Questions & Answers - Questions récentes tagguées kit

le tiguan 2018 ne demarre pas, la cle valet entourée de fils ne semble pas fonctionner

Sun, 25 Jan 2026 22:42:37 +0000

Quand on actionne le demarreur, on peut voir sur le tableau de bord qu'il ne voit pas de clé. il essaie 2 fois et barre les portes. les lumieres du vehicule flash 1 fois. J'ai 10 tours de fils autours de la cle valet.

Merci de m'aider

Winter setting with EVO One

Sat, 14 Dec 2024 15:50:30 +0000

Hello Fortin,

I have Mazda CX-5 2021 Kuro Edition. I purchased it recently. It came with EVO One preinstalled by previous owner. I dont know is there any specific winter setting because I setup weather condition like turn heating on for driver seat and steering heating. then turn off the vehicle but when I remote start the vehicle it just fan thats turn on heated seat and steering get turned off. my goal is here it retain the setting when i turn off the car.

Evo All w/ Evo Start no RF kit programming

Tue, 12 Dec 2023 12:48:15 +0000

2018 Ford Edge, Standalone Evo All install, and adding Evo Start. Can not get the Evo Start to program or "mate" to the Evo all. I do have temp, GPS, and bluetooth telemetry to cell via Evo Start but can not get any functions to work via cell app. Programming, I have tried hold program button, plug in black data, release on RED AND BLUE, push till RED AND BLUE, release while constant RED AND BLUE, ignition ON...but do not get the quick flash of RED AND BLUE w/ YELLOW ignition led on. Can you please guide me to what my issue is PLEASE? Remote start via factory lock unlock lock works along with door lock/ unlock like it should. Located in the eastern states. THANK YOU IN ADVANCE ! ABSOLUTELY LOVE THE FORTIN BRAND AND PRODUCTS.

I bought an evo one, it worked perfectly with the original wear

Wed, 09 Nov 2022 17:25:48 +0000

Hello, I installed my evo one and it worked perfectly, but I know a lot of distance I didn't turn on so I bought the RFK441 kit. I installed it now. My car doesn't turn on either with the control of the kit or with my original key. I disconnected it and set it up again with only the key but it doesn't do anything to

Is RFK912 available for FlashLogic FLRSCH4?

Tue, 16 Feb 2021 02:16:56 +0000

I want to install RFK912 on Chrysler vehicles. Can it be used with the installed FlashLogic FLRSCH4?

Flashlink manager EVO-ONE - missing RFKit programming option

Thu, 21 Jan 2021 11:22:09 +0000

When connected EVOONE to flashlink manager; Do not see "RF kit compitible" menu under "REMOTE STARTER" tab.

Any reason its not visible?

keep failing programming RF641W on EVO ONE

Mon, 18 Jan 2021 21:21:12 +0000

I completeted module programing and tried to program RF641W but kept failing. When entering the mode there is no horn chirping even pressing the button 5 times. Also the antenna led stays off after pressing brake pedal. Kept trying and all of a sudden the LED for RF programing turned red solid. Even when connecting flashlink, it failed to connect with the RF programing led stays on while there was no issue conneting it a couple hours ago. Any advice would be appreciated.

RF-Kit install on FOR2 T-Harness

Tue, 08 Dec 2020 08:27:56 +0000

Is it possible to install a RF-Kit on a 2018 F150 with a EVO-ALL standalone and THAR-FOR2? If yes how can I do it? I saw some guides that show how to wire pwr and gnd but non for the 2 remaining wire. Thanks

how do I program RF642W fobs to work on Evo-one?

Sat, 01 Aug 2020 13:05:25 +0000

i have installed an Evo-one on my 2019 mazda cx5 and the OEM key fob 3x lock start is working fine. I have also included the RF642W when i programmed / flashed the module. I am not sure what to do next to make the rf kit functioning. i am a bit confused with the quick guide. I dont get the same response from the system (as stated on the guide) when trying to do the steps on programming the fobs. not sure what I am missing.

no option h2 on 2011 kia sportage evo one

Wed, 22 Jan 2020 17:07:44 +0000

programming evo-one for 2011 kia sportage,push start ,trying to add fortin rf kit fmh series,asks to select option h2 on program by-pass option,but its not there in the programming prompts for the evo -one? I have an evo all here and it will show the h2 option,but will i need a remote starter kit as well as the rf kit and evo all ? or will it stand alone(evo-all + rf kit?)

IS AN RF KIT NEEDED WHEN INSTALLING INTO 2016 HUNDAI ACCENT STANDARD KEY W/ T HARNESS

Wed, 08 May 2019 13:29:01 +0000

I have a 2016 Hyundai Accent standard key Evo One with a t harness is a rf kit needed for installation

EVO-START2 and EVO -ALL

Wed, 30 Jan 2019 21:01:58 +0000

Now that I have my EVO ALL with THARNESS working on to the next step adding a EVO_START2 with a RFA2A adapter. The install diagrams are really not good, the antenna cable has 2 ends and a ING+ yellow wire. The RFA2A has 3 connectors and red black for power that is not needed???So which connector goes to what? The diagram really suck SORRY FORTIN. I think you have female and male connector mislabled a male has pins exposed and female no pins just sockets. Does anyone have pictures on the few connections I have to make

how to Add RF kit to EVO-All are already activated or need to re-flash and

Thu, 24 Jan 2019 15:33:40 +0000

I have EVO-ALL working in my Dodge caravan 2016. Now i bought Fortin RF kit RF-641W do i need to reflash my module to add RF kit or its already activated?

The antenna doesnt seem to be recognized

Thu, 22 Nov 2018 13:41:23 +0000

I cant seem to link the RF Antenna to the Evo One. Is there something I'm missing? Is there a specific firmware update I need? 2008 Toyota FJ Cruiser.

Evo One can't Program Compustar G9 2 way

Tue, 17 Jan 2017 10:17:21 +0000

I have an EVO ONE which i installed in my 2016 Tucson with the T harness. The wiring was minimal and straight forward, so I know it's all correct. It's just 4 CANbus wires, parking lights, horn, and ignition. The dealer I bought it from programmed it for a Revo 1.1(fortin2) but I couldn't get that to work. I followed the procedure for the valet button and brake pedal, the car responds and flashes the lights when it's supposed to, but wouldn't respond when pressing the start button on the Revo. So I sent those remotes back to the dealer to be replaced.

While waiting for the replacement remotes, I was at best buy and spotted the compustar 2 way system (RF-2WG9-SP). I bought it and ordered the flashlink2 unit online. First, before the flashlink arrived, I swapped the 4 pin wires and programmed the remotes with the EVO ONE still set to fortin2 and firmware 1.21, and the compustar remotes WORKED. I could Lock/Unlock my doors and hatch, as well as start the car. The car responds exactly as it should with the lights and horn. The problem is it only works as a one way remote. The blue compustart remote is supposed to be one way, but the orange remote is supposed to give me a 2 way response. However, at least I know all of my wiring is correct. So the problem is communications handshaking between the box and the remotes.

So my Flashlink comes in and i'm able to switch the options to firsttech from fortin2. I tried to program the remotes on mode 1 and mode 5, but no success. I tried to do a full master reset and flashed the firmware to 0.96. I set it to firsttech in options and tried to program on mode 1 but didn't work. So i did a master reset, set options to firsttech and tried to program on mode 5 but no success. So I set it back to fortin2 and it programmed on mode 5 on the first try. Everything works again except only as a 1 way remote.

Any ideas, I figured it would be straight forward to program this remote?

2 way lcd remote

Sat, 03 Sep 2016 12:41:17 +0000

Does anyone know of any 2 way remotes that have a lcd display that works with the evo-all? I looked at that compatible rf kit page but it doesn't have pics. Thanks