/en/qa/tag/police-interceptor Powered by Question2Answer /en/qa/95849/how-to-install-evo-all-on-a-2017-explorer-police-interceptor I have a 2017 Ford Explorer Police Interceptor.  I installed an EVO-All using a Thar-For3 t harness.  I used guide 69061 with 4.01 firmwear and 7 hardware version.  Hood pin (Pink/Black) connected to ground, A16 (purple and yellow) and A1 (yellow) both connected to ignition wire.  The explorer has no alarm system and no transponder. I connect the power and release the button on blue, then connect the remaining connections.  When i turn the ignition to the on position the blue light flashes quickly without turning off.  I then turend the ignition off and use the seperate key fob (lock,unlock, lock).  The evo responds to the locking and unlocking then the red light blinks 5 times and then nothing.  I can turn the car on with the key, remove the key and the car continues to run.  The only way i can turn it back off is unplug the evo.  Any suggestions to try?  Thank you Ford /en/qa/95849/how-to-install-evo-all-on-a-2017-explorer-police-interceptor Sun, 16 Feb 2020 21:36:35 +0000