Questions & Answers - Questions récentes tagguées nissan

Starter issues

Sun, 19 Jul 2026 14:35:20 +0000

My vehicle

Nissan Rogue Sport 2017

Oem remote start with key I added this to extend the range of remote start

My setup issues I have an evo all unit installed and working following the steps and guide I firstly had this unit installed around a 6 months the OEM starter went bad it was changed out and I reinstalled the unit with new updates the first time used I did not get any ideas of an issues but the following day after remote start the vehicle was making loud noises brush noise screeching and I cant describe it but it was very loud I open the hood and it seems like it was near the new starter and ideals if the remote start is messing up the vehicle. The current vehicle came with keys for remote start lock3× and a button for remote start.

Evo-Nist1 in nissan 370z

Wed, 06 Aug 2025 08:40:10 +0000

I insalled Evo-Nist1 in my nissan 370z 2013. i connect the brown wire to red brake light wire, the Door pin wire was already in the BCM so i join it with the orginal wire.i added the lock and unlock to the BCM also. when i connect the date wire the evo-all it flash all the three lights but nothing change. the car start normally and lock and unlcok. when i remove the data wire the car keep unlcok unlocking multple times.

i didnt install the bonnet switch.

please i need a soluation.

Remote Start on Nissan Micra 2024 Standard-Key

Sun, 08 Jun 2025 21:36:47 +0000

I currently acquired what this page is known as Nissan Micra, currently I see that only the 2015-2019 models are handled, but the model I buy is 2024 as here in mexico is still marketed, but I would like to acquire a remote start for my car, I currently already have one installed in a Nissan Versa 2022 and works great, but I would like to know if despite not having one directly for this model on the page, there is one that could be compatible with my Nissan Micra 2024, is automatic transmission with a standard key ignition. Maybe it is compatible with the same models that are used in the micra 2019, but I would like to know if someone already made the attempt.

Greetings, thanks.

Alarm goes off when using app for EVO One with LTE module on 2020 Nissan Armada.

Mon, 17 Mar 2025 21:15:28 +0000

I've mostly successfully installed my EVO One with LTE module on my 2020 Nissan Armada. App works great for locking, unlocking, and remote starting. Factory key fob works as expected. However, if I unlock with the app and open the door without having a key fob with me, the car honks like the factory alarm is going off. Given that the unlock and lock functions are working, I believe the pins added as the guide shows are functioning properly, but for some reason, the alarm is not being disabled when coming from the EVO One. I've tried adjusting option 14.2 to 14.1 per another similar post, but that didn't do anything. We've mostly been living with it as the described trigger doesn't happen often, but any help would be appreciated to get it sorted out.

Nissan Cube 2013

Thu, 16 Jan 2025 14:10:40 +0000

Hi could you please reset my evo-one serial number 002B04 700870

I have a yellow and red lights flashing when I connect the heavy wages connector.

I have tried to resetting with the valet switch but still flashing.

Any help will be appreciated.

This module is brand new.

Nissan Frontier factory fob 3x lock to start?

Wed, 20 Nov 2024 12:58:22 +0000

Is there a special process for enabling lock x3 to start for a Nissan frontier? It's offered by competing remote start vendors (probably using Fortin system). I found a guide for enabling via Link software 3x lock to start but the NIS5 guide does not mention it. If enabled via link app in the module, is that all that needs to be done alongside the wiring instructions? The module should have the inputs internally to work it out from what I can see in the diagram. It would be down to the module logic which I don't know the details of.

Need help selecting an alarm for 2019 Nissan NV 200 Cargo Van

Fri, 08 Dec 2023 21:33:36 +0000

Hello Tech Support,

I am in need of your help, kindly assist me with select an alarm that will be Plug and Play for my 2019 Nissan NV200 Cargo Van. I would like to have 4 buttons on the remote ( Cargo door, unlock , lock and remote Start/panic), remote start can also be accepted.

Thank you in advance.

My email is markwilkinson805@hotmail.com

2021 Nissan Rogue power rear hatch

Sat, 11 Nov 2023 12:47:51 +0000

2021 Nissan Rogue with the power rear opening hatch , when installing the evo all and RFK942 remote the power hatch requires a 3 second hold on the switch in the car compared to the monetary push with the base model , is there a way to program the evo all to to instead of a momentary ground on the hatch realease to hold the ground for 3 seconds

2010 nissan patrol

Sat, 14 Oct 2023 05:34:12 +0000

Hello. For a 2010 Nissan Patrol (Euro), which instructions will work? And the firmware? StandAlone.

FORTIN RFK411

Wed, 17 May 2023 03:29:30 +0000

Hi, again before 5 months i have installed EVO-ALL with NIST1 on Murano 2009. I can start the car wirh OEM FOB (3xLOCK) but can not stopped it or unlock it with the FOB. It can unlock it with the phisical key and when oped the the door the engine stopped. I had done connections to the BCM module(LOCK/UNLOCK pins).

Now i have installed Fortin RFK411. I can start and stop the engine but still can not unlock the car when engine is remotely started. I can not lock or unlock the cars when car is NOT started with Fortin remotes.

I have one question- if i make connections for LOCK/UNLOCK not to BCM, but directly to the drivers door button for LOCK/UNLOCK.

Please make advise!

What's all the accessories I need to connect a Fortin EVO-ALL to 2012 Nissan Pathfinder Standard Key

Sun, 14 May 2023 18:50:43 +0000

Connections

2022 Nissan kick check engine light

Sat, 19 Nov 2022 21:13:06 +0000

I installed a evo all stand alone with a rf kit on a 2022 Nissan kick everything works but the check engine light came on some communication codes faulty gas gauge and other things, I got it erased but every time I remote start the car it comes back on if anyone knows how to fix please let me know

thanks

2012 nissan versa fortin one t harness can it use the 3x lock feature.

Sun, 06 Nov 2022 20:10:47 +0000

2012 nissan versa sedan,using evo one and t harness how do i know if the 3x lock feature will work on this or can only use the long range remotes.Is there something that tells you which cars can take the 3x lock feture?

Nissan Versa 2019 Standard Key Installation Help

Thu, 13 Oct 2022 01:35:39 +0000

Hi there,

I am wanting to install a remote starter into my vehicle and want to confirm that it would be possible for me to do so. I looked at the vehicle finder and saw that the Versa wasn't avaible in the year 2019 so i was just going to flash the modular for a 2018 instead. Since there is no connection diagram for the 2020 standard key to reference to from the 2018. I looked at the diagram for a 2019 nissan versa note and 2018 Nissan Versa both standard key. My car doesn't have a transponder and i would assume that during the programming i would insert the white big 8 pin connector while pressing the program button, letting go on blue. Insert all remaining connectors, put the key to the run postion let the blue leds flash and once it stops flashing remove they key.

2018 Nissan Versa Install Diagram https://fortin.ca/download/79341/evo-one_ig_thr_bi_nis5-versa-sedan_2012_key_a_79341.pdf

2019 Nissan Versa Note Install Diagram https://fortin.ca/download/79331/evo-one_ig_thr_bi_nis5-versa-note_2014_key_a_79331.pdf

EVO All, THAR-NIS3, X-Trail(Rogue) Push to Start 2016

Tue, 06 Sep 2022 14:55:05 +0000

Hi,

I have installed EVO All with THAR-NIS3 (had to extend the OBD wiring as my car is RHD and the BCM is on the left passenger side.)

Everything worked during install per the instructions including the decrypter (used the Rogue 2016 Push to start as the ref.)

Selected Diesel.

OEM Alarm

First time the car just cranks and doesn't start(3xlock press) - the (factory) alarm goes off (have to press unlock on remote to stop the alarm)

Second time the car starts (3xlock press) but thats it if i try again it doesn't work(cranks but doesn't start)

Model - EVO-ALL

DATE 07/2021

SN 001A07273507

I know it is a bit of stretch but keen to get it working before winter sets in. Appreciate any support on this

2013 sentra push to start fix is to connect white/black wire from where to which wire exactly?

Tue, 14 Jun 2022 14:19:36 +0000

I read a previous post about a nissan being wired with pre-assembled harness and EVO-ALL on 2013 push to start sentra ... and brake lights and start button light up but nothing starts...The red light on controller flashes 3 times after it tries to start.The fix was connecting the white/black wire from 19 pin connector to push to start button..I just need some guidance as to where exaclty does the white/black wire come from and where exactly am I supposed to connect it? I`m not a tech,just a guy who bought a plug and play remote start on ebay.Any help is appreciated..

How to connect D4 D6 , 2006 Nissan Altima

Sun, 23 Jan 2022 14:24:37 +0000

I'm using evo-one with niss2 harness for my 2006 Nissan Altima I am confused about the connection D4 and D6 showing guide #78211. I also don't know where to connect the pin 30 from the relay for parking lights . A picture would be great, or can I leave the parking light unconnected? The last question, do I have to have a RF module to remote start? Because when I put my key at on position, the blue lights went off.

2016 nissan versa, can't find a guide for a non transponder key.

Fri, 21 Jan 2022 14:14:16 +0000

Evo one, thar-nis5 kit.

EVO ONE 2011 NISSAN XTERRA W/GUIDE 79461, WRONG CONNECTOR

Thu, 20 Jan 2022 21:04:31 +0000

PAGE 3 OF GUIDE,

BALLOON 5- BMC IS NOT BEHIND GLOVE BOX.

BALLOON 2- CONNECTOR ON T HARNESS IS NOT CORRECT FOR TRANSPONDER

BALLOON 3- CAN'T FIND CONNECTOR

IF I GET THE ABOVE ISSUE ANSWERED, WILL MANUFACTURES REMOTE 3X LOCK WORK?

have to push the pts button several times for 2015 nissan altima to turn off

Fri, 14 Jan 2022 20:59:16 +0000

im installing a evo-all nisa4 t harness in my 2015 nissan altima. it will start with the remote start oem fob but after getting in the car to shut the engine off/on you have to press the pts button several times for it to do anything. what am i missing?

2007 Nissan Altima red light flashing 3 times when trying to start

Wed, 05 Jan 2022 16:56:57 +0000

I have completed the install and programming everything seems to be done correctly. I did not connect the 3 wires to the bcm foot lock unlock and door pin because I don't want to. When I hit the lock button 3 times the unit clicks and attempts to start but then red light flashes 3 times and doesn't start.

{2015 Nissan Altima} Only way to stop engine is to press start/stop button on dash 3 times.

Sat, 01 Jan 2022 13:42:01 +0000

After installation of Evo, the only way the car turns off is by pushing the start/stop button on the dash 3 times. It no longer shuts off by just pressing it once. This occurs when the car is started with the fob (lock lock lock) and it also happens when the car is started traditionally with the start/stop button on the dash. Why???

Programming issue

Sun, 05 Dec 2021 23:43:59 +0000

I have 2009 Nissan Versa So after connecting all the wires I reached the programming part when I hold the programming bottom to connect the main harness it start changing the led color rapidly and even if I release the bottom it keep changing the led color and never stop until I disconnect the main harness is it something has to do with flushing the module or the wiring

Will this work with a 2013 Nissa Versa with Manual Transmission?

Fri, 03 Dec 2021 10:16:42 +0000

Will this work with a 2013 Nissan Versa with a standard transmission? I noticed that most of your instruction sheets have a section for compatible vehicles that have a manual/standard transmission but I do not see that with this vehicle. Regular Key start.

EVO-ALL THAR-NIS1 Nissan Sentra 2015 Push-To-Start doesn't start

Sun, 28 Nov 2021 18:34:20 +0000

The steps I followed:

- Plugged the 4 pin back of push to start button

- Plugged the 4 pin break pedal

- Plugged the 16 pin OBDII

After plugging those connectors I went with the key bypass programming procedure.

Pushing the lock key 3 times makes the module send commands to the car, but no success turning it on. And then the red light flashes a few times (if I'm not mistaking it's 3 times).

I did not connect those 5 other wires into the BCM, Driver kick panel or Push-To-Start Button because I thought that only connecting the plugs would be enough to get the vehicle started. Is this assumption right or I should connect all those other 5 wires to get the car started?

The following file is the installation guide so you guys can take a look and help me on it:

https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf

everything was working now its not starting

Fri, 22 Oct 2021 23:46:42 +0000

i just installed an evo one on 2012 nissan versa standard key.im using nis5 t harness with rf442. i installed all the wire except the door lock/unlock vehcile was remote starting with delay the ignition instrument panel lights turn on and click turn off start second time it would start .i removed the evo ground and now when i try to start i see red light flash and hear clicking from evo one with no sucessfull start please help.lock un lock wires are still not connected. im not using door pin and hood pin wire which are grounded to chasis.

rf kit program setting, door unlocking

Wed, 20 Oct 2021 21:38:49 +0000

what setting do i need to enable to install RF442 on 2014 nissan versa with standard key.im using t harness thar one nis5. how do i program the rf kit and do i need to connect pin a1 to pin a8 if i dont want to use rf kit to unlock or lock just need remote start.

bypass key programing

Tue, 19 Oct 2021 22:06:10 +0000

i have a 2012 nissan versa without intelegent key im using t harness. i plugged in all plugs and connected flash link updated module. now i was KEY BYPASS PROGRAMMING PROCEDURE . i did firs 2 steps now when i go to turn on key the yellow led is solid and red does not turn on. please help also i have not connected any lock unlock wires and driver door pin or the hood pin aswell as the parking light wire.

2006 nissan x trail evo one install starts but shuts down after a few seconds

Sun, 26 Sep 2021 18:12:28 +0000

i installed evo one with rf642 succesfully. car starts for a few seconds then shuts down then starts it for the second time for another few seconds then again it shuts down.

it starts it twice and shuts down. then the remote responds the red LED blink which means its terminated the remore start.

can someone help me? thanks a lot

Evo-all and compustar rf remotes

Sun, 19 Sep 2021 14:08:25 +0000

Hi i bought a evo-all and a compustar 4900s and after trying to install the compustar system to the evo-all and had no luck, I decided to to see if I could just use the remote and antenna with the evo-all rather then the compustar remote start. And if its possible to just add the antenna and remotes to the evo. How would one go about doing that?

VALET mode from crimestopper REVO4.1 remote :: Turbo mode activation

Wed, 08 Sep 2021 04:38:28 +0000

I have an EVO-ONE for remote start and built in Alarm ( using the horn )

EVO-ONE S/N : 002B04198955

The setup is configured for a Nissan Qashqai ( rogue sport ) 2019 with a PTS ( using T harness )

I have installed the crimestopper REVO4.1 rf kit succesfully and i have two questions :

1- How to enter the Valet mode from the REVO remote ( their guide is very basic and did not mention how to do so , Though i discovered by luck that holding the trunk button would disarm the EVO only for temp time till i lock again but do not know how to trigger the Valet to stop the starter and alarm completely )

2- I cannot find a way to activate turbo mode ( it is already enabled in option 19 with 2 minutes runtime ),

while the engine is running and i am inside the vehicle, i press the remote start on Revo remote ,The Car acknowledge by 3 parking light flashes then if i press the ignition push button the car shutsdown ( while it should keep running and then i should leave the car and lock it to activate turbo for the 2 minutes )

I am stuck on the part that it shouldnot shutdown when i press the push button

I tested also with the same procedure but without pressing the push button , the car keeps running for more than 5 minutes ( i believe it should be in idle mode and will shutdown after the full 15 minutes but i didnot test to wait for 15 minutes )

Sorry for the long description and thanks for your support

2012 titan conncections

Mon, 30 Aug 2021 14:12:28 +0000

intall question for 2012 nissan titan SV (standard key)with factory alarm.

evo-all SN#001A07 215887 with crimestopper Sp402 remote starter.

1)will i need to connect wire for the Auto Lights shut down?which wires i need from Evo-All

2)do i need to connect Security Led wire?which wire i need from Evo-All?

3)also how do i connect all 4 doors for the door trigger?

Also if i were to use Evo-All for stand alone can i use crimstopper rf remote and antenna?thanks

Is it necessary to install an additional remote control?

Sun, 28 Feb 2021 07:13:52 +0000

I contacted the local dealer to order any type of Fortin products that could fits my nissan xterra 2014 with standard key, so, the dealr told me that its will not work with my OEM key fob unless if buying an additional remote control from Fortin. Is it true that I will not benft from my original remote ??

I THOUGHT THIS WAS PLUG AND PLAY, WHAT ARE ALL THE WIRES WITH NO PLUGS ON THE HARNESS?

Fri, 05 Feb 2021 19:49:14 +0000

WHAT ARE ALL THE WIRES WITHOUT PLUGS? WHAT AM I SUPPOSED TO DO WITH THEM? I HAVE NOT SEEN ANYTHING OTHER THEN PLUGS ININSTRUCTONAL VIDEOS. ARE THEY FOR UNNECESSARY OPTIONS? DO I NEED TO CUT THEM OR INSULATE THEM?

the box it came in says EVO RS. it is the NIST3 with the harness, hood pin and vallet safty switch all included. my vehicle is a 2014 rogue with push to start.

Altima will not start

Mon, 25 Jan 2021 22:47:04 +0000

I installed this on my 2011 Altima. Flashed and programmed fine, when I hit lock 3x the parking lights will flash and brake lights turn on but doesn't start. If I have another person sit in the car and push the start button while remote starting, vehicle will start. Not sure what to do please help.

2014 Nissan Altima, factory remote start

Mon, 30 Nov 2020 14:25:27 +0000

Hello. Do you sell a product that will allow me to enhance my existing factory remote start? Bluetooth, long range kit, etc?

will not start but brake light go on

Thu, 26 Nov 2020 12:14:10 +0000

2019 no remote start brake light come on, try to start but wount, were to test for 12 v

What is required to install an EVO ALL on a 2020 Sentra with push to start?

Wed, 18 Nov 2020 12:18:39 +0000

I know I need a ring antenna for the OEM remote. Do I need an RF kit to use the remote start function, or will the OEM remote work? I notice there is a remote start module in the wiring diagram in the install guide. Is this a separate module I need to purchase?

HELP Nissan Altima 2013 Push Start

Tue, 03 Nov 2020 20:26:46 +0000

I ordered Nist4 with Evo all for a Nissan Altima 2013 Push Start. Its a plug and play on the BCM behind the cluster. Everything went fine with programming, but when I try to start the car while I am inside with press brake and push button to start gives me error i-key start error, the engine ticks no turn over.

When I am outside to remote strt 3xLock, it starts!! but inside using the normal car starting keyfob it doesn’t? I decrypted the module twice and also and sometimes it ticks no start. I programed it to car twice everything went well, all the flashing when I was programming went exactly per book, help please??

- Option D6 is on

- ignition turns on but error message i-key error refer to user manual

- car ticks when I press brake and push start, but no start and error message i-key error refer to user manual

- sometimes with remote start 3xlock the car starts sometimes it just ticks like I am inside the car

- SN: 001A07 119247 EVO-ALL

2011 Nissan Rogue with intelligent key no takeover

Tue, 03 Nov 2020 09:54:27 +0000

i have a 2011 nissan rogue with i- key remote start will work with the drivers door open when closed the evo all will not turn on. also when started i cannont do takeover

Why I can start on the remote but unable to start on the push button niss as n rogue 2014

Mon, 26 Oct 2020 05:38:01 +0000

I use crimestopper and Evo-all has been well programmed

Evo all with t harness will remotely start 2016 rogue but climate control does not come on until I push start button

Tue, 15 Sep 2020 21:27:29 +0000

Remote start works with factory remote but ac/heat does not come on

2014 MAXIMA PTS WIRE

Sat, 16 May 2020 13:12:57 +0000

Using evo-nist1. on the PTS wire on pin 4 of the start button i am getting 12v when pressed and .59 when released which is the oposite of what it says on the diagram. any ideas?

2011 Nissan Titan SV parking lights and horn?

Tue, 14 Apr 2020 19:59:36 +0000

I have installed the Evo One with a RF641W on a 2011 Nissan Titan SV standard key only thing I cannot figure out is the parking lights i purchased the relay needed just do not know where to get my 12 volts from on the two terminals and would like for horn confirmation when truck is locked otherwise everything else works beautifully. Please help me with the parking lights and horn confirmation for locking the truck thank you for your time.

Damian.

Need help with the install on a 2016 Nissan Altima (push to start)

Mon, 06 Jan 2020 20:28:13 +0000

Hello. I've messaged before. I'm using diagram 75881. The person I talked to already said it's the right diagram. He told me to cut all the wires on the 15pin connector. So I did just that cut them all, wired the black and red into pin 1 and 5. Tryed to program it. Did not work. Also had no power in the car. So I wired the factory wires 1 and 5 back into the 15 pin connector and spliced the fortin wire into that. I can put the 4 pin (black) connector in and the 3 led lights light up. Now if I tryed to hold the button and connect the 4 pin it should program. But it doesnt. What is the problem. Before the guy told me to cut all the wires and just the 2 from the fortin harness in pin 1 and 5. But that gave the car no power.

2014 Nissan Rogue EVO-ALL Parasitic Drain

Mon, 30 Dec 2019 20:59:09 +0000

I installed and programmed an EVO-NIST3 on a 2014 Nissan Rogue SL.

The remote start functionality works on the car, and it doesn't bring up any errors, but after installing the system, the car battery keeps going dead within hours.

A parasitic draw test reveled the EVO to be the culprit, adding 600-750mA of load on the battery even after the car has been sitting for 15-20 minutes, locked with all doors closed.

The problem seemed to be fixed after unplugging each harness connector from the BCM and replugging them, as the current was reduced to under 50mA total, and the battery survived nearly 8 hours without losing charge, but the next morning the battery was dead, and after charging, the battery had a parasitic load of nearly 800mA (again confirmed to be mostly from the EVO)

Nissan Dualis 2013 intelligent key (Qashqai) j10 harness for EVO-ALL / EVO-RS

Mon, 30 Dec 2019 20:24:19 +0000

Hi Team,

I am looking into EVO-ALL / EVO-RS to have remote ignition on my Nissan Dualis 2013 (Australian name of Qashqai).

Couple of things I was unable to find answers for -could you please advise ?

1. Which harness I would need - I was looking into EVO-RS sets, and Nissan Qashqai 2013 is not listed in any of the supported model listst for NIST1, NIST3, NIST4 harnesses.

I would really prefer to buy a set loaded with proper firmware and proper harness rather than experimenting with wiring /firmware and purchasing firmware flasher.

2. Would be remote ignition supported with OEM remote/intelligent key (lock, lock, lock to ignite) or I will need to purchase Fortin RF remotes for that ?(I see that some Nissan models are not supported and you can only use RF kit remotes to ignite)

Kind regards,

Vad

2016 nissan altima push to start. Ordered the fortin rs. Right coner says Nisa4

Mon, 30 Dec 2019 10:11:35 +0000

I'm using diamgra 75881. Not understanding the wire hook ups. I see the black and red get sliced into the pcm on the white connector. The diamgra I'm looking at says stuff about unlock,lock. And start,stop external. Am I using the right guide?

2013 Nissan Versa Standard Key No Transponder Evo-One

Tue, 24 Dec 2019 21:28:43 +0000

I believe my issue might be similar to this question: https://fortin.ca/en/qa/93425/2016-versa-note-std-key-no-transponder-unable-to-program-evo-one?show=93425#q93425

This Versa does not have a transponder so I am getting stuck on the same step. The other question mentions a method of programming using the blue led. I am unable to find these steps. Are there steps listed somewhere to progam a nissan that does not have a transponder?

08 Nissan Pathfinder - RF642W Lock Button Locks, Unlock Button Locks, Programming Settings or Wrong Wire?

Fri, 13 Dec 2019 16:25:41 +0000

2008 Nissan Pathfinder S - Standard Key - OEM Alarm

Fortin EVO-ONE With NIS2 Harness

Guide Followed: 75611

Unit was flashed to recommended/newest firmware prior to install.

Service No: 002B07 200206

Everything is installed and working (As far as the Remote Starter Goes). When using the OEM Remotes the vehicle will lock and unlock as it always has. However, when using the RF642W remotes, The remote start works flawlessly (Push button, parking lights on, start/Crank, Run) The lock button locks the doors, but the unlock button also locks them (and does not unlock). The OEM Remote will unlock the door as normal with the remote starter running, but I would really like to not have to carry two remotes with me.

Vehicle Running

Oem Remote: Only Solid Yellow is on, No Blue Flashes

RF642W: Lock - Solid Yellow, Blue Flash - Locks Doors
RF642W: Unlock - Solid Yellow, Blue Flash - Locks Doors

Did I miss a step? Enable/disable a wrong option?

Any help is greatly appreciated. Thank You in advance.