is stopped once the car is locked again, and then the remote start is activated.

How do I fix this issue or would this required an update and a reflash of the Evo One?