Questions & Answers - Questions récentes tagguées flash-link-updater-4

Update Error

Fri, 31 Oct 2025 01:23:47 +0000

infinity m37 2011 evo-all

the immobilizer light is on the vehicle instrument panel when the vehicle is started,

the remote start and operation are going well

I'm updating the body,

device flash limit reached, the current device cannot be flashed anymore

I'm getting a pop-up window

please tell me the solution

Flashlink4 software update error

Fri, 22 Mar 2024 09:31:45 +0000

Hello. When i connected my flashlink-4 updater (s/n 002504042363) to pc it showed version 4.02 and asked to update to 4.05. I clicked update. Then update started an hour or two it is at 1% and nothing changed. I reconnected module and then flashlink manager says- previus update error. When i click on software version it says- last version. Red light on module is on. I cant understand why it couldn't update?

Unable to update Firmware

Mon, 24 Oct 2022 17:59:12 +0000

When trying to update the EVO-ONE Software, several messages appear at the top right of the screen

-- Please update your FLASH-LINK UPDATER firmware

-- Please disconnect the EVO-ONE from the FLASH-LINK UPDATER before proceeding with the FLASH-LINK UPDATER firmware update.

-- Please select a Firmware Version

And the screen does not change status and does not update the firmware

Video

https://youtu.be/mrMiCEb32OY

RF Kit Acura TL

Tue, 30 Mar 2021 11:55:46 +0000

I am installin the RFK942 to my 2010 Acura TL. Will there be any additional wires that will need to be connected at or to my EVO ONE (besides the cable from the antenna)? Are there any features that need to be turned on on the Flashlink Updater and if so, where will they be found? Thank you.

Unable to update error message

Fri, 15 Jan 2021 21:16:25 +0000

Have an EVO ALL (date 9/2020 on back) and the Flash-Link-4 marked with Hardware Vr 4 , Firmware Vr 4.03 on the back. When I plug it into computer (Windows 10) with downloaded Flashlink Software, I get the following message:

An error has occured with the previous update. Please set firmware version to update the. (nothing after the)

Then it reads:

No update is available at this moment for the . (again nothing after the).

In the help menu of the program, I tried the Software Update - it says I have the newest version. I tried the FlashLink Firmware Update option - nothing happens.

Now what?

Thanks!

EVOONE firmware update menu - RF Enable

Fri, 08 Jan 2021 19:19:01 +0000

Recently got new EVO-one and RFK422 kit.

Where is the RF enable option in either BYPASS and/or REMOTE START tab?

what is the right steps to follow to ensure RFK422 remote works.

btw, evo has latest firmware.

Also if one was to by non-fortin brand remote (e.g. idatastart); is there any menu to pick remote brand/type? I have fortin brand RFK422 kit however, Just curious to learn more about the evo/fortin system..

Firmware update stuck at "Firmware Update is about to start"

Sun, 12 Jan 2020 12:56:40 +0000

I am having trouble updating the firmware on the FlaskLink Updater 4. I followed the instructions to download the Flashlink Manager on my Windows PC (Windows 10). When I pluged in the FlashLink Updater 4 it brought up a page that said to update firmware. It then instructed me to unplug and then replug in the device to begin the update process. I did this and now its been stuck on "Firmware Update is about to start" for the past hour. Please help!!!