Questions & Answers - Questions récentes tagguées lt2

Linkr lt2 + Evo All

Tue, 19 Jul 2022 03:35:12 +0000

What settings should I change in my Fortin Evo all for my LT2 to work accordingly, so far the lock and unlock, GPS location, car interior temperature, battery, locked unlocked and device signal strength statuses work and when I manually start my car with my OEM key fob the runtime even shows up, but the remote start and stop features inside the linkr app report failure, trunk release feature wasn't tested It started getting late here, is there something I'm missing?

001A07233581

Linkr lt2 and rfk411 at same time on evo one

Sun, 30 May 2021 03:47:44 +0000

Hello and greetings,

I have succesfully installed evo one and link lt2 on 2015 nissan sentra standard key. 3x lock works to start and shut down remotely. Linkr lt2 and all the associated functions work as they should. Evo one alarm with siren works fine with shock and glass break working well. I am trying to add rfk411 to the system and am having no luck. I have wired in in a 1 amp diode, band facing remote, on the white wire of the second plug(black) on the linkr harness but cannot program the rfk411 sucessfully, Followed the procedure, all lights etc. working as guide shows they should but no functionality after programming. Also, with rfk411 plugged in, I lose the start, stop, lock, and unlock fubctions of the linkr. I;ve also tried programming the rfk411 to the evo one without linkr in the mix and have nuccess.

Please advise.

Thanks!

2020 Silverado Linkr LT2 door locks not working

Thu, 10 Dec 2020 10:35:46 +0000

I installed the Fortin Evo-all with T-Harness on my 2020 Silverado 2500HD that has no Onstar, then added the Linkr LT2 and everything works except the door locks. I checked continuity of the purple and purple/white wires from the Evo-All plug to the pins on the BCM and the wires are fine. With the Evo-All disconnected I can control the door locks by applying ground to the purple and purple/white wires. I have performed a full reset of the Evo-All multiple times, and tried at least 20 different flash configurations and nothing. It seems as if the Evo-All is not applying ground for lock control, possible firware or module issue because the Evo-All is Flashing the Blue light for lock via the Linkr LT2 and the red and blue for unlock. Any feedback would be greatly appreciated.