Questions & Answers - Questions récentes tagguées hyundai

2007 Santa Fe refuses to learn immoblizer EVO ONE

Tue, 30 Dec 2025 19:10:03 +0000

Trying to Pair immobilizer to evo one on last step and refuses to learn and flash yellow light, TImes out after about 15 minutes and flashes red.

It did learn before when temporarily hooked up, Checked wiring and all is correct. Reflashed firmware and reset module with alternating lights.

Getting proper can Voltage on both wires at Evo connector and all other pats wires

2018 Sonata Push Start T-Harness?

Thu, 28 Aug 2025 04:16:42 +0000

Is there a T-Harness available for a 2018 Sonata with Push-to-Start? THAR‑ONE‑KHY8 implies so, but only one Hyundai model is listed.

2022 Hyundai Accent - Std-Key-without-Keyless

Sun, 05 Jan 2025 20:27:35 +0000

I have a 2022 Hyundai Accent and two options appear. I don't know what they mean.

Std-Key-without-Keyless
Std-Key-with-Keyless

Hyundai Elantra 2016 Evo-One with Standard Key PATS

Sat, 28 Dec 2024 22:40:04 +0000

Canadian version with the immobilizer and harness THAR-ONE-KHY2

Firmware updated to latest.

Programing process completes. Yellow LED method

Question I have is....

I'm not clear with what the manual means by cutting.

A20/D4 and A10/D6 from the blue PATS ~ wire....

A10, D6 and the blue PATS ~ is tapped into the blue PATS ~

A20 to D4 is connected together...

Did the manual mean I have to use A10/D6 from the blue PATS ~ wire by breaking the connection of the blue wire from the connector

side then connecting it back to the blue PATS ~ using A20/D4 back to the blue PATS~ ?

Is this what I am supposed to do?

I am in step 1.evo-one hyundai Tucson 2020

Sat, 21 Dec 2024 19:46:42 +0000

I really need help! I connect the module while pressing th button and only get a red ligh no blie no other light ko blinking.
it has been a week trying to solve bit no answer and the instrucctions are soooo confussing. Can somebody PLEASE help me!

Hyundai Elantra GT 2017 - MS3G app not working properly.

Mon, 21 Oct 2024 23:40:16 +0000

Hello, I have the MS3G app on my Samsung. My car starts perfectly, but the 15 minutes timer no longer appears, I no longer have notifications and the 3 circles beside the car image no longer have anything showing one the car starts. Shows in the left upper corner as "layout empty". Background app refresh is on, and notifications are on as well. I have tried de-installing, clear data, clear cache and rebooting my phone. Thank you!!

2012 Hyundai Sonata PTS - No ignition control - EVO All

Mon, 20 May 2024 01:20:25 +0000

2012 Hyundai PTS

Fortin EVO All with Fortin LTE

Connected all wires as per installation instructions. Bought Flash link and flashed to 17.31 following the wizard. Programmed Frotin Evo module to vehicle(blue LED blinks rapidly). When pressing starting lock 3x - module sounds internal relay is clicking and parking light flash however dash ignition does not come on. Checking EVO all diagram - RED Connected D2 yellow/blue start+ wires goes into 1n4004 diodes - strip facing towards PTS button - then to yellow/black and yellow/orange. ignition does not turn on.

Disconnected the diodes to measure direct and yellow/blue wire for voltage output...getting zero volts when remote start is requested. Tried to reflash Fortin 4 times and still have not been able to get voltage output from d2 yellow/blue.

I am missing something or is there internal module fault?

2019 Veloster PTS Manual, Bypass wont program

Mon, 30 Oct 2023 21:38:14 +0000

2019 Veloster PTS Manual. Wire to wire according to https://fortin.ca/download/98741/EVO-ONE_IG_RTO_BI_KHY8-VELOSTER_2019_PTS_B_98741.pdf

Bypass wont program when ignition is pressed twice.

Any advice on troubleshooting would be greatly appreciated.

2019 Elantra PTS, unable to program CanBus to Evo-One

Mon, 30 Oct 2023 14:14:23 +0000

Installed Evo-One on a 2019 Hyundai Elantra PTS. Verified wiring many times. When it comes to programming the module, all goes well till it’s time to program canbus section. I get it to the point the red led is flashing 5X then pauses. Push the PTS button twice to turn on ignition for canbus programming and nothing. No red led 10x then turning to blue. Any ideas into why this is happening would be great. Can usually get these figured out, but no luck here. Car has 2 different canbus hook ups, one at the obd connector and one behind the fuse panel.

2019 Veloster PTS Manual 3x Lock Evo One

Tue, 13 Dec 2022 20:58:24 +0000

Getting conflicting information from local installers. Would prefer not to have an extra remote but if need be I will purchase one. 2019 Hyundai Veloster Push to start Manual.Looking at installing an Evo-one Will the 3x lock start work? Can I set the ready mode without another remote? Any help appreciated

2013 Hyundai Accent

Wed, 07 Sep 2022 21:05:21 +0000

Hi there! I am having the next problem. When installing the Evo one on my 2013 Hyundai Accent the blue programming light turns off when I turn the car on and the light comes back on when I turn it off have the can wires on the right ones do I need the can wires to use the remote start? What options do I need to change the serial number of my evo one is 002B04 247461 The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65. Could you help me please, what going on? Thanks you

Mode pret a partir (hyundai veloster manuel)

Sun, 05 Dec 2021 12:22:23 +0000

Comment ce mettre en mode pret a partir avec une transmission manuel?

Problem for instruction installation - 2013 hyundai santa fe evo one

Mon, 22 Nov 2021 23:21:37 +0000

Is no possible to information how installing evo one to 2013 hyundai santa fe push to start- i try on ios, google chrome, opera , iexplorer ... still no succes

How to use the turbo timer for 2015 Hyundai Veloster? (PTS)

Tue, 30 Mar 2021 12:28:42 +0000

How to use the turbo timer for 2015 Hyundai Veloster? PTS

Evo One won't start after 5 min or so but was working right after key bypass programming procedure

Thu, 25 Mar 2021 20:31:33 +0000

Hi, I'm kind of lost here, nobody seem to have the answer to my problem, not even Fortin when I call them for help. I installed my Evo One on my Hyundai Tucson 2020 standart key start, followed exactly all the wiring as per the guide, double check all my connection (EMS, CAN BUS, ignition wires, etc) and there's no loose cable. After that I did the key bypass programming procedure with EMS cable : hold down program button while plugging the 6 pin heavy gauge wire till it was red, plug all the others wires, press 7 times program button till it flash 6 times every second, put the key in and turn to ON. At this point the red led flashed 10 time quickly and after stayed on while the blue light started flashing quickly too. After that I turned Ignition to OFF and every light turn off. Right after that I tried to start the car by pressing LOCK, UNLOCK, LOCK and the car started no problem. I then stop the car, close the door and wait...

5 min later, I tried to restart the car with the remote starter but it didn't work. The car got the lock unlock lock signal but no light is flashing on the module anymore like if it went into sleep mode or something.

I tried many thing and here is what I found out :

- If I unplug all cable from the Evo One and plug it straight back it then start receiving signal again for the next 5 min or so.

- If I open the trunk and close it back, the module seem to start back receiving signal from oem remote.

To me it feel like there is a cut off or something that stop the module from receiving any signal from the oem remote after a certain amount of time, kind if it was to prevent from draining the battery of the car.

Could also be that the Evo One is loosing the key programming after current shutting off in the car but then it shouldn't start by just unplugging and replugging the 6 pin ignition wires.

*Sorry if my english is not perfect, I usually speak french.

2019 Hyundai Veloster no clutch wiring diagram

Fri, 08 Jan 2021 09:48:29 +0000

There is a 4 pin plug at the clutch, 2 of them look black and the other one is red and other is white. Which one do I need to tap into and what wire do I use on the evo all 20 pin connector?

2013 hyundai santa fe ignition on but no crank

Sat, 26 Dec 2020 18:54:56 +0000

Remote start is in and programmed. Evo all is programmed. 2013 hyundai santa fe push to start. Hit lock button 3 times, ignition on vehicle never cranks. I have rechecked all connections and they are good. At the end of the evo-all programming it says the red led should flash 10 times, then blue should flash fast, then red flash fast. Then turn ignition off. The red flash fast never happens. I dont know of that's related or not.

Evo-One vs Evo-All

Sat, 26 Dec 2020 11:46:52 +0000

Hello,

Bear with me, I'm new to this. But I have a 2016 Hyundai Elantra standard key, that I am looking to have a remote starter installed in. I was recommended to this site but I have no idea what the differences in the models are. The two that came up when I searched my car were the EVO-ONE and EVO-ALL so my questions are:

1. They are both able to remote start, so what are the major differences between them?

2. What is a t harness and why would I need one?

Thanks in advance I appreciate the help :)

EVO ONE + EVO-START2 TUCSON 208

Sat, 19 Dec 2020 15:28:53 +0000

J'ai fait l'installation du EVO ONE et du module EVO-START2. Le problème que je rencontre est que les commandes par l'application ne fonctionne pas avec l'EVO ONE. J'ai une confirmation exemple au démarrage de l'auto qui confirme auto démarrer mais il ne se produit rien sur l'EVO ONE.

Du coté de l'antenne, je vois la réception de msg (clignotement vert) et la confirmation (led orange) mais rien ne fonctionne.

EVO ONE fonctionne avec le 3x lock pour la démarrage. Une idée?

2017 Hyundai Tucson Limited, remote trunk fob does not function Evo One

Sun, 06 Dec 2020 17:21:47 +0000

2017 Hyundai Tucson Limited, power lift trunk does not function during remote start. Key fob makes yellow park lights flash no open, push button on rear trunk and the gate lifts a 1/4 of the way and stops, push the trunk button on the dash, the trunk opens all the way.

Guide # 62161 shows how to wire and the setting used. Guide # 97941 does not explain trunk option. Did the trunk option die?

Updated to latest 76.59

Thanks for your time and help

Blue LED goes out during bypass programming

Sun, 08 Nov 2020 15:47:33 +0000

2008 Hyundai Sonata Evo-One doesn't have PATS wire so I didn't use red connector and light blue wires from 20 pin connector. I finished all the wiring and checked it million times. When I press programming button and plug the 6 pin connector, let go on blue, connect 20 pin, antenna, valet, and can bus, put the key turn to on position LEDs go out.

I tried turning on option 20.2 but when I plug the 6 pin connector all lights flash then they go out and nothing. I'm I missing something?

EDIT: Turned out my antenna was faulty, everything works great now.

Hyundai Sonata evo all stand alone no start

Sat, 10 Oct 2020 19:37:03 +0000

Hi any one have any issues installing a evo all stand alone on a 2011 sonata push start?
it started once right after programming but now it just turns on the evo all does some clicks and the red lights flashes 3 times I double checked all the wiring and everything is correct, I also noticed the ignition is not turning on when you try to remote start. I tried a another evo all and same thing started once after program and then does the same thing.

thanks

Klaxon après démarrage - Santa Fe 2019

Tue, 08 Sep 2020 11:49:53 +0000

Santa Fe 2019 - clé régulière

Après le démarrage de la voiture, que ce soit via l'application evo start 2 ou avec le 3x lock, la voiture émet un son de klaxon, comme quand on appuie 2x sur le bouton pour verrouiller les portes. Est-ce possible de désactiver ce coup de klaxon dérangeant à chaque démarrage de voiture?

Merci

Wires seem miss-labeled in 2015 Sonata PTS instructions

Wed, 15 Jul 2020 14:36:48 +0000

Wire colors labeled differently on 2 pages for CAN1, description section says blu/wht install illustration has yel/brn

2015 Sonata PTS horn wire location

Thu, 02 Jul 2020 22:24:26 +0000

Hooked up an RF kit to evo one but there's no honk when locking/unlocking and panic doesn't sound. Looks like I need to connect the horn wire from module to vehicle's (-) horn trigger, so does anyone know which wire it is for 2015 Hyundai Sonata PTS.

How do I hardwire the brake for EVO-ONE in a 2010 Hyundai Accent (Guide #60801)?

Wed, 29 Jan 2020 21:09:03 +0000

Have additional questions regarding answer (by Derek) to original question; both posted below for clarity...

1. Had already tried reversing the can bus wires (no effect) and the option 20.2 in the remote starter was already set by default. What would 20.n be if it was not 20.2?

2. Do all default settings assume I have PATS data wires?

3. How do I hardwire the brake? The only place brake is mentoned in the #60801 guide is in "Vehicle functions supported in this diagram..." at the top of page 1.

4. I also purchased the two way RF system (haven't tried to hook up yet obviously). Will hardwiring the brake and/or setting option 20.2 affect the function of that system, particularly the feedback that tells you the car is running?

5. Answer below said: "By doing this you will skip the need to even program it on the blue light." Does this mean no programming at all is required? Should just start? Key is bypassed?

6. If the above doesn't work, is it time to send everything back?

BTW, I don't care about alarm. Just want remote start.

Thanks, Mike

----------------------

ANSWER TO ORIGINAL QUESTION

That is a typo in the troubleshooting guide. As the website states it is indeed a KHY1. I have corrected it.

You can try flipping the can bus wires see if that works. If it refuses to program I suggest the following.

Since you only get tach and frootbrake from the can bus, as long as your car is automatic transmission:

-Set option 20.2 in the remote starter

-Hardwire the brake.

By doing this you will skip the need to even program it on the blue light.

----------------------

ORIGINAL QUESTION

I used the troubleshooting guide associated with the #60801 installation guide on the flash link manager (says it is for thar-one-khy2 T-harness). The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65.

Crutchfield sent me a second one when the first wouldn't work in case thre was something wrong with the unit. Got the same results with both. Oh, and I did cut the yellow loop for the automatic transmission. Are there any bypass/remote starter options that I might change - or anyhing else for that matter - that might get this thing working or is it just not going to work on my car?

----------------------

Trouble programming a EVO-ONE for 2010 Hyundai Accent

Mon, 27 Jan 2020 20:14:54 +0000

Having trouble programming a EVO-ONE for my 2010 Hundai Accent. It has the thar-one-khy1 T-harness. Before programming I loaded the latest firm ware; 76.[54] for bypass and 1.[24] for remote starter. I loaded the suggested options for both and made sure the remote starter setting from teh install guide (2.2 and 32.5) were correct. The car does not have the PATS data wires (no imobilizer). I used guide #60801 to install and programming method 2. The blue light does not flash in step 4. Just goes out and will come back on when the key is returned to off.

I used the troubleshooting guide associated with the #60801 installation guide on the flash link manager (says it is for thar-one-khy2 T-harness). The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65.

Crutchfield sent me a second one when the first wouldn't work in case thre was something wrong with the unit. Got the same results with both. Oh, and I did cut the yellow loop for the automatic transmission. Are there any bypass/remote starter options that I might change - or anyhing else for that matter - that might get this thing working or is it just not going to work on my car?

Could you give me the complete EVO-ONE wiring diagram for a Hyundai Accent 2007?

Fri, 17 Jan 2020 16:02:31 +0000

Car is Hyundai Accent 2007, automatic.

installed on a 2017 santa fe works once and no longer works

Sun, 29 Dec 2019 18:42:04 +0000

I installed on a santa fe 2017, I did all the programming correctly, but when I go to the forehead it only turns on once after powering the module, after turning off and trying to turn on it doesn't work anymore, so if I turn the module off and on again it works for the first time and then it doesn't work anymore, does anyone have any idea what might be going on?

2010 Hyundai Sonata - For an EVO-ALL (not EVO-ONE) will T-Harness THAR-ONE-KHY1 be of any use?

Fri, 20 Dec 2019 17:01:35 +0000

Bought an EVO-ALL kit. Just wondering if the THAR-ONE-KHY1 t-harness will help with install, if it's even compatible.

Can you use the OEM Remote to unlock/lock after EVO-ONE remote start has been activated in Hyundai Tuscon 2018?

Wed, 27 Nov 2019 19:08:23 +0000

Looking to configure the EVO-ONE with a Hyundai Tuscon 2018 with OEM Remote, how will the OEM remote function after the car has been remote started. The guide says the remotes will not be operable during remote start?

Thanks!

2009 Hyundai Elantra GL manual transmission Wiring diagram please

Wed, 13 Nov 2019 02:44:00 +0000

Can someone pls help me find a wirinf diagram for 2009 hyundai elantra GL manual transmission. I can only find the automatic transmission wiring diagram. Any help will be appreciated. Thanks in advance

2013 Hyundai Santa Fe 2.0T, Push Start

Wed, 02 Oct 2019 20:15:18 +0000

Hi there, purchased used Santa Fe. Vehicle is equipped with E300 & EVO-ALL. Purchase of the vehicle did not come with Transmitter remotes. There is a FM antenna on the windshield. Safe to say there was a seperate remote other then OEM.

What replacement remote can I use? Or can I program current setup to OEM key? If not, can I replace it with new RF kit?

Thank you

IS AN RF KIT NEEDED WHEN INSTALLING INTO 2016 HUNDAI ACCENT STANDARD KEY W/ T HARNESS

Wed, 08 May 2019 13:29:01 +0000

I have a 2016 Hyundai Accent standard key Evo One with a t harness is a rf kit needed for installation

2016 Hyundai accent standard key Blue programming light turns off when I turn the ignition on

Tue, 07 May 2019 13:11:38 +0000

When installing the Evo one on my 2016 Hyundai Accent the blue programming light turns off when I turn the car on and the light comes back on when I turn it off have the can wires on the right ones do I need the can wires to use the remote start?What options do I need to change the service number is 002B07144688

Probleme de demarreur a distance

Sun, 28 Apr 2019 14:22:50 +0000

Mon auto ne demarre plus en pesant sur le bouton et le frein. Mais elle démarre avec la télécommande, je pèse sur le bouton avant, et s'éteint quand je touche à la pédale de frein.

Auto usagé avec evo start problème...

Thu, 25 Apr 2019 22:07:53 +0000

Bonjour, j'ai acheté mon Auto usagé au concessionnaire kia. Et l'auto vien avec evo start. Le code actuel est utilisé par l'ancien propriétaire . Donc comment retirer l'ancien propriétaire si j'ai zero possibilités de contact avec lui....?

Merci

EVO ONE wont start

Fri, 01 Mar 2019 07:17:52 +0000

I have a 2017 Santa Fe Sport 2.4 keystart and installed an EVO ONE with 3 lock start. First, the wire it says to cut in step 60, plug high behind fuse box is not grey/orange, it is white. The plug is not actually plugged into anything, just capped off. I flashed the unit with latest software. Everything is wired exactly as it says, except for ems com, since there is no wire. I programmed it as the instructions say, and it flashes blue. When I go to start the car, the blue light blinks with each push, but nothing. All connections seem fine, but still nothing. No horn, no flashing.

Will the Evo-One give me both push button start and remote start?

Thu, 03 Jan 2019 14:27:56 +0000

I have a 2017 Hyundai Sonata base model. I want to be able to remote start my car. I am under the impression that this product will give me the ability to both push to start and also remote start. Is that correct?

Is an RF kit needed when installing into 2017 Hundai Accent T key w/ T harness?

Sun, 11 Nov 2018 01:07:29 +0000

looking to spec parts for an install. not sure if RF kit is needed.

Would any functionality be lost without one?

Thanks.

hyundai veloster

Fri, 12 Oct 2018 10:50:02 +0000

Hello. Yesterday I installed the remote start and fortin evo key on the veloster. After remote start car monitor turns off. After removing the terminals from the battery, it works again. What can be? 3 years ago I also installed it on the veloster, the problem was not.

Hyundai santa fe sport 2017 take over not working

Fri, 12 Oct 2018 00:56:16 +0000

My vehicle remo My vehicle remote start normal ( oem keyfob). But after remote start, I press unlock on keyfob, the door not unlock ( parking light flash 2 times). So i press unlock on door. After entering the car,(OFF led is bright) I press twice Start button, On led not bright but vehicle still move. Please help me Thank

updated: i known my issue ,the voltage at CAN BUS when IGN ON as below:

can1 high~5.0v

can 1 low~0v

can 2 high ~2.5v

can 2 low ~2.5v

please help me fix !!!!

Can we do remote start on a hyundai 2018 ioniq plug in hybrid?

Sat, 17 Feb 2018 08:15:18 +0000

I no we can do a normal hybrid.but can we also do a plug in hybrid? Tha ks

2013 hyundai accent clée standard premier démarrage tourne mais bypass pas la clée evo-key

Wed, 29 Nov 2017 08:00:18 +0000

2013 hyundai accent clée standard premier démarrage tourne mais evo-key ne contourne pas la clé, au second demarrage le vehicule demarre normalement. Solutions?

Evo All - Brake Output Delay - Sonata 2015 PTS

Wed, 22 Nov 2017 11:42:56 +0000

I did an install on my Hyundai 2015 Sonata PTS with the Compustar CM7200 brain. Everything is functional but the issue that I am having is that upon entering the vehicle after a remote start if I press the brake the car stops a few seconds later as opposed to immediately. This is a big problem as sometimes I forget to press the PTS button twice after entering the vehicle and I press the brake to put it in gear and the car shuts off while the transmission is shifting gears into reverse. This causes the car to leap as if it stalled in gear and I can be certain this is not good for the transmission at all. I've usually done installs with iDatalink and it shut off immediately as soon as I put the foot on the brake pedal before I even have the chance to switch the gear. This is my first time using the Fortin with brake input using CANBUS.

Cranking but not starting

Sun, 06 Nov 2016 06:05:55 +0000

Good day. Ive just install Evo-One on my 2013 Hyundai Santa Fe Key Start and followed every wiring to be installed and programmed. Now when i remote start, all it did is cranking then it will stop. Can you help me with my problem. Thank you.

Update: Ive double check all the wirings again, everything is in its place. Try remote start, still cranking only. Now i also check the leds on evo-one no blue lights when lock-unlocked on oem remote. I think everything is mess up right now. Help pls. Thanks.

Lock and Unlock for Hyundai Elantra 2016 key start

Wed, 16 Mar 2016 13:34:05 +0000

Can someone help me identify where the lock and unlock on the Hyundai Elantra 2016 key start is? The wirecolor guide doesn't have it listed at all. Or is the only option to use the CAN for it?

Also, if there is a wire for lock/unlock or arm/disarm, does it go to sleep? How do we wake it?

Thanks in advance!

2013 Elantra PTS - EVO-ONE Won't Start

Sat, 09 Jan 2016 20:02:12 +0000

I installed a new EVO-ONE in my 2013 Hyundai Elantra sedan PTS. I soldered the wires instead of using quick splice wire connections. I double, triple, and even 10x checked all the wiring. I even called Fortin support because some of the wires on the standard install weren't the same color coming from the car, they said it's the wire position that's most important. I also purchased the Fortin RF remote kit. I bought the unit from eBay, the seller programmed the unit for the RF kit and the car.

I checked the parking light wire to make sure it wasn't +12v, once that was hooked up and knew that all basic install wires were connected, tried the remote start, and it did not start the car. The parking lights flashed 3 times, but did not start. Lock/Unlock/Trunk Release all work, but starter does not. I tried to check the various ignition wires with a multimeter at the harness plug, but I don't know if any are supposed to send +12v from the Fortin unit or not. I previously programmed the remotes and got the responses from the car that the instructions indicated I should get. I turned on the car ignition, got orange light on EVO-ONE. Locked the doors, the antenna started flashing blue, the EVO-ONE was flashing red. When trying to remote start, the EVO-ONE flashed red I believe, until the "did not start" signal came back to the remote.

Any help I can get?

EVO-ALL and 2013 Hyundai Elantra GT PTS

Sun, 12 Apr 2015 17:21:35 +0000

Good afternoon,

Bottom line up front: EVO-ALL won't start my 2013 Hyundai Elantra GT push to start.

Details:I recently purchased an EVO-ALL to use as a remote start solution, without requiring a separate remote starter add-on (the website shows I can use it this way for my vehicle). I also purchased a Flashlink unit to update the EVO-ALL to the latest stable/recommended version, without issues.

Using the Fortin diagram for wiring, it appears that several wires that would be connected to a remote starter simply aren't connected at all, such as the starter wire, parking lights, etc. I successfully programmed the EVO-ALL for my 2014 Hyundai Elantra GT, and connected the wires as per the Fortin guide. I also consulted the Wirecolor guide, which showed both those same wires that I connected, as well as the seemingly unneeded wires that would connect to a remote starter.

Using the Fortin install guide, I successfully programmed the EVO-ALL when it was connected to my vehicle, but it will not remote start my vehicle. When I push the lock button, the blue LED lights up. When I push the OEM keyfob 3x times, the red LED lights up, then the yellow LED lights up, then nothing at all. The vehicle doesn't start. No ignition, no crank, no start....nothing but LED activity on the EVO-ALL and door locks.

I've used the online troubleshooting guide, and that didn't provide any helpful solutions.

Do you have any idea why this might be the case? Are those wires that I didn't connect still required, since I am not using a separate remote starter? If so, how do I connect them? The Fortin install guide assumes the user has a remote starter, and doesn't provide wiring instructions for someone who is NOT using one. The Wirecolor install guide also assumes the user has a separate remote starter module.

Thanks in advance for your assistance with this. My wife is eagerly awating her birthday present!

**By the way....I have the exact same problem with a second EVO-ALL for my 2014 Hyundai Santa Fe PTS...same issue, same circumstances, same result (won't start). I didn't want to make another post for this one, but he service number for this EVO-ALL is 001A06430027.

Hyundai Santa Fee XL 2014, bypass delay?

Tue, 03 Feb 2015 12:33:01 +0000

I noticed that it takes longer started with the remote starter with the key. We can see that there is a time for the transponder bypass, while the starter crank. Also, my EVO-ALL has lost its programming after 2 month. I had to reprogram it. Have you heard of any problems like that?

Thank you