Questions & Answers - Questions récentes tagguées mazda-cx-9

Will Evo One all-in-one remote start work on 2015 Mazda CX-9 with turn knob to start?

Sat, 13 Sep 2025 23:19:22 +0000

Hi, Will Evo One all-in-one remote start work on 2015 Mazda CX-9 with turn knob to start? My 2015 Mazda CX-9 does not need to insert key to start or stop, it has turn knob to start. is this consider stander key? how can i do KEY BYPASS PROGRAMMING PROCEDURE for my 2 key fobs, since it does not need to insert key? Looks like only stander installation is available.

Takeover issue with 2019 Mazda CX-9

Sat, 05 Feb 2022 13:55:28 +0000

I successfully installed and programmed my EVO ONE with THAR-ONE-MAZ3 on my 2019 CX-9

Remote start works fine but takeover doesn't. It was definitely enabled in the programming options and I used the wizard

After unlocking the car, I get in, press the start/stop button and all it does is keep flashing. Even after waiting for 5 minutes, I press the brake pedal and the car turns off. I have tried changing the battery on the fob but did not try the other key yet

What am I missing?

2014 mazda cx-9 inteligent key push start 3xlock guide?

Wed, 23 Jun 2021 20:37:47 +0000

looking for a 3xlock compatible guide for the 2014 mazda cx-9 with the push button start inteligint keys. would it be possible to use the thar-one-maz3 unit like the 2016+ models?

Will The DroneMobile DR5400 interface with the Fortin Evo One and function on a 2019 Mazda CX9

Tue, 26 May 2020 09:45:13 +0000

Will the Drone Mobile dr5400 interface with the Fortin Evo One adn work on a 2019 Mazda CX9? Is there a plug and play harness between the 2 or must it be hardwired?

2018 CX9 Horn Wiring and Liftgate Programming with Evo One

Mon, 30 Mar 2020 17:26:31 +0000

Hi. I have two questions about the horn and liftgate (trunk) of 2018 CX-9.

1) Is there any way to activate horn while CX-9 2018 is parked and off in a parkinglot? or does it require additional wiring? I tried searching high and low at fortin with no luck at all, as they don't have any additional information about horn wiring/activation for this model. Someone did it but they won't share the info. Here's the video: https://www.youtube.com/watch?v=Y7r-sqoNIdM

2) Can I release the Liftgate Using Evo-One while CX-9 2018 is on in either P/N modes with OEM Remote?

I tried to look for options for that but all I found was trunk output pulse or something similar.

Any help is much appreciated. The question has been here unansewered for over a year and still counting.

2019 Mazda CX-9, Evo-one, thar-maz3 T-harness

Wed, 01 Jan 2020 00:57:19 +0000

Couple questions.

For the vehicle and hardware above should I be using Guide 68271? When I search for a guide it comes up with a few different ones that don't quite match but If I search under the Thar- maz3 it brings up this one which looks right.

If this is the right one, it says I need the Evo-one to be hardware 7 minimum. When I connect to the flash link it says I have a hardware version 4. Which seems odd as the sticker on the back has a date of 11/2019 (SN 002B04-060015) which I would think would be the latest hardware version .

In the guide it says I need 2 diodes. It does not say where to hook them up or of what value they should be.

Dcryptor taking a really long time... is it down?

Fri, 27 Dec 2019 14:46:38 +0000

I'm trying to install the EVO-One on a 2019 Mazda cx-9 using the THAR-ONE-MAZ3 harness. I'm at the stage where I'm letting the Dcryptor do its thing, however it's been "processing update" for almost an hour now... is the DCryptor server down, or is this a normal amount of time for it to process things? Thanks for any help!

MAZDA CX-9 2012 INTELIGENT KEY EVO ALL+TARANTULA RS3 PROBLEM

Mon, 04 Nov 2019 14:27:58 +0000

I installing evo all+tarantula rs3 to mazda cx9 2012 with ineligent key .

all prog and connection is correst but if option on on evo all unlock door ,start engine and lock car ( disarm car alaram) windows and sunroof is opened if this function is off the car alarm turns on .

what can i do to privent the windows and sunroof from openning

2016 Mazda CX-9

Sat, 14 Sep 2019 11:29:44 +0000

Installing an Evo One with a THAR-ONE-MAX3. Programming goes through smoothly, decrpyts on the Flashlink fine, re-install, and remote start will not function. I have tried resetting the bypass and decrypting multiple times, checked to insure it is not in valet mode, and re-updated the firmware for both bypass and remote start twice before reinstalling to only get the same result. I have also tried lock, lock, lock and lock, unlock, lock, all times and neither works.

I have not hooked up tail lights or pin switch as they are supposed to be controlled by data bus. If this is wrong please let me know.

Disable CX-9 Horn for 3x Lock

Thu, 08 Aug 2019 10:34:27 +0000

I recently completed the install of the EVO-ONE on 2019 CX-9. However, with the 3x lock the horn beeps and will drive my neighbors crazy. Can the horn be disabled? I tried the lock/unlock/lock procedure but the mirrors will unfold and refold each time. thanks.

About Mazda CX-9 GT 2018 Horn Activation and Liftgate releasing?

Fri, 08 Feb 2019 17:42:45 +0000

Remote Start Not Working: EVO-ONE & THAR-ONE-MAZ3 on Mazda CX-9 2016

Mon, 13 Aug 2018 12:27:01 +0000

I cannot get the remote start to work using an EVO-ONE with THAR-ONE-MAZ3 harness on a Mazda CX-9 2016. The EVO-ONE has been configured in Remote Starter to enable option 38.5 Lock-Unlock-Lock to remote start and the module flashes blue, 2x blue, then blue and nothing happens afterwards.

I do have the module firmware upgraded to 71.46 with options C1 and D2 enabled per the installation guide. Is it possible some of my other settings are not configured correctly?

Does remote start for 2016 Mazda CX-9 turn on the climate control or heated seats?

Wed, 01 Nov 2017 09:39:38 +0000

I am considering buying a remote starter solution but I want to make sure that the product will heat the cabin of the car in winter.

2016 CX-9 security light doesn't stop blinking

Sat, 14 Oct 2017 23:17:26 +0000

I have a 2016 CX-9 and choose the EVO-ALL along with a 1-way RF kit from cimestopper. I worked through step 7 with the first OEM key and the security indicator did not stop blinking for more than 5-6 seconds. In a bit of a panic, I turned the ignition off and tried again with a second OEM key. The security inidicator took a long time before turning off, but the EVO-ALL only shows the yellow light.

When I restart the programming from step 1, I can no longer get the unit to turn yellow in step 6 where I press the PTS twice.

Is it safe to master reset the unit and try again? Following the reset instructions here: https://fortin.ca/en/qa/403/programming-evo-all

Also, any known issues when the security indicator takes too long to turn off?

Takeover with THAR-MAZ1 (EVO ONE or EVO ALL)

Mon, 11 Sep 2017 03:43:21 +0000

When comparing EVO MAZT1 with EVO ALL it shows that Takeover is not available with MAZT1.

Is it the T-harness that conflects with the feature? and will that apply when using EVO ONE with THAR-MAZ1 in 2017 Mazda CX9 Push to start with 3x OEM remote start?

If it does, is there any solution for the mentioned vehicle where OEM remote start, takeover and plug & play is a must for me.

2017 CX9 Push To Start - Cant unlock car after remote start - Evo One

Sat, 20 May 2017 22:57:29 +0000

Hi

Car - 2017 Mazda CX9 Push To STart

Fortin - Evo One, Maz THAR-MAZ2, Fortin Flashlink 4

Evo Number - 002B02164087

Guide Used - 65561

Vehicle has been succesfully wired in and Dcrypted. Once i remote start however i am unable to get access to the car till the remote starter time runs out and turns off. Remote fob unlock doesnt work, Passive door unlock request button does not work on teh vehicle either

Please advise how i can enable remote Fob control whilst remote starter is running?

Also can i turn remote start off via the remote after i have remote started?

Cant upload data to Dcrytor or Flash Unit

Mon, 15 May 2017 21:49:27 +0000

2017 Mazda CX9 Push To Start

Unit Wired up as per guide 65561

Using Evo-ALL & THAR-MAZ2

Unit responds via LED's all as per instructions
When sending Data to Dcryptor it appears to show no progress even after 1 hour

Have updated Remote Start to V1.21 however after update flashlin kmanager freezes at EVO UPDATE SUCCESSFULL. Flashlink Manager red and & green are solid. Blue is blinking. No lights on EVO-ONE.

If i disconnect and reconnect it goes to Bypass mode. Running V71.43, if i click Flash it tries to flash unit and then says unit discconnected - EVO RED led is flashing, Flashlink Red LED is Solid. I have to discconect and reconnect to get it to appear in flashlink manager again

2015 cx-9 vitre descende lors du demarrage

Thu, 05 Jan 2017 10:52:47 +0000

lors du demarrage a distance lorsqu ils fait la sequence debarre -barre les vitre ouvre.le cx-9 a une fonction si tu appuie 2 fois sur debarrer et tu tien les vitre et le sunroof ouvre(ne se desactive pas).j ai reeussi a limiter la descente a apeu pret 2 pouce en reduisant le pulse a .25 seconde mais ils ouvrent toujours pareil

2015 mazda cx-9 alarme

Tue, 13 Dec 2016 09:53:22 +0000

bonjour j ai un client qui ma telephoner pour un probleme suite a notre installation d un evo-onesur un cx-9 gt avec le tech package.lorsque les porte sont barrer avec le remote oem ou le bouton dans sur les pognees l alarme s active lorsque la voiture est demarer avec le demareur a distance.l option d2 est activer mais fonctionne seulement lorsque la voiture est barrer avec le remote du systeme de fortin, la l alarme ne s active pas.il a aussi dit que si les porte sont barrer avec le remote oem et ensuite demarrer a distance l alarme s active et les porte ne se debarre avec aucun remote doit debarrer avec la cle une fois debarrer il peu arreter l alarme.

je n ai malheureusement pas le numero de service presentement mais le firmware ne doit pas etre en au de 71.36

installation guide for 2016 cx-9 is the same that cx-5

Mon, 12 Sep 2016 08:15:09 +0000

i was looking for the quide for the cx-9 2016 and it gives me the ones for the cx-5 are the wire the same color and locations are at the same place?

Where can I get the guide for Evo-All for Mazda CX-9 2014?

Tue, 24 May 2016 09:45:23 +0000

My mazda is not the keyless model, I'm installing it with a Python 5706P.