Questions & Answers - Questions récentes tagguées mazda-5

EVO ONE programming light blinking and other questions

Wed, 16 Mar 2016 18:41:50 +0000

So I got my EVO-ONE connected to my 2009 Mazda 5 with a FTX 44 2w remote. I was able to remote start it once and that was it. Along with that, I have some other concerns

1. When I try the remote start, the remote flashes green like it is going to go. The EVO-ONE programming light on the back flashes 4 times, which may indicate valet mode according to the guide, but the yellow LED isn't on. EDIT: Just tried turning off valet mode for kicks and now it works. Does the yellow LED not stay on when in valet mode?

2. No blue lights when locking or unlocking. Is that an issue?

3. The doors try to unlock twice when I push the unlock button. There is a pause of about half a second in between

4. I can only unlock the drivers door. A second unlock press does not unlock the rest of the doors

Otherwise I think I got it. Thanks for all of your help with this!

Mazda guides still not correct?

Sat, 12 Mar 2016 09:36:29 +0000

Really appreciate Matvey's info from this thread. Made me double-check a few things. I have a 2009 Mazda 5 and am using an EVO-ONE

https://fortin.ca/en/qa/64323/install-guide-mistakes?show=64323#q64323

1. Guide 24761 also shows the white wire from the main harness as the parking light wire. Wondering if that is incorrect and should be updated to something else?

2. The CAN wires are also labelled incorrectly. They should be the same as 22061. I can send a pic to wirecolor to show this also if you want

Any updates to 2009 Mazda 5 install?

Sun, 14 Feb 2016 13:05:46 +0000

I have a 2009 Mazda 5 Sport. As far as I can tell there is not a 3x Lock option if I want to use my OEM remote. According to this it appears the EVO-ONE has remote start functionality for my car but the EVO-ALL doesn't?

What would I need to start the car with the EVO-ONE?

And the EVO-ALL could only act as a bypass, correct?

Comment reprogrammer démarreur a distance apres batterie a plat

Mon, 05 Oct 2015 14:27:47 +0000

J'ai un Mazda 5 2012 avec un démarreur a distance E400c. J'imagine que le démarreur a été installer avec un EVO-all??

Suite a une batterie a plat le démarreur a distance a arreter de fonctionner. Apres une visite au garage, le mécanicien ma dit qu'il a seulement fallut qu'il le reprogramme. J'ai un problème de drainage de batterie et j'aimerais avoir la procedure pour le reprogrammer pour ne pas avoir a aller au garage a chaque fois. Est-ce que le démarreur perd la mémoire aussitot que la batterie est a plat ou débrancher?

Merci

Mazda 5 GS 2012 with Evo-all

Mon, 01 Dec 2014 13:37:38 +0000

This car has no remote starter nor Alarm system installed.

Is the Evo-all compatible with Mazda 5 2012?

A part of the Evo-all and the flash link updater, do I need anything else to be able to remote start it, will have an alarm too by just programing it?e

Since no T-harness is avail, how many wires are involved?

Thanks in advance!

Reprogram a KEY-OVERRIDE-ALL on a 2007 Mazda 5

Mon, 29 Sep 2014 02:25:22 +0000

Bought a used mazda 5 2007 that came with a KEY-OVERRIDE-ALL and its attached remote starter model OB-3471v (no brand?). The red light was OFF on the Key Override All module and I'm trying to reset it. I guess the car sat for sale for weeks with a dead battery... is it possible to re-program the module?

I tried following the program no 2 for the Mazda 5 (manual transmission) but the LED flashes as soon as I connect the datalink connector. What can I do now?

Thanks

Luc

remote start door lock/unlock wiring 2010 Mazda 5 with Evo-All and crimestopper

Thu, 13 Feb 2014 20:15:04 +0000

What are the prefered door lock/unlock wires to connect a crimestopper RS4-G4 remote starter and Evo-All bypass on a 2010 Mazda5 GT? according to wirecolor.com there is lock (Blue with a resistor) and unlock (blue) or lock & arm (Blue/Orange) and unlock & disarm (Light Green/Red).

Is there a solution for 2013 Mazda 5 push to start

Fri, 20 Dec 2013 19:11:49 +0000

Just checking to see if there is a solution for 2013 mazda 5 push to start