Questions & Answers - Questions récentes tagguées imo

install evo-all by imo-imi

Tue, 12 Jan 2021 14:44:33 +0000

In the summer I installed evo-all by "imo-imi" on 2008 camry. I can't find this instruction now. Where can I find instructions for installing fortin evo-all by imo-imo?

Lexus Es350 2010 Evo all alongside avital. this pin-out is incorrect for a 2010 ES350

Sun, 11 Nov 2018 20:36:58 +0000

Lexus Es350 2010 Evo all alongside avital. The IMI wire is color correct But the IMO and the harness looks different two Immobilizer wire Both Green also wire below pink and yellow are swapped this pin-out is incorrect for a 2010 ES350

Flashed for vehicle

D2D enabled

latest firmware installed

2018 Subaru Impreza Key start - Evo-one w/T-harness instruction about IMO wire.

Fri, 13 Jul 2018 15:35:45 +0000

THAR-ONE-SUB THARNESS INSTALLATION guide (Guide #64451) Rev20170427.

Page 3

"IMO wire On the green 20 pin connector"

RED/WHITE wire is not present on this vehicle.

Is there an updated instruction guide?

Thanks.

Update: 07/14/2018

I just found the IMO wire. It is the White/Lt.Blue wire on the 20 pin grey connector, on the back of the fuse box. WireColor.com lists it as the "Body Integrated Unit, connector Q, 20 pin connector, pin 14, White/Lt. Blue"

This White/Lt.Blue wire is much easier to get to than the "Red/White wire on the green 20 pin connector, on the Junction Connector" that is listed in the THAR-ONE-SUB1 THARNESS Installation guide, Rev. 20180627.

Maybe Fortin can update this Installation Guide to include a Note that says:

"if the Red/White Wire is not present on the Junction Connector, then use the White/Lt.Blue wire on the grey 20-pin connector on the back of the fuse box."

The installation was a success and the Remote works great.