Questions & Answers - Questions récentes tagguées heat

Remote start no heat

Thu, 28 Nov 2019 20:23:20 +0000

Hi,

I just bought an evo-all with fort 3 harness for my 2017 F-150 2.7leb. Remote start works well and I enabled climate control and rear defrost with Forscan, but climate control center is dark and off until I insert the key. Climate control is manual. Tried all settings no luck. What am I missing?

Heat not working when remote started turns on after key takeover

Mon, 07 Jan 2019 10:15:31 +0000

Hello, I have a 2016 impreza with standard key ,using evo one remote start works fine but the heat doesn't work. It will go on for a second after starting but then shuts off, it turns back on when I put key in ignition , before I press the brake. Any ideas? Thank you

Can heat/AC be wired in to come on automatically in 2013 Ford Fusion?

Tue, 17 Jan 2017 08:48:20 +0000

I have a 2013 Ford Fusion SE, and I've installed the EVO-ALL (EVO-Fort2 package) unit and I'm wondering if there is an accessory wire in the white 20 pin supplied plug that can tap into the heat sensor on the lower kick panel to the right of the steering column? I've seen people do this on YouTube in the 2014-2015 Fusions with the same Fortin starter but it's never stated which wire to use with the supplied plug. Is this something that can be done or is it something in the options menu that needs to be turned on? Thanks

Remote start doesn't turn on dash lights or air conditioning/heat

Thu, 05 Jan 2017 22:07:31 +0000

Hello all. I have a 2005 Infiniti G35 (automatic; not intellikey, not push start) and I just installed a Fortin EVO-ONE with the NIS2 T-Harness and a Compustar Slice Remote. I can lock, unlock, release the trunk, and remote start/stop the car. My problem is that when I remote start, the A/C does not turn on (and neither do the dash lights). I have to physically insert my key and turn it to on in order for the A/C to turn on. Regarding connected wires:

A8 (Dk. Blue) (- GRW) is not connected to anything
A15 (Pink/Black) (- Hood pin) is not connected to anything
D6 (White/Red) (Security light) is not connected to anything
D4 (White/Green) (Security light) is not connected to anything
Lt. Blue on the T-Harness isn't connected to anything
Lt. Blue/Black on the T-Harness isn't connected to anything
I cut the security light wire in the g35 (identified via wirecolor diagrams). The wires aren't connected to anything.

Is there anything I'm missing or do I have to turn on a specific setting via Flashlink Updater 2 (which I have)?

Thanks in advance for your help.

How can I turn on the heat seat and the rear defrost when I remote start a Fusion 2015?

Fri, 26 Jun 2015 13:04:53 +0000

I have an EVO ONE installled in a Ford Fusion 2015 standart start and I was wondering how can I activate the front heat seats and de rear defrost upon the remote start as those fuction are listed as supported by this module.