Questions & Answers - Questions récentes tagguées nist1

Evo-Nist1 in nissan 370z

Wed, 06 Aug 2025 08:40:10 +0000

I insalled Evo-Nist1 in my nissan 370z 2013. i connect the brown wire to red brake light wire, the Door pin wire was already in the BCM so i join it with the orginal wire.i added the lock and unlock to the BCM also. when i connect the date wire the evo-all it flash all the three lights but nothing change. the car start normally and lock and unlcok. when i remove the data wire the car keep unlcok unlocking multple times.

i didnt install the bonnet switch.

please i need a soluation.

nissan armada 2019

Tue, 15 Jul 2025 09:22:21 +0000

hi plaese i have nissan armada 2019 iam trying to fix evo all with nis1 harness on step number 8 the blue light switch off at all is not flashing but when i switch off the car blue light will work all time can help plaese

My Remote Start Stopped Working in my G37 Sedan for the RF Controller and OEM controller

Fri, 05 Jan 2024 09:48:07 +0000

My Remote Start has been working just fine since 2017. Lost Remote Start on my oem controller and rf controller. Lock and unlock work fine. Do I need to do an update? Refresh?

Does the lock and unlock wires go into the listed empty slots on a 2019 Nissan Armada using the Evo-Nist1?

Sat, 09 Dec 2023 18:58:12 +0000

The guide says that the lock and unlock wires go into an empty slot.

Start-X Harness taps into only BCM, why does the NIST1 require so much more?

Tue, 14 Dec 2021 12:07:13 +0000

I'm confused about why the evo-all with the NIST1 harness has so many unterminated / spliced / molex connectors, brake switch replacements, start button replacements, obd port replacements... yet doesn't use the BCM harness for any of these functions?

The start-x harness needed none of these connections. The guide also isn't clear about what wires are simply orphaned or why there are molexes on some at modular connectors that already have factory wires.

G37: Unable to program - solid red light as soon as datalink is plugged in

Sat, 11 Feb 2017 22:15:23 +0000

As soon as I plug in the datalink cable, I get a solid red LED.

his happens if I hold the program button, or not. Unable to do master reset or continue with programming, as the unit doesn't do anything besides display one solid red LED. No other plug is plugged in...

2010 Infiniti G37 sedan. EVO-NIST1