Questions & Answers - Questions récentes tagguées gmc

GMC TERRAIN 2019

Mon, 23 Jun 2025 09:01:59 +0000

HI plaese any help i fix evo all with gmt6 harnes for gmc terrain 2019 i have 2 keys oem already only 1 key its working for remote starting but the second key its working fine on the car but the starting remote not working any solution to make both keys working thanks for all

03 Yukon. Unable to remote start when vehicle goes to sleep

Mon, 14 Nov 2022 18:20:27 +0000

Prostart and evo all installed on 03 Yukon. Remote starter and door locks works fine except when vehicle sits and goes to sleep. I have to unlock the door with the factory remote to in order to remote start the vehicle. Only the factory remote will unlock the door when its in sleep mode. Any help will e appreciated

2019 GMC 2500HD RF641 no lock or unlock but start function works

Sat, 18 Dec 2021 11:14:42 +0000

2019 GMC Sierra 2500HD diesel WT 3x lock and factory remote works fine. Installed the RF641 kit and remote start works but lock and unlock do not from the RF kit key fobs.

EVO-GMT7 installed with T-harness.

2008 GMC Sierra 3500HD remote start works good but now the key will not start the vehicle

Fri, 05 Nov 2021 12:20:06 +0000

I did not hook up any additional wires only the harness is this maybe the issue?

Do I need two keys for a 2018 GMC Sierra 2500 Diesel

Thu, 04 Nov 2021 01:12:55 +0000

Hi, I"m Looking at adding the fortin Evo all to my truck and i wanted to confirm two things. Firstly when i go to flash the module it says for the T harness THAR-GM5 but fortin gives you instructions for the t harness THAR-GM7 and theres not option to select the GM7 only the 5 could i still use the 7 and flash it as the 5. My second question is do i still need two keys to program or would i be able to just use one

Car goes off after 20 seconeds the goes on.

Sun, 12 Sep 2021 09:44:14 +0000

I have Yukon 2005, I install on it EVO All + excalibur 70X when I start it by remote (OEM,Excalibur additional remote or from door lock switch) a car still working for 20 seconds then goes off and automatically started again, This problems stay for 3 times then a car switched off, I make reflash a Fortin but same issue, I replace it with Excalibur 70B also same issue, I checked all wiring every thing in good condtion.

But if I start a car by Key it's working fine without any issue.

This issue suddnly happend with me started before 3 weeks from now but before it's working fine.

Car battery is new I replace it before 5 months.

There is any thing need to check it more? please I need help, also I install same devices for many cars I don't face same this issue with any car excepte my car.

Please check this issue on YouTube I uploaded a video for this issue:

https://www.youtube.com/watch?v=qFL4xSWzhvM

2014 GMC Terrain not starting with 3x lock

Mon, 03 May 2021 13:12:59 +0000

Installed evo-all stand alone remote start through step 11 correctly and received flashing blue at the end. Updated options including turning on 3x lock and bypass hood safety. Saved the options. Flashed the unit. Tried to start by 3x lock but did not start. The unit flashes blue and still able to use the remote to unlock the vehicle. What have I missed?

2009 GMC Sierra shuts off as soon as the key is inserted into the ignition. Evo all with t harass install.

Fri, 05 Mar 2021 22:10:16 +0000

Remote start fine but engine turns off as soon as key is inserted

2020 GMC SIERRA 3500 Diesel

Thu, 24 Dec 2020 12:36:43 +0000

Will the THAR GM 7 work using the guide# 91061 on a 2020 diesel? I'd suppose it's the same wiring and programming of a 1500 just turn on diesel mode maybe?

Wont start with remote and killing battery when pressing lock button 3x.

Mon, 21 Dec 2020 08:58:32 +0000

2013 gmc terrain

Dycryptor have reached maximum limit

Sat, 12 Dec 2020 11:41:57 +0000

limite atteinte du dcryptor gmc sierra 2020

model: evo all

DATE 08/2020

SN: 001A07 149723

2019 savana powerlock control off evo all

Tue, 14 Apr 2020 09:54:56 +0000

Will the evo all control the factory door locks on a 2019 gmc savana van through its canbus wires or do i need to make connections from the alarm/start module directly to the bcm?

Issues With THAR-GM7 in 2016 Sierra 3500 (guide 91291)

Wed, 11 Mar 2020 21:28:40 +0000

THAR-GM7 EVO-ALL and Crimestopper RS4-G5 (datalink; only wires other than Datalink connector from the starter are power and ground because for some reason the starter would not work off the power provided by the DLC)

Module programmed fine.

Remote start worked several times in a row right after install.

Fast forward to next day, delivery of vehicle--remote start worked one time. After that, the ignition would power up but would not attempt to crank. Tried a dozen times, checked plugs. Then the dreaded "service immobilizer system light" came on the dash and I just about S**T a brick. At that point I tried to start with the key--no crank. Wait 30 seconds, thankfully it started up.

Reprogrammed module (decryptor process and all) Remote start works fine a dozen or so times, I send the customer on his way. Get a call back within an hour that it's doing all kinds of weird things--locks are acting strange (randomly locking/unlocking) remote start will sometimes work, sometimes not. The weirdest issue is that when he starts with the KEY, drives around, stops, turns the KEY off, the truck will continue running UNTIL the brake is depressed.

Could this be a firmware issue? I'm just reviewing the installation manual and it mentions "modules manufactured between certain dates" enable option E5. When I read this during installation I assumed that it was referring to the vehicle manufacture date, not the module. I don't believe the module was manufactured almost a year ago or more, as it came packaged with the THAR-GM7 which just became available.

My 2011 GMC Sierra won't start by key with just the T harness THAR-GM4 completely plugged in.

Mon, 17 Feb 2020 12:04:13 +0000

With the T Harness plugged into both connections without the EVO-ALL connected the key will not start the engine. If I disconnect the CAN Bus connecter and reconnect the factory CAN Bus connecter the truck starts by my key. So I guess my question comes down to does the EVO-ALL have to be plugged into the T Harness for me to use my key? The harness is THAR-GM4

Wiring diagram 2003 GMC Sierra 1500 Standard Key, EVO-ALL, STANDALONE

Sat, 01 Feb 2020 18:53:17 +0000

Hello,

I have Evo-all Guide #61111 for GMC Sierra 1500 Standard key, but this is for Regular Installation using separate remote starter and Data-link.

I need the guide for a Standalone installation where the EVO-ALL is the remote starter with no data-link. Or I need the rest of the pin-out for the 20-pin connector. The pin-out does not indicate the corresponding pin for the main connections?

What is function is: OUT A5 / IN A6 / IN A7 / IN A9 / A10 / OUT A11 / A17 / A18 / A19 ??

Example, the RS7 OUT - Starter (+). No 'Ax' corresponding designation for 20-pin connector, is A6 - starter, A7 - Ingition2, etc?

Please advise trying to install EVO-ALL as standalone remote starter in 2003 GMC Sierra 1500 with Standard Key, factory alarm, no heated seats, or heated mirrors, flashed with 70.18 firmware.

2008 GMC 2500HD EVO one Decryptor limit reached for vehicle.

Tue, 31 Dec 2019 15:08:53 +0000

I have to reprogram my evo one for my gmc truck again, i keep getting the following message..."THE DeCRYPTOR HAS REACHED MAXIMUM LIMIT FOR THIS Vehicle" service #002B01 006047 can someone please help me?

What settings for 2003 GMC Sierra Diesel - EVO ONE

Fri, 20 Dec 2019 12:01:37 +0000

Have the EVO-ONE and FLASH-LINK 4.

Couple of things:

1. Want to set up for remote start with factory key (lock 3x). Do I have to add a RF-KIT to this? If not, do I have to choose one in setup? In Wizard mode, seems to force you to pick a RF-KIT.

2. Truck is a diesel. Found the Pro Mode in settings. Is there anything special regarding Tach or any other settings for diesels that I need to change?

3. The install guide recommends version 70.26. It default wants to install 70.18. When I go to look at other available firmwares, it does not offer 70.26 as an option. (70.28 is the closest). Any reason to not install the latest firmware (70.39 is the highest at the time I write this).

Thanks,

B

Fortin EVO-GMT6 remote start not working after following guide #77231

Sun, 24 Nov 2019 19:05:14 +0000

For starters, my car is a 2018 GMC Terrain with push to start.

I followed all of the instructions and wiring exactly, even with the help of crutchfield, and for some reason the car is still not starting up when I press lock 3x. When I press the lock and unlock buttons the evo-all unit led blinks blue, but that's it.

Can anyone please help me resolve this issue? Any help will be greatly appreciated. Thank you in advance.

2010 GMC Sierra Hybrid won’t remote start

Sat, 21 Sep 2019 22:21:08 +0000

Installed remote start using all instructions. Downloaded the fortin flash link system to update and program and the truck still does not start. It seems like the hybrid system turns on but nothing else. It also sometimes locks al doors and unlocks. Then it is giving an error message to service the security system (used a different word but same idea) and alarm goes off.

GMC ACADIA EVO ONE SERVICE THEFT DETERRENT SYSTEM

Tue, 04 Jun 2019 23:23:16 +0000

i install evo one with RF642W evo antina to GMC acadia 2007 SLT full option with power up/down window , i did all wiring as show in installation guide and wire color , car start once with the remote , as soon i put the car key and turn to run possition the car turn off and show a message SERVICE THEFT DETERRENT SYSTEM , then car will not start after that until i disconnect the unit and relearn the main key in car for around 30-45 min , i re done the programming again and the key dcryptor as well and as soon the car run from rf antina or 3x lock when i put the key in car to swith to on it is show same error , any advice what could be error in programming or wiring !?

SN:002B04 005896

Gmc terrain 2012 Solid yellow led is not coming in programing mode

Sat, 02 Mar 2019 23:05:39 +0000

I have bought evo gmt 1 with T harness , I updated it to latest firmware 70.35 with plash link, bit whe i try to program solid yellow light doesn’t come. Please send information about setting of bypass

2007 GMC sierra classic body style using EVO-ALL?

Sat, 02 Feb 2019 15:54:03 +0000

I am wondering wich year i should select for aquiring a connection/installation guide for a 2007 GMC sierra classic body style. Half way through 2007 was the model/body style change for this vehicle. When i am selecting the year it will give me options for 2003-2006 or 2007-2013. I am assuming i will go with the 2003-2006 option as this vehicle is the classic body style and would consist of the 2003-2006 wiring systems.

Remote Start + RF Kit = What am I missing?!

Fri, 25 Jan 2019 12:35:29 +0000

Hello,
I have a 2003 GMC Yukon XL I am trying to install a remote start on. We have the Evo-One, RF kit RF641W, and Flash Link Updater. I cant get the remotes to program. Im not seeing any installation instructions except for the bypass module: Guide 61101. Ive performed installation. It wont start.
Is there an installation guide for the remotes?
What am I missing?

Any help would be appreciated.
Thanks

evo-gmt1 will not operate

Tue, 25 Sep 2018 06:03:04 +0000

Hello, I have a 2017 GMC Terrain. I just installed the evo. I get a blue light on interface, but vehicle does not start. I do not have a hood pin or the valet toggle switch connected. I do not want either on my vehicle. I have the flash link and have installed what is reccomended on your website. What is wrong with the unit?

Remote Start does not turn on in 2017 GMC Terrain

Fri, 25 May 2018 19:09:32 +0000

Problem: Does not remote start. Blinks blue once after hitting lock and 3x lock. Hold down lock and blinks twice. Blinks/flashes blue twice after unlock.

Connectors:1 ignition connection, 2 Key bypass immo connector, 3 OBDll Dk. Green to brown can sw C5, 4 At Parking Light switch Lt. Blue to brown white A14

C1 Enabled D1 Enabled D2 Enabled A11 Disabled A14 Disabled

29081 Stand alone EVO-All GM FLIP KEY

Service No:	001A06 783034
Preload date:	48-2017
Hardware version:	6
Firmware version:	70.31
Recommended version:	70.32
Vehicle:	GMC TERRAIN 2017 - STANDARD-KEY
DCryptor:	DCRYPTOR HAS FINISHED PROCESSING THE DATA. THE MODULE HAS BEEN UPDATED AND IT IS READY FOR USE.

Key still works, but remote start does not function with EVO-GM1

Sun, 14 Jan 2018 20:36:59 +0000

I'm trying to install my EVO-GM1, and I've looked at the instructions that come with my remote start and I've looked at the instructions on the website. Everything is plugged, the decrypto was ran, and the firmware was updated, but the remote start does not work. Am I supposed to cut wires or anything?

How can I get the lights back to working in the rear hatch on a 2008 GMC Acadia

Thu, 28 Dec 2017 10:31:10 +0000

What color is the power supply and ground coming into the rear hatch and loaction of a 2008 GMC Acadia and is there a fuse somewhere going to this power supply? I was trying to see if I could get the tag type back up camera to work on this vehicle and there was a red wire coming out of the camera wire not hooked to nothing that got aganist the groung and that is when it went dead along with the lights in the hatch. The other part of the red wire still has power when you put vehicle in reverse. but the red wire hanging loose and the lights in the rear hatch has no power at all, I have checked every fuse in the car and especially the camera fuse and they are all good even tho it seems like I blew a fuse when the loose red wire sparked aganist the ground while I was moving wire around. At this point if I could get the lights back to working correctly in the rear hatch I could do without the camera. Pleas help

Eddie Cansler

EVO ALL NO Crank but Ignition

Sat, 14 Jan 2017 20:44:45 +0000

Hello

Whenever I try to use remote start with my viper 5806v and the Evo all, All i get is ignition. After about 35 second the ignition comes on and everything looks normal.But there is not even a single crank that is produced.Ive wired using D2D and Everything besides remote start work wonderful, like unlock, lock and trunk.I have changed the remote starter to automatic mode and turned the Tach sense to off but Nothing.Out of my 100 attempts it has not even cranked once.Thanks

2011 GMC Sierra 1500 Remote Start Lock X6 WHY?

Tue, 10 Jan 2017 00:19:49 +0000

I installed my GMT4 System and was super easy to install and program BUT I have to press the lock button on my oem remote six times not just the three as described. Also can I stop the horn from honking all six times when using remote start option? And Last but not least how do I know from 800ft away if my truck has stopped after the six pushes of the lock button. Really need to get this to three times lol.

Can Door Status be changed to Driver Door status only?

Tue, 09 Aug 2016 20:37:25 +0000

I see the EVO-ALL has an output for Door Status for an 08 GMC Sierra. I assume this will output when *any* door is open. Is there an option to change it so only the driver door open will trigger the EVO-ALL?