Questions & Answers - Questions récentes tagguées mdx

2011 Acura MDX Help....

Sat, 15 Jan 2022 12:21:45 +0000

I installed two of these on my vehicles in the past and everything worked flawlessly. I love this product.

However, today I installed this on my coworkers 2011 MDX (Acura) regular key, evo all, with T-Harness. I made all the connections as per the instructions. The hardest part was getting steering wheel column plastic off. HAHA

I pressed the button and plugged in the 6 pin connector and it just continues to flash thru the colors. It never turns red like the instructions say. I did a trouble shooting form on the website and it says the firmware is out of date. So I just bought a flash link updater.

Is there anything I missed??

Are there any hints to let me know about for the updater when I get it?

THANKS

evo one compatible with 2001 mdx ?

Sun, 19 Dec 2021 18:26:24 +0000

Fortin EVO-ONE EVO-ONE All-in-One Remote Start, Security & Data Interface compatiblity with acura mdx 2001

Aux options

Sun, 01 Nov 2020 16:44:09 +0000

Have installed evo all on 2014 Acura mdx by professional installer.

The App evo start 2 have big delay and sometimes not responds at all.

Options like trunk/ windows/ heated seats not working at all. And installer said that this options are not supposed.
What should I do? How to connect aux options to control heated seats and HVAC system?

Which wire on the THAR-HON-A2 connector needs to be cut for a 2010 Acura MDX EVO-ONE Installation?

Mon, 13 Jan 2020 01:05:40 +0000

The installation guide for the EVO-ONE on a 2010 Acura MDX states that a wire has to be cut on the green male side of the THAR-HON-A2 connector, and that wires D1 and D3 are connected to the two newly created ends of the cut wire. Which wire am I to cut? Any and all help is greatly appreciated. Thank you!

Alarm trigger by using the key to open door manually

Tue, 15 Oct 2019 14:46:22 +0000

After EVO ONE installed, When i open the door with key manually on 2009 acura mdx, it triggers the alam and I have to press the unlock button on door to stop alarm. Is this normal as it wasn't before installing the evo one. I did installation without T-harness and didn't connect the door lock and unlock negetive wires as I could not find these two wires.

Can't locate Parking light (-) wire on 2008 Acura MDX. Can I use (+) wire instead ?

Fri, 03 Feb 2017 03:50:20 +0000

Hi. I installed EVO-ONE with T-Harness on 2008 Acura MDX. Follwed your instruction and everything works so far. However, I can't find "Parking light (-) wire" on the light switch. I probably have to remove the steering wheel to remove combination switch assembly to find that wire.

Is there any other way to get this to work ? Is there any option on EVO-ONE to switch the polarity of Pink wire on A12 so that I can use "Parking light (+) wire" instead ? ( (+) is near fuse box, much easier to access than removing the steering wheel.)

If not, is it possible to wire an LED and hook up its lead to somewhere in EVO-ONE ? ( I can install one LED on dashboard as an indicator light)

Your help is greatly appreciated.

Thank you.

- James

Evo-One E1 siren install

Sat, 23 Jul 2016 18:35:18 +0000

How would I hook up my siren? It states pin E1 can be used as a + output option 1, or should I use the - horn output and choose option 4. Also, if using E1 does it reqiure a relay between it and the siren?