Questions & Answers - Questions récentes tagguées flashing-leds

New EVO-ALL won't pass step one for programming

Sun, 13 Jul 2025 19:43:20 +0000

Brand new unit EVO-ALL won't pass step 1 for programming. All three lights flash in sync (not alternating) Do these units ship without any firmware?

rf6442w with evo one,remote program,red light under the yellow loop blinks red rapidly,

Wed, 11 Dec 2024 23:30:13 +0000

EVO one with RF6442w 06 duramax, goes thru the process of horn honking using the valet button, horn honks once to enter into program mode the light comes on steady under the yellow loop or the 4th led light, then it honks 5 more times and on the 5th honk it double honks really fast, i would assume to say hey im in program mode 5, then the 4led under yellow loop blinks red very rapidly and the blue LED does not come on the antenna, other weird thing is it won't connect to the flash link, so i can't go in and do a bug view, or look at the settings.. Talking with Robert today and he was saying the 4Th led should be on yellow to state in program mode. unless i misunderstood him

EVO ALL Stuck in Yellow and Red Light Flashing

Sun, 27 Oct 2024 00:34:31 +0000

Hello,

I am installing this on my 2012 VW Tiguan. I followed the process guide 92511. After decryptor and returning the vehicle, yellow and red LEDs flash, instead of staying on like explained on Step 13.

Now it says my unit (SN 001A07 559614) has recheaed its limit and I am really stuck.

Can you please assist?

Thanks,

Andrew

INT-SL+ not programming on 05 sequoia.

Mon, 15 Jan 2024 18:42:15 +0000

Int-sl+ not responding when hit the lock button. Red light just stays on.. no flashing, no nothing. Any idea? It's flashed to firmware 0.17

2014 Ford F-150, 2 Keys programming.

Thu, 02 Feb 2023 08:47:50 +0000

Hi there. I have one question about Ford OEM keys.I am trying to program a compustar module on a Ford F-150. I only have one OEM key and the other one is made by a locksmith (it's not a clone and it's not a copy) But I can't finish the programming because the module tells me that I am using the same key or a cloned key. My question is: does Ford split any code between two keys? If you don't have both OEM, is it not possible to finish the programming even if the key made by the locksmith is not a copy or a clone? I need some information about this. Thank you very much in advance. Kind regards.

2015 Chrysler 200 push to star

Mon, 28 Nov 2022 08:49:05 +0000

Hi there. I am trying to programm my Evo all, but I can't continue afer step 5 when press and release the programming button once, nothing happens after. The led blue should start to flash rapidly but only turn off. I have to conect the wire purple yellow to ignition pink white? Thanks in advance.

EVO-NIST1 - Yellow LED never solid

Mon, 24 Oct 2022 01:46:25 +0000

I bought my EVO-NIST1 from Amazon for my 2009 Infiniti FX35 (push to start and AT).

1) I followed the installation guide and connected the harness:

　- The keyport

　- OBDII

　- Brake switch

2) The white/black wire (A.19) of the harness is connected to the light blue wire of the push start　button

(Parking light wire (A.14) not connected at this time)

3) Insert key to the keyport

4) With the main unit, press and hold the programinng button and connect the 4-PIN datalink harness

(Other harness connectors not connected)

[Result]

I tried for about 3 minutes and blue, yellow, and red LEDs all blink together, not alternately.

Disconnect the 4-PIN connector (main harness) and return to Step 4) above and repeat, but yellow LED never solid.

Do I need firmware update my main unit?

I see below on my main unit:

Model: EVO-ALL

Date: 12/2021

SN: 001A07 338558

Wrong lights while programming 2015 Dodge Dart

Fri, 09 Sep 2022 20:57:09 +0000

Im using the evo-all with the CHR7 harness and flashlink. On step 7, the red led turns off and only the blue led is lit. The light will continue to stay solid blue if I attempt to move on to step 8. I've tried resetting and reflashing several times. I always get stuck at that step.

2015 Lexus IS 250 push to start remote start did work. but now yellow and red flashing on evo all

Fri, 28 Jan 2022 21:30:41 +0000

Everything was working perfectly til i tried to remote start again by lock ,lock, lock 3 times. Nothing happens but the evo all modules flashing yellow and red. TRY master reset and Dycrptor but Dycrptor said max reach. please help EVO-ALL SN# 001A07 252864

Flashing key on dash Acura RL

Sun, 12 Dec 2021 19:05:45 +0000

Hello,

I'm using evo-one and a omega OLRF42SST Omegalink 2-way remote, I have a 2005 Acura RL. The car starts fine, however, the key light on the dash is flashing whenever I use the remote start. It does not flash if I don't use remote start. Any help is appreciated.

Flashing red near programming button and module not responding to remote

Sun, 07 Nov 2021 16:22:57 +0000

Remote doesnt work after change car battery. Tried reprograming but not helping. Noticed red light blinking near programming button not the red with the other yellow and blue led.

What could be wrong?

Yellow, blue and red lights keep flashing when I plug evo-all in.

Mon, 12 Apr 2021 17:33:33 +0000

Flash unit using flash-link via PC. Even tried reset,.same outcome. SN: 001 A07 214660 Flash successfully. Status light change when trying ti program, but does not take program correctly.

3x lock, 5 red led blinks, no start

Sun, 10 Jan 2021 19:09:41 +0000

Infiniti M56x. I connected everything as instructed. Wire to wire and T-harness. During step 7 of programming both the red and blue lights up but the red light goes off. It didn't stay on until I press the start button twice. Am I supposed to press the push start button very quickly? I continued programming and dcryptor said it was successful. Plugged the fortin Evo back into the car. Press the lock 3x. The fortin blinks blue for each lock then blinks red 5x. All my connections are solid. I have the LINKR LT2 module connected also. Do I still select stand alone when programming?

The led cannot be solid blue in the first step

Sun, 06 Dec 2020 20:58:21 +0000

I bought a EVO-ALL and T-harness for my 2009 silverado 1500. I connectted the T-harness to my truck. I press and hold the button on then EVO-ALL, then plug the 4-PIN data wire to EVO_all. But the led on EVO-All cannot to be solid blue. So I have no chance to release the button. I waitted long time and tried sereral times. Same problem. So I cannot pass the first step when I tried to install it.

One more question, the EVO_All I got shows EVO_RS on the box, not EVO-GM. But the T-harness is Thar-GMt4. Is it the problem. Thanks,

no crank after 3 lock presses (blue led each press), red blinks 5x

Fri, 13 Nov 2020 19:14:53 +0000

System quit working after dealer flashed ECM. Updated flash-link and relearned key, but no crank.

INT-SL+ will not finish programming. The led does not turn off during programming (2002 GMC Sonoma)

Sun, 26 Jul 2020 00:44:38 +0000

I am trying to program INT-SL+ on 2002 GMC Sonoma however, when I get to Step 8, I start the vehicle as instructed but the LED never turn off. Just keeps flashing. I have tried several things - using the most recent firmware, old firmware. I tried Data-link, hard wired, I have double checked that the wiring is correct. Any advise on what I can do? Service number 002102 086504

when trying to program . I release the button on the blue led and all the light start flashing. Will not stay solid blue

Sun, 03 May 2020 14:21:00 +0000

2016 Audi A3 push button start- we have tried to reset all factors and we get stuck at the same spot every time

programmation cle

Sat, 14 Mar 2020 14:39:41 +0000

toyota highlander 2013 cle G

je rentre en progrmmation et les leds rouge et bleu eteind , apres le led rouge flash lentement !!

pas capable de programmer.

How to master reset or reprogram when red led flashes about 10 times and not once before inserting key in ignition?

Sun, 02 Feb 2020 10:57:17 +0000

When programming the bypass on step 4 where it says to press and release programming button 2x and red led will flash 1x the led flashes about 10x and then shuts off.. When i turn the ignition on nothing happens 07 civic, it was programed and working but i had to unplug module for some maintenance and now it won't reprogram... Can I master reset somehow?

Informational: Interfacing a flashing LED to EVO-ONE

Mon, 20 Jan 2020 03:23:51 +0000

I'm not a Fortin rep but someone might find this useful --

I wanted to interface a flashing LED to an EVO-ONE, and didn't want to use something like a "dummy" flashing 12V LED as this doesn't properly convey the status of the unit (arming/armed/valet) and my antenna doesn't contain it's own LED.

I ended up aquiring the following --

1- RFAXL202 kit, which is a pair of harnesses used to interface DEI anetnnas to the EVO-ONE with an XL-202.

2- A DEI 2v "super-bright" LED (either the red or blue ones. The blue LED is several orders of magnitude brighter than the red at the same 2v, if that's what you want).

3- A 220ohm resistor.

The RFAXL202 kit contains a four-pin blue plug with a single orange wire. I de-pinned the orange wire on the Fortin plug and inserted the pin from the DEI LED connected to the blue wire on the DEI LED in its place. I insertered the pin on the DEI LED connected to the red wire into the Fortin plug directly adjascent to the blue DEI wire that replaced the orange wire. I put a 220ohm resistor in series on the red wire on the DEI LED. The resistor is necessary because the EVO-ONE is outputting 5V on the pin used by the red wire and the DEI LED operates at 2V. This new plug will go into the larger of the two blue 4-wire plugs.

This will give a functional status LED that mimicks what would be found on an antenna or a conventional car alarm.

You can use a 12V, non flashing LED and simply connect the (-) to the orange wire on the blue plug from the RFAXL202, but I think this method of interfacing the LED is cleaner, and I find the appearance of the DEI LED housings to be aesthetically superior to a generic 12V LED when installed into a blank panel, etc. in a vehicle.

Red LED flashes 3 times

Sat, 11 Jan 2020 12:52:07 +0000

2010 Toyota Rav4, G Key. Everything connected, press the program button 2x, insert key turn to run and the red led flashes 3 times. Repeat programming and same effect. Does the yellow loop on immobalizer and the pink imi wires need to be cut?

F-150 2011 Key Programming No Blue Led Flash

Thu, 02 Jan 2020 14:54:37 +0000

Hi all. I have an EVO ALL with the Ford1 T-harness that I'm trying to install into my 2011 F-150 standard key for remote start. I have followed all the instructions and when I get to releasing on red + blue like the instructions state the programming does not go as described. The instructions say after putting key 1 back in I should get 10 blue flashes and 10 red flashes. In my case the truck locks and unlocks and then I get 10 red flashes only, blue stays on. After this, all LEDs turn off and pressing lock 3 times only makes the blue led flash and nothing else, no start. Any ideas? Thanks in advance.

Flashing Red LED After Programming

Sun, 22 Dec 2019 19:08:14 +0000

After first stage of programming the EVO-ALL with my Mazda 3 '15, programming with the computer, then following steps 1-12 again (Guide 62681), the EVO flashes RED with no other lights. I tried following all steps again a few times, with the same result. The security light on the car rapidly flashes for a few seconds as well. What should I try next?

Evo installation module keeps flashing blue,red and yellow LED lights while programming.No solid blue LED light.

Thu, 12 Dec 2019 12:27:07 +0000

Evo installation module keeps flashing blue,red and yellow LED lights while programming.No solid blue LED light.

Installing evo module on dodge journey 2010.The blue, red and yellow LED lights keeps on flashing and does'nt stop. Might need flash link, please help!!

Red led flash 3x and no start. What am I missing?

Wed, 27 Nov 2019 16:45:25 +0000

2013 f150 evo-all installed with T-harness. The only conneciton i made myself was the keysense pruple/yellow on the t-harness to the yellow keysense on the 20pin connector.

Programmed for lock-unlock-lock. Blue LED flickers when i hit lock or unlock. and then the red led flashes 3 times and doesnt start. No other response or light on my truck. It still started fine with regular key. I also tried using just 3x lock in case but same problem.

What am I missing? I didnt make any other connections like the hood pin because it looks like they are optional.

Thanks.

Audi q5 2012 red and yellow led not flashing alternatively, only red flashes. take data from vehicle.

Wed, 18 Sep 2019 02:00:41 +0000

the last step of data acquisition is to wait till the red and yellow lights flash alternatively. i wait then the ignitio cuts off and starts again and only red light is flashing, no yellow.

Starts but wont wait for the grid heater to come ON

Fri, 25 Jan 2019 20:40:45 +0000

FIXED AND WORKING almost, now with a diesel mode D1.3 selected and flashed and saved checked 3 times the truck will start but didnt wait for the grid heater to come on started right away!!!!

LOOKS like I have to downgrade firmware to 0.36 only need to know if this can be done without a master reset?

ford explorer 2015 wont program the keys, lights stay blue and red, never flash or turn off

Sun, 25 Nov 2018 15:55:35 +0000

i have a 2015 ford exploder, i bought the evo all for it and the flash link, have all the connections and wires connected as stated in the wiring diagram, install the t harness and made my connections to the obd wires can hi and can low,, plugged in the 4 pin power connector, stopped the lights at blue and red installed all the other connections, did the key program as directed key 1 key 2 and then key 1, nothing ever changed on the module, lights stayed continuosly lit up, the only that ever happened was when key 1 was insterted for the 2nd time the doors locked. no lights ever changed on the module and the keys never programmed.

i have the 3 button setting set on the flash link program

2014 F150 - ignition stays on after removing key at end of programming

Sun, 28 Jan 2018 00:19:48 +0000

OMEVOALL with THAR-FORD1 harness. EMEVOFORT preloaded. Hardware date 12/2017.

Module is not programming correctly.

Blue and red lights come on.

First key goes in. Blue, red lights on.

First key out. Blue and red

Second key in. Blue, red, yellow lights on.

When second key comes out, the ignition thinks the key is still in and on the "on" positon (blower and dash lights are one even after key out). Dash says, "Factory Keypad 11359." However, the car doesn't have a keyless entry key pad. All electronics are stock. No aftermarket options. When the second key comes out, the, back to just blue and red lights.

First key goes back in. Lights flash ten times. Then blue light. Then none. Key comes out. ingition behavior back to normal. Remotes work normally. No lights on EVO. No remote start functionality when pressing lock 3x.

Please advise.

Excursion Red and Yellow lights won't go away

Mon, 22 Jan 2018 18:53:58 +0000

I wired a evo-one into my 2003 ford excusrion trying to used the decryptor and learning the key the modules red lights will not go away. i have checked the wires 4 times and cant figure it out.

2015 Mazda CX-5 EVO-MATZ1 red LED after 3x lock press

Sat, 13 Jan 2018 23:18:49 +0000

Hello, I am installing EVO-MATZ1 on a 2015 CX-5 Touring. I have properly followed guide #62951. I do not have the parking lights hooked up, nor the hood switch via the dark blue wire from the EVO-ALL unit at this time. The CX-5 does not have a hood switch. Once I get the remote start working, I will install the included hood switch. The unit is programmed properly by following the instructions and getting the proper LEDs.

When I hit the lock button 3x, the redlight automatically comes on. Then the yellow light, then they both turn off. It does this again, then the lights stay off. Thats the first problem I have encountered.

The second issue I have is I did a reset by holding the programming button and programming the unit. Now whenI plug in the 4 wire power harness, all 3 LEDs blink. I tried to reprogramit but I am having problems. When I turn on the ignition, I do not get a yellow light on the first key.

Programs correctly, lock 3x's - Blue LED flashes and then Red LED's flash

Thu, 11 Jan 2018 19:41:46 +0000

I clearly didnt do something right and would love some help -

Installed/Programmed - Receive blue LEDs when pushing lock three times. Red LED flashes 16 times, but car doesnt start. What am I missing? What did i break?

Its a series of red LED flashes after the initial blue flashes when hitting the lock button on the fob -

Blue, blue blue

red

red, red

red

red

red

red

red

red red

red

red

red

red red red

Programs correctly, lock 3x's - Blue and Red LED's flash

Wed, 27 Dec 2017 16:30:43 +0000

Installed/Programmed - Receive blue LEDs when pushing lock three times. Red LED flashes a few times, then the Blue LED flashses three times, but car doesnt start. What am I missing?

Car clicking and interior lights flashing sometimes Evo-Nist 1

Thu, 05 Jan 2017 14:05:33 +0000

I have a 2009 Maxima which I installed toe forin combo 5 Evo Nist 1. I followed along a youtube video. I installed the unit. The only wire I had to tap into is the keyport brown wire using the white black wire, plus obviously the harnesses. The starter works. When I initially installed it, it seemed to work fine. THe lights worked on the unit as they are supposed to. When I put pannel back on and opened the door there was a rapid clicking I couldn't tell if it was the starter or a relay, but it seemed to drain the battery quickly. I took it out thinking there was an exposed wire. I didn't see anything but added extra tape on everything repositioned the unit. Put it back together seemed fine until the next day I opened the door and the same thing happened. Any thoughts?

Lights on module flash one at a time. Red, yellow then blue over and over

Wed, 28 Dec 2016 19:05:28 +0000

This is all after it installs fine and works fine for like 10 starts then this happens

at toyota 4runner flashes security LED

Sun, 27 Nov 2016 18:00:40 +0000

today I installed key-ovverride-all at 2010 toyota 4runner. If start the machine with the remote starter, flashes the security LED and does not switch off. If drowning out the car and then start again with the key, then extinguished...???

LED TÉMOIN DE PROGRAMMATION ET STATUS D'ALARME ARMING/UNARMING

Tue, 22 Nov 2016 12:49:18 +0000

Pouvez-vous me donné les informations pour brancher le LED PROGRAMMATION (témoins d'alarme qui est à l'intérieur du boitier en arrière au côté du bouton programmation),de façon à le brancher à l'extérieur du module EVO-ONE sur le LED situé au dessus de mon compteur RPM de la Mini Cooper 2009, merci à l'avance pour l'info...

Note: S.V.P. ne pas me réécrire de faire installé (par un technicien qualifié est recommandé) parce que c'est moi qui leur explique comment faire, j'ai vraiment dépassé ce stade avec la formation que j'ai au court de c'est longue année d'expérience acquise! (La note est pour M.Mathieu Bertrand Collin).

S'il n'a pas de responce pour corrigé ce petit problème je vais ouvrir l'appareil et me braché à l'intérieur du module EVO-ONE, oublier la garantie j'en n'ai pas besion.

Fortin Evo One red and yellow flashing

Wed, 02 Nov 2016 11:29:45 +0000

I have a evo one and using a t-harness for my 2015 Subaru WRX Limited Manual transmission. I go the wires all hooked and Im not sure if I was able to get the initial programing done correctly. I was doing this at work and needed to get home despite being unsure of it being programed properly, started my car and drove home. I tried doing the initial setup with the red and blue light being solid. Now the module has a solid blue while blinking red and yellow at the same time. Is this a concern ? What should I do if it's not correctly setup.

during programming at the end all three led lights are flashing

Thu, 04 Aug 2016 22:03:27 +0000

2004 infiniti i30 cheched all wiring good. solders have good connections. soild clean groung. use connection one and program 1 good power source and ground. will not take program. at the last step all the light flash together. dont know why?

Programming procedure 1- get solid yellow for 10 seconds then all 3 start flashing

Mon, 14 Dec 2015 15:13:38 +0000

I can't get past step 1. I let go of button on evo-all once I have the yellow led. About 10 seconds later all three led's flash simultaneously.

Tried resetting the unit several times and still doen't work.

Cannot move on from this step.

Thank you for your assistance.

LED color description?

Fri, 13 Dec 2013 18:39:39 +0000

I apparently programmed evo all succescully... Flshing lue led and all. Now whe i click the lock the blue led blinks as i do it. Then nothing happens. I use the key to start the car and yellow comes on and stay on till the car is off. Is this ok. What it means? Thanks .