Questions & Answers - Questions récentes tagguées murano

Too many keys issued while programming evo-all 2017 Nissan Murano

Wed, 20 Feb 2019 09:45:16 +0000

So while attempting to do the Dcryptor process for my 2017 Nissan Murano using the EVO-All and T-Harness kit, the process wouldn't complete, instead if would say there was a problem with the USB connection. So I attempted to do the Step 1 of programming again but now the Dcryptor process is saying that too many keys have been issued for my vehicle now. So, how do I go about resetting this error so I can start over again. Can I reset it by myself using the flashlink? Any help is greatly appreciated!

NISSAN MURANO 2016 EVO ALL STAND ALONE NOT WORK

Sat, 03 Nov 2018 17:43:16 +0000

Evo ALL stand alone not work to Murano 2017.

Connection all is correct ( diagram 66611) 3xlock works ( blue led flashing),enigine not crank ,dash on and message AWD error,check engie light on.

Decryptor is fine.

If engine start Push to start work fine ,but engine off dashboard still on and need disconet evo all to dashobard off.

I try three difrent modules evo all and problem is still

whats wrong ??

2014 Murano - What is the Door Pin connection for?

Sun, 14 Oct 2018 15:31:05 +0000

I have installed the FORTIN EVO-ALL with THAR-NIS1 in my 2014 Murano. The only connection I was not able to make was the Door Pin connection to the Pin on the BCM connector. I found the BCM, but it's on a board that is too tight to access even after removing the instrucment cluster, etc. Can I leave it disconnected and what will happen as a result?

Murano 2011 Brake Lights Flash but doesn't start

Sat, 21 Oct 2017 13:05:22 +0000

Hello, I just finished installing the Evo NIST1 and whenever I press the key thrice, it receives the signal, both the parking lights and the brake lights turn on, and after 5-10 seconds, it fails to start, and the brake lights (and parking lights) flash three times and turn off completely. I did all the wiring correctly (I'm pretty sure) anyone have any ideas?

relais pour pathfinder, altima et murano

Wed, 02 Aug 2017 12:25:53 +0000

je voulais savoir si éventuellement, il va y avoir une solution pour ne plus installer les relais sous le capot. Idatalink on la solution. Je préférerais continuer avec vous. Merci

2012 Nissan Murano. Key light on dash. Doesn't go out.

Mon, 27 Mar 2017 17:46:44 +0000

2012 Murano PTS. EVO-ALL stand alone with Crimestopper Revo RF kit. Programmed fine. Works as it should. Is it normal for light to be illuminated in this particular application, or should the light go out?

2012 murano shuts off when i put in drive

Sun, 15 Jan 2017 12:40:19 +0000

hello i have a fortin evo all with the T-harness installed on a 2012 nissan murano. the remote start works great with oem fob 3x lock feature. the only thing i noticed is when i remote start it and unlock the car, close the door then put it in drive, the car shuts off and my dash says to put it in park. when i remote start it and let it run for a longer period of time i have no issues hoping in it and driving.i have the evo all nist 1 service#001A06591386, i also updated firmware to 72.24.

nissan murano autolocking

Sat, 12 Nov 2016 10:32:42 +0000

recently did a 2006 murano regular key with a compustar remote starter. locks/arm/disarm works fine until i get in the car for takeover and its locks the vehicle but doesnt unlock unless you do it manually. i tried changing ignition locks on/off etc but nothing seemed to work.

Murano 2015-2016

Tue, 05 Apr 2016 18:18:56 +0000

Est-ce qu'une version pour Murano s'en vient. J'en ai installé 2 à date comme un Pathfinder. Tout fonctionne bien sauf pas de takeover. Je voulais vous en informer. Reste à avoir la programmation pour se modèle. Le tout avec un EVO-ONE Merci

how do I get evo all past step 3 yellow light solid

Sun, 06 Mar 2016 13:19:35 +0000

2011 Nissan Murano. During programming, the evo all stops after the yellow light turns solid. When I press the pts button as instructed, red light or blue light never turns on.