Questions & Answers - Questions récentes tagguées lexus

Remote Starter Take Over Option - Lexus ISF

Thu, 20 Nov 2025 15:15:21 +0000

Hello,

I'm looking for a 2 way remote starter which has the take over option (my ignition will stay running when I open my door) for a 2010 Lexus ISF. Do you offer this? If so, can you let me know which product/s I need?

Thanks!

Do I need INT-SL+ with 2008 Lexus IS250 or do I need Key-overide-All?

Thu, 02 Jan 2025 15:59:20 +0000

I have installed a EVO-ALL in my 2008 Lexus IS250, I got a INT-SL+ and followed those install instructions. I can't get the INT-SL to recognize the door lock from the door button. After further research, it looks like that module is only for domestic vehicles. It looks like I need the KEY-OVERIDE-ALL for imports. Can someone confirm? I found a specific install for the KEY-OVERIDE_ALL for the lexus, however its completely different than the guide than the EVO-ALL is showing.

I have also been unable to make the remote start work with the EVO-ALL. I got the RFK-411, data link connected it to the EVO-ALL, programmed the keys but nothing as far as remote start works. I

Lexus LX600

Mon, 22 Jul 2024 10:36:00 +0000

Hello. Does standalone (38-2) not work on Lexus LX600?

2009 rx350 key sense

Wed, 13 Dec 2023 00:38:01 +0000

i have installed EVO-ONE-942 and INT-SL+. The car lock, unlock, remote starts. Everytime i remote start the alarm set off. i follow Guide # 90081. i did hook up the key sense wire. but i didint see any 2 pin white connector shown in the guide. when i remote start the alarm set off so i have unlock and lock and the car stay running. if i cant find the key sense wire. can i change the setting to unlock before start then lock after?

2009 Lexus IS250 Evo One Install Help

Mon, 11 Dec 2023 12:10:26 +0000

I installed a Fortin Evo One in a 2009 Lexus IS250. I’m pretty confident that I have connnected all the right wires. The unit seemed to program right with the red light flashes and then blue flashes..etc.

So my concern is if I really need to use the optional module for the door locks? My plan was to use the OEM remote, but the remote starter is not activating with 3x lock. Do I really need the additional door lock module for this to work? Also, on the programming side, if I go to “wizard” mode it only shows “no oem remote” and can only pick an RF kit. If I go to “pro” mode, I’m able to pick 3x lock….etc. I’m worried that this is causing me an issue also. Can someone please help? Thanks!

2007 Lexus GS350 - Issues with INT-SL+ recognizing door locks

Sun, 15 Oct 2023 00:33:12 +0000

I just wired up my EVO-ONE to my 2007 Lexus GS350. I followed the guide and ended up having to go through all the wiring diagrams to confirm which wires were correct. Just a heads up if you wanted to update the instructions as all the wiring is correct from the photos but most of the colours didn't match the vehicle and wiring diagrams. The photo shows an Avalon interior so that might possibly be why they are different.

I updated the EVO-ONE and INT-SL+ to the latest firmware and chose the correct year/make/model. I was able to program my key to the EVO-ONE with no issues, but I am unable to get the INT-SL+ to recognize when I press lock on the driver door. I've connected it to the same wire shown in the instructions (~door lock data) however mine is red in colour.

Is this the correct wire to use or is there something else I can try?

Thanks!

2016 Lexus is350

Mon, 23 Jan 2023 14:59:06 +0000

I got to the point blue led blinking with the ignition on, after turn off the ignition the blue led keep blinking, suppose to go off. Redo the step couple of times, and refrashed as well but never work. Always with the blinking blue and the remote didn't work.

Lexus ES300h 2017 lights flash 4x and doesn't start

Fri, 30 Dec 2022 14:26:05 +0000

Using evo all and rfk942 on 2017 lexus es300h. hybrid, pts.
Installed using harness and connected white/black to purple wire on start/stop switch.

Programmed without issues, dcryptor ran fine. Able to lock/unlock using both OEM remote and rk942 remotes.
When trying to start (with either the oem or rk942) the parking lights and the red led on the evo all flash 4x.

Have tried:
a11 hood switch off, reset and reflashing, tested all connections. confirmed D4, D6 enabled.

Instructions say this means ignition before start. Not sure what is meant by this. The French translates to ignition key detected before starting? I have placed both OEM keys at a distance and tried the rk942 to start and got the same result.

lexus lx 500

Wed, 07 Dec 2022 13:41:39 +0000

Hello. What manual is suitable for 2022 Lexus LX500 (diesel) for evo-all (standalone)?

Autolights, foglights and high beams stopped working after installing EVO-RS TOY6 on 2017 Lexus NX200t

Sun, 20 Feb 2022 20:32:47 +0000

Just installed EVO-RS TOYT6 (EVO-ALL + TOY6) on 2017 Lexus NX200t for OEM remote start (3xLock) and works fine. The only issue is that autolights do not work (lights do not turn on even if it's dark outside) and foglights do not work, either.

EDIT: Also noticed high beams won't turn on, either. The "symbol" indicator shows up on the dash but the physical beam lights do not turn on.

Anybody has a fix for this?

2008 Lexus IS250 EVO ALL unit with just a standalone remote start. (PTS)

Fri, 17 Dec 2021 09:54:35 +0000

My question is simple,

Guide # 99541)

States that we need to install the INTSL for door locks... But if im installing a unit with just CS RS unit... 1 button, do i really need it? Does anyone know if the OEM needs to see unlock first before starting the car?

Can someone also confirm, this setup will be ok for the bypass and tach etc... main page say no but the guide says it does.

TIA

2008 Lexus RX 400H will not stay running .. shuts off after 5 seconds

Thu, 02 Dec 2021 08:57:52 +0000

I put in evo one in a 2008 Lexus rx400h it starts up but shuts off after 5 seconds then starts again.. also cannot get SL+ to program for locks and trunk

using rf kit aswell

2018 lexus ls 500h

Wed, 01 Dec 2021 12:39:11 +0000

Hello. I am installing evo-all (standalone) on a 2018 lexus LS 500h (hybrid). Which guide should I be using?

Lexus RX350 2009 Firmware in Manual is not an option in Flashlink Manger 4

Sat, 05 Jun 2021 23:47:35 +0000

I have Flashed the INT-SL+ with 0.17 via the instalation manual Guide#90081

It says to load Firmware 79.65 to the EVO-ONE. The highest option available is 79.56.

I cannot get he INT-SL+ to program to the car via the lock button.

The EVO-ONE will learn the key and flash red 10x, but when I go to the next step to hold the programming button on the INT-SL+ then connect connector 1 and keep holding while connecting connector 2. The Led is supposed to light up, but nothing happens.

Evo-Start 2 Doesn't Lock or Unlock

Sat, 05 Jun 2021 17:31:54 +0000

2015 Lexus GS350

I Just instaled the Evo-All and Evo-Start 2, the install was very straightforward, no problem using Decrypter. The car Locks, Unlocks and Starts via 3x LOCK on OEM Fob, and it starts from the App, however doors wont lock or unlock via App.

Does anyone have any troubleshooting steps I should try? The Evo-Start recieves the command but nothing happens on the car side.

EVO-ALL with THAR-TOY6 not turning on car

Mon, 08 Mar 2021 22:12:03 +0000

Working with an EVO-ALL using a THAR-TOY6 harness on an automatic 2016 GS350. Was able to program the EVO-ALL with flashing blue light at end of process but does nothing when I press LOCK button on key fob three times. When I turn on car EVO-ALL shows yellow light. Tried resetting the unit and re-programming it with same results. Also double checked 3 connections (1 going to start button, and 2 going to can hi & low).

Does the evo one have an auto lock when I walk away setting for the 2017 Lexus NX200t?

Tue, 09 Feb 2021 18:53:53 +0000

I'm looking to install the EVO One on my 2017 NX 200t, does it have an option to auto lock after a certain time or if I walk away? Also, do I need anything else to be able to control it with my phone?

3 X Lock engine start on 2001 lexus ES300

Mon, 25 Jan 2021 07:19:54 +0000

Working on a 2001 Lexus ES300 and using guide #58481. Is there an updated version of the software which will support the 3 x lock to start the car without using an additional fortin remote kit?

Thanks.

Why is my auto start starting for about 10 sec, turning off and back on again to do the same thing?

Tue, 05 Jan 2021 17:14:33 +0000

I have put an Evo key-overide-all and an Autostart in a 2001 lexus es300. Wired everything up and vehicle turns on normally and shuts down fine with the key fob however if I leave the vehicle running it shuts down and restarts after about 10 seconds.

Gone over wiring and everything is good. Double check programming on the Fortin but there are no changes to be make to the key overide. Only the update but there override is up to date.

Thar-Toy6

Tue, 22 Dec 2020 13:56:36 +0000

2017 Lexus NX200T with Evo-one and Thar-Toy6. So do I use the A 30 pin or the B 30 pin connector. And which other wire ends with clip ins do I use? I don't care about the color. If this harness was made for my car like it is supposed to, I would like to know which wire ends to use. Thank You

Evo start2 app not communicating with car lexus rx350

Sat, 28 Nov 2020 16:19:53 +0000

I'm using the EVOone with Evo start2 in my 2016 lexus rx350. The car starts fine with the oem key fob but i can not get the evo start app to start the car. the lights on the antenna flash green a few times and then goes amber whenever i send a signal from my phone but nothing happens to the vehicle. I connected the yellow ignition wire to the other yellow wire on the thar-toy-6 and data 4pin is plugged in to correct port. Am i missing something?

2017 LX570

Thu, 15 Oct 2020 13:28:54 +0000

i have 2017 LX570 with factory remote start but the car turns off when i unlock the door which product i can use to keep the car running when opening the door and drive

Can’t find wiring behind glove box for 2011 GS350 remote start

Fri, 09 Oct 2020 12:15:56 +0000

Just having an issue trying to find the ECU plug behind the glove box on the pass side.
I think I found it, but it doesn't have the same colours in the provided diagrams.
im going to just start testing the wires themselves, but just wondering if anyone else has had the same problem.

2019 lexus NX300

Mon, 15 Jun 2020 14:35:14 +0000

The instructions for 2018 and 2019 Lexus Nx300 are the same, right?

2014 LEXUS RX350 EVO ALL , EVO ONE DOES NOT WORK

Fri, 17 Jan 2020 13:39:24 +0000

2014 Lexus rx350 made in canada ,evo one , evo all not working

All connection correct ( guide 76891), program modules ok ,blue led blinks ,door lock unlock and luck ( for disarm) , and no ignition-cluster is dark ,engine no crank .I try 2 evo all and one evo one and still this same problem. All Modules 2019 year.

whats wrong??

Prostart two way RF kit with evo-all

Tue, 29 Oct 2019 12:22:50 +0000

does evo-all works with prostart rf-kit? Canadian tire sells prostart two way rf-kit and I'd like to add this to my evo-all which I installed on my Lexus awhile ago.

2008 Lexus IS250 Evo-One Starts for 10 secs then shutsoff, starts a 2nd time and shuts off again

Tue, 08 Oct 2019 12:14:06 +0000

Installed using Guide # 57231. Everything works as it should but when remote starting, car starts for 10 sec then shuts down. Tries a second time but same results.

2008 lexus es350 streeng lock +

Tue, 27 Aug 2019 01:23:15 +0000

checking the guide #2891 for evo all for my 2008 lexus es 350 and I am unable to find the 10 pin connector on the BCM. there is a 10 pin connector there but the shape is completely different from the pictures. lookinh for streeng lock + wire. I found the 20 pin connector and its underneath the streeng cover not to the left.

is connecting start/stop wire mandatory if I dont wanna use the idle mode? I couldnt find that connector as well. is it behind the push to start button? if yes that is really hard to access to that connector.

lock/unlock wire in Evo all schematic GUIDE # 8431

Thu, 22 Aug 2019 16:05:32 +0000

I'm installing the Evo all in my 2008 lexus es350 but the schematic diagram is not clear for A2 and A3 wires (lock and unlock) it only shows arrows but it doesn't show where to connect them? what features these two connections add to the remote starter? Im using the module for 3x lock botton start for now but I'd like to add a RF kit later to the module later on. Thanks

Ignition 1(positive) wire location for 2006 IS350

Mon, 24 Jun 2019 12:58:22 +0000

Hello-

The wirecolor.com pinout instructions indicate that there is a blue wire in the driver's side cowl kick panel for the "Ignition 1 (positive)" wire.

On my vehicle (2006 IS350), the wire in this location is solid black and I'm concerned that it may not be the correct wire...

Is there a way that I can confirm the wire in my vehicle is the correct wire for this pin?

From wirecolor.com (the wire in question is "#58 - Ignition 1 (positive)":

Notice that the wire in the guide is a blue wire. Also, the other remaining wires don't appear to correspond to the color of the wires in my vehicle.

From my Vehicle:

Any help, guidance and assistance is greatly appreciated!!

Thank you in advance!

Can't find new Lexus Ct 200h 2018 in vehicle list

Sat, 22 Jun 2019 13:00:43 +0000

Hi guys , i write from Italy, i wanna buy the evo-all for remote start my new car and as a security alarm.

In the vehicle list i can't find the Ct-200h 2018 , you have 2017 compatibilty but i cannot find the new restyling made in the end of 2017, my car is the new restiling ( january 2018).

Another question : the manual of evo-all installation for the ct-200h 2017 says : *compatible remote start required, the evo-all is not enough to remote start the car? i have to buy an additonal remote starter? Thanks

Thanks

Lexus Gs350 and Evo One +INT-SL+ no work

Mon, 29 Oct 2018 23:22:41 +0000

Lexus GS350 2009 year North America ,Evo One + INT -SL+ no work

many times check connection -all is ok,program module ok ,problem is no start ,no reaction for teach INT SL to door lock -red light onn module stil light ,no flash rapidly .no reaction ,no start.

+12V diffrent color ,no black ,is white/red

IDLE mode on Lexus

Mon, 08 Oct 2018 13:18:58 +0000

What is a 'IDLE mode' is a optional connection on LEXS 2013 ES. What is that use for?

07 ES350 Wont Program - light stays solid red after final step

Wed, 20 Dec 2017 17:49:36 +0000

Installing an EVO One on an 07 Lexus ES350 per the regular installation with takeover instructions. I have all of the wires installed correctly with good taped up connections. However, when I go to program in the final step, the light blinks red (appears to be about 15 times and not 10), then stays solid red. I have checked the ignition connection several times and it is solid. Prior to installing this model, I had an EVO All installed with this same ignition wire and it was working fine. The only reason I wanted to swap models was for the take-over capability. Any ideas?

CAN wires on 2015-2016 lexus LX570

Tue, 05 Dec 2017 15:12:42 +0000

Today I installed evo-all (stand alone) on LX 570, according to scheme 2016 (in the VIN code, the tenth digit was 5). CAN wires I connected to BECU (30 pin connector, green and white). Behind the glove box somehow could not find the remote start connector. Everything is working fine. I need to find and transfer these CAN wires behind the glove compartment or leave as is?

2017 Lexus LX570 doesnt turn off when open door and car restarts after 4-5 seconds

Mon, 11 Sep 2017 14:23:02 +0000

i have installed evo one in lexus lx570 2017. its starting with 3xlock but its not turning off when opening the door and car instantly restarts automatically.

2007 Lexus GS350 (+)Ignition Wire

Tue, 10 Jan 2017 00:29:09 +0000

Trying to install Evo-One. Instructions only say connect to ignition(+) at fuse box. WireColor chart only shows (-) Blue wire at fuse box. Is this just a mistake? Other manaufactures show a ignition(+) at the brake switch, but also say this requires a diode to be put in place. Instructions show the connector for the start button, but not which one to use at the fuse box. Fuse box has multible blue wires.

Also not real sure about the location of the Blue wire in the Parking Light Harness.

S/N 002B07 147486

EVO ONE doesn't have Lexus RX330 in the vehicle support list that's in pdf guide

Mon, 09 Jan 2017 06:09:32 +0000

Hi.Need module to be able to install remote starter on my Lexus RX330. If I go through the main filter on a website it shows EVO ONE supports lexus rx330 for for remote start. However when I download the guide for EVO ONE it doesn't have lexus rx330 on the support list. So Does EVO ONE really supports lexus rx330 2006 for the purpose of a remote start. If yes what other acessoaries I need to buy from Fortin and from other parties?

2011 ES350 Evo All 3x, factory alarm sounds when exiting the vehicle after shut off

Mon, 05 Dec 2016 19:05:49 +0000

2011 Lexus ES350 EVO All Stand alone 3x start works perfectly, however since install, the factory alarm sounds when the driver door is opened after driving the vehicle. This occurs even if vehicle is not remote started. Owner states they've never heard the alarm before.

Edit: Added Service Tag to post and ordered a flash link updater.

Best system for 2007 Lexus GS350 PTS

Sun, 13 Nov 2016 17:32:25 +0000

Hey guys,

With winter just around the corner, I wanted to get my 2007 Lexus GS350 PTS fitted with a remote starter. I've purchased the EVO-All for my 2009 Accord in the past and used it with a ProStart 2-way system without any issues. However, this time around, I want to program my OEM Lexus key fob to start the car.

Is this possible? If so, what module(s) would I purchase?