Questions & Answers - Questions récentes tagguées flash-link-2-updater

Proper modules for 2013 VW GTI std key manual trans

Thu, 06 Feb 2020 19:26:23 +0000

I want to make sure I purchase the correct devices for a smooth install. My understanding is that because I have a manual transmission, I need the Evo-One, TB VW transponder bypass, Flashlink Updater 2, 7.5amp fuse, and relay.

Can anyone confirm the Flashlink Updater 2 is needed as opposed to the latest Flashlink Updater 4?

No T-Harness available for 2013 VW GTI standard key yet?

Is it compatible with the Prestige PE2LCDZ 2-way remote transmitter kit key fob flashlogic RF start 1 mile? If not, is there any adapter that would enable compatiblity with the prestige RF kit?

Thank you for your help!!

Flash limit reached. 001A06292875

Tue, 01 Oct 2019 19:01:43 +0000

Just received new evo all. Flash limit reached. Can I have it reset?

Flash limit reached

Sun, 29 Sep 2019 15:04:04 +0000

Flash limit reached

The dcryptor has reached maximum limit for this car

Wed, 17 Jul 2019 21:30:05 +0000

Please reset my module for dycrptor iam not what's happening with module it works for couple of weeks then when try starting my car it activates the alarm so I reprogram it and decrypt and it starts working.

Flash link not compatible with device?

Sun, 31 Mar 2019 21:44:56 +0000

When connecting my evo-all to the flash link through flash link manage I get a message saying flash link is not compatible with the device. What is up or what did I do wrong? It never gets to a screen to select vehicle just stays in the home screen with the error and the only think I can select is updating firmware to the flash link which I did. Please help.

limite de flash atteinte

Fri, 09 Nov 2018 11:58:25 +0000

Je passe mon evo all de mon audi a5 a mon nouveau audi q5. Le module de programmation me dit limite de flash atteinte. Qu est ce que cela veux dire. est-ce qu'on peut le debloquer

Merci

Luc Ostiguy

Flash Link updater firmware update stuck at 1

Wed, 29 Aug 2018 00:58:31 +0000

Went to update the flash link to the newest firmware version. Update never moved past 1% after an hour and now the flash link says there was an error when doing last update and so it forces you to try again but it never gets past 1%. So now it will not connect to the evo-one to change settings.

Flash link update to firmware stuck at 1%

Wed, 29 Aug 2018 00:52:14 +0000

Flash link updater stuck at 1%. Will not connect.

Wed, 29 Aug 2018 00:51:04 +0000

Evo All not shutting vehicle down after brake is pressed.

Sun, 04 Mar 2018 13:34:14 +0000

I am only able to turn off the remote start by pressing lock x3, the brake does not work and allows me to drive with no keys. I have options A2-11 engaged. 08 Ford Escape hybrid.

flashlink manager error on gateway xp notebook

Thu, 11 Jan 2018 22:16:54 +0000

Flashlink manager software not launching on gateway ml6732 xp notebook. Says configuration error, reinstall.

Does EVO-ALL 3X Red LED flash always mean that it is not seeing the tach?

Wed, 10 Jan 2018 15:30:31 +0000

2017 Explorer with T-Harness plugged into OBD module. No other connections recommended in Tip Sheet. Hood pin disable since vehicle does not have one. Blue LED each time press Lock. After 3 Lock will light Red LED and it will come on followed by the Yellow LED but no response from vehicle. Blue LED comes on then sequence starts again. After several attempt the Red LED flashes 3X and process stops.

EVO-ALL flash limit reached

Fri, 15 Dec 2017 02:25:08 +0000

WHY?! I've flashed different versions while trying to get it work (maybe 5 or 6 versions) and finally when I succeeded with DCryptor I've got this message from FL manager.

I need to update it last time. Can anyone help?

What does "Reload Options" mean in Flash Link Manager?

Fri, 01 Dec 2017 21:05:59 +0000

When using the Flash Link Manager, what does the "Reload Options" button (next to save options) do? When using it, it seems to do nothing.

I have a feeling that if you reset the evo using a 'master reset' and then plug the evo into the flash link, the 'reload option' may reload the current options on the evo into flashlink. But just wanted to see if it was really it or something else.

Thanks

How long does it take for the firmware update? flashing lights.

Thu, 16 Nov 2017 20:48:19 +0000

Flash link manager seems to upload to 100% then show EVO-ALL update sucessful. Window seems to hangup on the pc. also the Blue flashing light on the Link and the Red flashing light on EVO-ALL are flashign back and fourth.

Flash-Link Updater gets stuck at 1%

Sun, 12 Nov 2017 12:30:25 +0000

Flash-Link Updater (Hardware ver.4, Firware4.03)

Evo-One (starter 7.1.20, Evo-All 2.4.18)

FlashLink Manager ver. 3.62

I'm trying to update the Flash-Link Updater to the latest firmware since I was having trouble connecting to my Evo-One. No matter how long I wait, it doesn't get passed 1% in the progress bar. It also does not detect my Evo-One when I plug it in. I have the latest version of the FlashLink Manager ver. 3.62 installed on my windows 10 pc. Is there a specific Java version that I'm supposed to be using? Any suggestions would be greatly appreciated. Thanks in advanced.

Flash-Link Updater gets stuck at 1%

Sun, 12 Nov 2017 12:28:31 +0000

firmware downgrade

Mon, 06 Nov 2017 11:25:43 +0000

HOW DO I DOWNGRADE THE FIRMWARE 4.18 TO 4.06 IN EVO-ALL. DOES NOT SHOW OPTION IN UPDATER

is it possible to use Flash Link Update 2 to update Firmware on Compustar Brain Module (IE CM5000)

Thu, 27 Apr 2017 18:58:07 +0000

Gooday Fortin Tech team,

1st of all, great product. Flashing evoall was super easy.

I am trying to install the evoall bypass in conjunction with Compustar Alarm and remote start CM5000. for the range and 2 way LCD. My CM5000 is a bit older, therefore I wanted to update the firmware and access it function thru the computer interface. I am aware that if I use Idatalnk flash updater ( ADS-Usb) it will be able to update the firmware on the CM5000. I was wondering if the Fortin flash updater can preform the same fuction as the Idata (ADS- USB)?

I don't really want to buy the idata ADS-USB just for 1 time use.

2015-Lexus-Rx350-push button start.

d1 inactive in flashlink manager

Sat, 28 Jan 2017 17:23:44 +0000

when checking evo-all status it shows d1 option active but off. upon going to options on flashlink manager d1 shows as inactive and does not allow the option to be changed from off to on. how can i fix this.

EVO-ALL - "Died" after flashing/programming - No LEDs/No Longer Connects

Mon, 02 Jan 2017 00:08:35 +0000

EVO-ALL - "Died" after flashing/programming - No LEDs/No Longer Connects

Updated a brand new EVO-ALL that came as part of a EVO-FORT1 kit to install into a 2015 Ford F250 pickup. After flashing and setting options/saving I connected it to the truck to program and no LEDs came on. Tried connecting back up to the updater, but it will not connect. Tried holding the programming button to do the normal reset but it shows no sign of life - Checked the connection pins and all seems fine. I grabbed another EVO-ALL I had on hand and proceeded to flash and program that unit without any issues. Could this be a bad unit that just suddenly died? I've never seen this happen.

No LED's on unit after initial install

Sat, 19 Nov 2016 12:58:56 +0000

I completed all the intall wiring on my evo one on a 2007 mitsubishi eclipse, updated the bypass and remote start and when I plugged the unit in, I didn't see and LED's light up at all. Tryed to program the bypass, no LED's. removed the unit and tried to check the programming on the unit and it all seems to be fine. Looked in the Questions on the support site, and found that perhaps a master reset needs to be done. I can't seem to get any response from the unit on the car to do anything so I can't get into the programming mode to reset and can't get the red light during the master reset. What can I do?

Ever wonder what the led's on the evo mean?

Mon, 24 Oct 2016 17:36:15 +0000

A simple and quick explanation!

What does E2 Run status mean in the flashlink manager?

Mon, 18 Jul 2016 05:43:42 +0000

That was the only setting not explained in the online instruction manual

Flash Link options A1-A11

Fri, 25 Mar 2016 23:42:53 +0000

I'm setting up my evo-all with NIS1 T-harness as a stand alone remote starter in my 2009 infiniti fx35.

In the guide it says to turn on C1 nad D1, and that inturn enables D1.6 and thats all fine. But am I supposed to have everything else turned off? What about A1-A11, these were all turned on before so I left them on.

What about D2? Would the guide specifically say I need to set this?

One more thing, I might add a smartstart module later, should I turn on this now in the firmware or should I wait?

Flash Link2 Unable to connect to EVO-ALL (red light goes dim)

Mon, 28 Dec 2015 14:20:30 +0000

Upon connecting my Flash Link2 to my first and only Fortin Interface module (EVO-ALL) I was disheartened when the flash link was unable to communicate with the Interface Module. Furthermore when the EVO-ALL is connected to the Flash Link2, the RED indicator LED on the Flash Link2 goes dim, and the computer indicates that the Flash Link2 has disconnected.

If I unplug the EVO-ALL from the Flash Link2 the RED indicator LED becomes bright again, and the computer indicates that the USB connection to the Flash Link2 has been re-established.

I contacted telephone support (English) and was instructed to reinstall the software to the Flash Link2. I have tried this on both company machines and my personal PC with the same results as described above.

Any help would be appreciated, Thank you in advance.

If the Flash-Link Updater does not recognize my module, is the module defective?

Sun, 20 Dec 2015 06:03:11 +0000

I just bought a brand new EVO-ALL and Flash-Link Updater 2. I followed the instructions exactly on the Flash-Link Updater manual in order to get the latest updates for my device prior to install. The Flash-Link powers on and lights up red but the module never lights up and the Flash-Link light does not come on showing a link to the module. Any option I attempt to choose results in a message that the device was not found. Is this brand new module defective? Is there any other way to test it or reset it? Thanks!

FlashLink Manager Device Driver will not install on Win 8.1

Thu, 21 May 2015 16:27:02 +0000

I installed the latest version of Flashlink Manager 3.52 on my Windows 8.1 computer, but the Device driver fails to install. When I try to manually install the device driver for the FlashLink2 in Windows Device Driver, I get an error that the device driver could not be installed.

Any ideas?